1. Introduction
The GL.iNet Comet Pro (GL-RM10) is a state-of-the-art Remote KVM (Keyboard, Video, Mouse) device designed for seamless remote access and management of your computer. Featuring Wi-Fi 6 connectivity, 4K@30Hz video passthrough, a responsive touchscreen interface, and 32GB of built-in eMMC storage, the Comet Pro offers robust and flexible control over your systems from anywhere.
This manual will guide you through the installation, operation, and maintenance of your Comet Pro device, ensuring you can maximize its capabilities for remote desktop management, disaster recovery, and more.
Package Contents
Before you begin, please verify that all items are present in your package:

Figure 1: Comet Pro (GL-RM10) Remote Control Kit Contents
Includes: 1x User manual, 1x Thank you card, 1x Comet Pro (GL-RM10) device, 1x Ethernet cable, 1x USB cable (Type-A to Type-C), 1x USB cable (Type-C to Type-C), 2x HD cables, 1x Power adapter, 1x Converter (US plug).

Figure 2: Power Adapter Plug Types
Note: Available plug types include US, EU/UK, and AU. Please ensure you have the correct plug for your region.

Figure 3: ATX Board Package Contents (if purchased separately)
Includes: 1x ATX Board, 1x Screw Package, 1x ATX Bracket Set, 1x 9 PIN Wire Set, 1x USB-A to Type-C Cable.

Figure 4: Fingerbot Package Contents (if purchased separately)
Includes: 1x User Guide, 1x Adhesive Tape, 1x Add-on, 1x CR2 Battery, 1x Laptop Stand, 1x FGB-01 Fingerbot.
2. Key Features
- Wi-Fi 6 Connectivity: High-speed, low-latency wireless connection supporting multiple devices concurrently, ideal for demanding network environments.
- 4K@30Hz Video Passthrough: Supports 4K high-definition video output at 30 frames per second, suitable for high-resolution monitoring and presentations.
- Two-Way Audio: Enables real-time bidirectional voice transmission for remote collaboration and intercom functionalities.
- 2.22-inch Touchscreen Interface: Intuitive touch operation for simplified device configuration and management without external peripherals.
- 32GB eMMC Storage: Large internal storage capacity for system files, logs, and backup data.
- Remote Disaster Recovery: Facilitates remote backup and rapid fault recovery for critical systems.
- Gigabit Ethernet: Provides stable, high-bandwidth wired connectivity for reliable network performance.
- Multiple Boot Methods: Supports Wake-on-LAN, ATX Board hard boot, and Fingerbot physical control for flexible PC management.

Figure 5: Overview of Comet Pro Features
Highlights include 32GB eMMC, 1GB DDR3L Memory, 2.22-inch Touchscreen, Wi-Fi 6, 4K Video Passthrough, Ultra-low Latency (30-60ms), Gigabit LAN, and Self-hosted Server capabilities.
3. Technical Specifications
| Feature | Specification |
|---|---|
| Brand Name | GL.iNet |
| CPU | Quad Core ARM Cortex-A53 |
| Memory | DDR3L 1GB |
| Storage | 32GB eMMC |
| Display Screen | 2.22 inch, Touchscreen |
| Wi-Fi Protocol | IEEE 802.11 a/b/g/n/ac/ax (Wi-Fi 6) |
| Ethernet Speed | 10/100/1000Mbps (Gigabit) |
| Resolution | 4K@30fps |
| Power Input | Type-C, 5V/2A with PD Compatible |
| Dimensions | 93 x 84 x 47 mm |
| Weight | 170g |
| Interface | 1x USB Type-C (Keyboard, Mouse), 1x Gigabit Ethernet port, 1x HD In, 1x HD Out, 1x USB 2.0 Type-A |

Figure 6: Comet Pro (GL-RM10) vs. Comet PoE (GL-RM1PE) Comparison
Highlights Comet Pro's advantages in Wi-Fi 6, HD Passthrough, Type-C power, Touchscreen, Tailscale, File Transfer, and Cloud Service over Comet PoE.
4. Setup Guide
4.1 Initial Connection
- Power Connection: Connect the provided Type-C power adapter to the Comet Pro device and plug it into a power outlet. The device will power on automatically.
- KVM Connection:
- Connect the included USB Type-C to Type-C cable from the Comet Pro's USB Type-C port (labeled KVM) to your target computer's USB port. This provides keyboard and mouse control.
- Connect one of the HD cables from the Comet Pro's HD-IN port to your target computer's video output port.
- If you wish to use a local monitor, connect the second HD cable from the Comet Pro's HD-OUT port to your local monitor's HD input.
- Network Connection:
- For wired connection, connect the Ethernet cable from the Comet Pro's Gigabit Ethernet port to your network router or switch.
- For wireless connection, proceed to section 5.1 to configure Wi-Fi.

