1. Introduction
This manual provides essential information for the safe operation, setup, and maintenance of your Eachine E135 RC Helicopter. Please read this manual thoroughly before operating the helicopter to ensure proper function and to prevent damage or injury.
Safety Warnings
- Age Recommendation: This product is not suitable for children under 14 years of age. Adult supervision is recommended for all users.
- Flight Environment: Operate the helicopter in open areas, away from people, animals, buildings, and other obstacles. Avoid flying in windy conditions.
- Battery Safety: Always use the provided charger and follow battery charging guidelines. Do not overcharge or short-circuit batteries.
- Blade Safety: Keep hands, face, and loose clothing away from rotating blades.
2. Package Contents
Verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.

- 1 x E135 RC Helicopter
- 1 x Transmitter (Remote Control)
- 1 x USB Charger
- 2 x LI-POLY 7.4V(1200MAH) 25C Battery
- 1 x Tail Blade
- 4 x Main Blades
- 1 x User Manual
- 1 x Hexagon Wrench
- 1 x Screwdriver
3. Specifications
| Feature | Detail |
|---|---|
| Model | E135 (EC135 Scale) |
| Type | HELICOPTER |
| Material | Plastic (High strength composite material, Nylon + Carbon Fiber for blades) |
| Rotor Diameter | 330mm |
| Body Length | 350mm |
| Height | 120mm |
| Weight (Drone/Takeoff) | 228g |
| Remote Control | Yes, 2.4GHz Communication Protocol |
| Remote Distance | More than 120 meters |
| Control Channels | 6 channels |
| Controller Mode | MODE1 |
| Controller Battery | AA (Not included) |
| Helicopter Battery | LI-POLY 7.4V(1200MAH) 25C (Intelligent module battery) |
| Flight Time | 9-12 minutes |
| Charging Time | Approximately 60 minutes |
| Charging Voltage | 7.4V |
| Motor | 2408 1100KV Brushless (Main), 1204 4200KV Brushless (Tail) |
| Stabilization | 6-axis gyroscope, Electronic Stability Enhancement System |
| Positioning | High-precision visual (optical flow) positioning, Air pressure fixed-altitude mode |
| Anti-wind Ability | 3 Class (Can fly accurately in 4-5 winds with 3 servos) |
| Operator Skill Level | Beginner, Intermediate |
| Indoor/Outdoor Use | Indoor-Outdoor |
| State of Assembly | Ready-to-Go |


4. Setup
4.1. Battery Charging
The E135 helicopter uses a LI-POLY 7.4V(1200MAH) 25C intelligent module battery. This battery features charging protection and low power protection. Use the dedicated USB charger provided in the package.
- Connect the USB charger to a compatible USB power source (e.g., computer USB port, USB wall adapter).
- Connect the helicopter battery to the USB charger.
- The charging time is approximately 60 minutes. The charger's indicator light will show the charging status (refer to charger instructions for specific light patterns).
The intelligent module battery uses a general TYPE-C plug, making charging convenient.
4.2. Remote Control Battery Installation
The remote control requires AA batteries (not included). Open the battery compartment on the back of the remote control and insert the batteries, ensuring correct polarity.
4.3. Remote Control Pairing and Calibration
Before your first flight, you need to pair the remote control with the helicopter and calibrate the joysticks.

- Ensure both the helicopter and remote control are powered off.
- Power on the helicopter.
- Power on the remote control.
- Press and hold the 'Frequency Pairing Button' on the remote control (refer to Figure 4.1 for location).
- To calibrate joysticks, press the designated button upon turning on the transmitter (labeled as 'Press this button to calibrate joysticks upon turn on Transmitter One-key Landing' in Figure 4.1).
- Wait for the pairing process to complete. The indicator lights on both devices will confirm a successful connection.
5. Operating Instructions
The Eachine E135 features a 6-axis gyroscope and an electronic stability enhancement system for stable and precise flight, making it suitable for beginners.
5.1. Basic Flight Controls
Refer to Figure 4.1 for the remote control layout.
- Throttle/Rudder Joystick: Controls altitude (up/down) and yaw (left/right rotation). Long press to lock/short press to unlock.
- Aileron/Elevator Joystick: Controls forward/backward movement and left/right side flying.
- Trim Buttons: Used to fine-tune the helicopter's stability if it drifts in any direction.
- Pitch Setting: Adjusts the pitch of the main blades.
- Power Switch: Turns the remote control on/off.

5.2. Advanced Features
- One-Key Landing: Press the 'One-key Landing' button on the remote control for an easy and controlled descent.
- Optical Flow Positioning: The helicopter uses high-precision visual (optical flow) positioning and air pressure fixed-altitude mode. This allows for fixed-point functions both indoors and outdoors (limited height), making it easier for beginners to maintain position.
- One-Key Reverse: The helicopter supports one-key reverse flight. This maneuver should be performed outdoors in an open area with no wind or breeze. Note that the vehicle is only open for forward and backward roll, not for left and right roll.


6. Maintenance
6.1. General Care
- Keep the helicopter clean and free from dust and debris.
- Store the helicopter in a cool, dry place away from direct sunlight.
- Avoid exposing the helicopter to extreme temperatures or moisture.
6.2. Blade Inspection and Replacement
The main and tail blades are made of durable nylon + carbon fiber composite material. Regularly inspect the blades for any signs of damage, cracks, or deformation. If a blade is damaged, replace it immediately using the provided tools and spare blades to ensure safe flight performance.
6.3. Battery Care
The LI-POLY battery has functions to prevent overcharging, over-discharging, and low-battery indication. To prolong the service life of the battery:
- Always fully charge the battery before use.
- Do not leave the battery charging unattended.
- Disconnect the battery from the helicopter when not in use.
- Store batteries in a safe place, away from flammable materials.
7. Troubleshooting
If you encounter issues with your Eachine E135 helicopter, refer to the following common problems and solutions:
- Helicopter does not respond to remote control:
- Ensure both the helicopter and remote control are powered on.
- Check if the batteries in both devices are fully charged.
- Re-pair the remote control with the helicopter as described in Section 4.3.
- Helicopter drifts during flight:
- Use the trim buttons on the remote control to adjust for drift.
- Ensure you are flying in an area with minimal wind.
- Check for any physical damage to the blades or rotor system.
- Short flight time:
- Ensure the helicopter battery is fully charged before each flight.
- Battery performance can degrade over time; consider replacing old batteries.
- Helicopter does not take off:
- Verify that the main blades are installed correctly and are not obstructed.
- Check for sufficient battery power in both the helicopter and remote control.
- Low Battery Reminder: The helicopter features a two-way return low battery reminder for safer flight. If you receive this alert, land the helicopter immediately.
8. User Tips
- The Eachine E135 is designed with features like a 6-axis gyroscope and optical flow positioning, making it especially suitable for beginners to achieve stable flight and easy control.
- Novices will find the one-touch landing function particularly helpful for smooth descents.
- While the helicopter has a 3 Class anti-wind ability and can handle 4-5 winds with its 3 servos, for the best experience and to perform advanced maneuvers like one-key reverse, it is recommended to fly in calm conditions.
- Remember that the one-key reverse function only supports forward and backward rolls, not left and right rolls.
9. Warranty and Support
For warranty information, technical support, or replacement parts, please refer to the contact information provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.