Figure 7: Comet Pro with Essential Connections
Illustrates the device connected with Ethernet, USB, and HD cables.
4.2 Remote Boot Options (Optional Accessories)
The Comet Pro supports various methods to remotely power on or manage your PC, even from a complete shutdown state. These require separate accessories:
- Wake-on-LAN (WOL): Configure your PC's BIOS/UEFI and network adapter settings to enable WOL. This allows you to turn on your computer remotely via the network.
- ATX Board: For advanced power management, install the ATX Board (purchased separately) into your PC. This allows booting and managing your computer even when it's completely off. Refer to the ATX Board's specific installation guide for detailed instructions.
- Fingerbot: The Fingerbot (purchased separately) can physically press the power button on your PC, enabling instant wake, reboot, or recovery of crashed systems.

Figure 8: Three Boot Methods for Remote PC Management
Depicts Wake-on-LAN for remote power-on, ATX Board for managing a powered-off PC, and Fingerbot for physical power control.
5. Operation Guide
5.1 Touchscreen Interface
The 2.22-inch touchscreen provides a direct and intuitive way to interact with the Comet Pro. You can easily check the device's IP address, configure Wi-Fi settings, and manage cloud services directly from the screen.

Figure 9: User-Friendly Touchscreen Interface
Shows the touchscreen displaying the device IP address and icons for KVM, HD-IN, HD-OUT, and USB functions.
5.2 Wi-Fi 6 Connectivity
To connect your Comet Pro to a Wi-Fi network:
- Access the Wi-Fi settings via the touchscreen interface.
- Select your desired Wi-Fi network from the list of available networks.
- Enter the Wi-Fi password if prompted.
- Once connected, the device will display its assigned IP address.

Figure 10: Wi-Fi 6 Connectivity in Action
Demonstrates the Comet Pro connected wirelessly, freeing it from Ethernet cable constraints.
5.3 4K Video Passthrough
The Comet Pro supports native 4K@30FPS video passthrough. When connected to a local monitor via the HD-OUT port, you can view the target computer's display simultaneously with remote access, without needing additional accessories.

Figure 11: Native 4K@30FPS Video Passthrough
Shows the Comet Pro connected to a local monitor for simultaneous local and remote display.
5.4 Two-Way Audio
The device facilitates clear two-way audio transmission, enabling seamless communication during remote sessions. This is particularly useful for remote collaboration, technical support, or intercom scenarios.

Figure 12: Clear Two-Way Audio for Remote Meetings
Illustrates a user engaging in a remote meeting with immersive two-way audio transmission.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosols.
- Firmware Updates: Regularly check for and install firmware updates to ensure optimal performance and security. Updates can typically be managed via the device's web interface or touchscreen.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Cable Management: Ensure all cables are securely connected and not under strain to prevent damage.
7. Troubleshooting
Common Issues and Solutions:
- No Power:
- Ensure the Type-C power adapter is securely connected to the device and a working power outlet.
- Verify the power adapter is functioning correctly.
- No Video Output:
- Check all HD cable connections between the Comet Pro, your target PC, and any local monitor.
- Ensure the target PC is powered on and outputting video.
- Verify the correct input source is selected on your local monitor.
- No Keyboard/Mouse Control:
- Ensure the USB Type-C KVM cable is properly connected between the Comet Pro and your target PC.
- Try connecting a different keyboard/mouse directly to the target PC to rule out peripheral issues.
- Cannot Access PC Remotely (PC is offline/off):
- If your PC is off, ensure Wake-on-LAN is configured correctly in your PC's BIOS/UEFI and network adapter settings.
- If using an ATX Board or Fingerbot, ensure they are correctly installed and configured according to their respective manuals.
- Verify the Comet Pro has an active network connection (wired or Wi-Fi).
- Wi-Fi Connection Issues:
- Check if the Wi-Fi network is active and within range.
- Re-enter the Wi-Fi password via the touchscreen to ensure it's correct.
- Restart the Comet Pro and your Wi-Fi router.

Figure 13: Addressing Remote Access Challenges
Highlights how the Comet Pro (GL-RM10) with optional Fingerbot overcomes common remote software limitations like offline PCs or inability to boot into safe mode.
8. User Tips
- For optimal performance, ensure your target PC's graphics drivers are up to date, especially when utilizing 4K video passthrough.
- When setting up remote access, consider using a strong, unique password for the Comet Pro's web interface and any associated cloud services.
- If experiencing latency, try a wired Ethernet connection for the Comet Pro, or ensure your Wi-Fi 6 network is optimized and free from interference.
9. Warranty and Support
The GL.iNet Comet Pro (GL-RM10) comes with a 2-year warranty, ensuring peace of mind regarding product quality and performance.
For technical support, troubleshooting assistance, or warranty claims, please visit the official GL.iNet website or contact their customer service department. Keep your purchase receipt and product serial number handy for faster service.

Figure 14: GL.iNet Comet Pro with Warranty Information
The main product image highlighting the 2-year warranty.