1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Growatt WIT Series Hybrid Solar Inverter and APX Energy Storage Battery System. This all-in-one BESS (Battery Energy Storage System) is designed for distributed energy storage, offering robust performance and flexible configuration for various power needs.
The system supports multi-system operation in parallel and provides 100% three-phase unbalanced output. It features flexible capacity options ranging from 71kWh to 114kWh, with module-level energy optimization. The modular and stacked design ensures easy installation and allows for mixing new and old battery modules within a single system. Key functionalities include UPS (Uninterruptible Power Supply) and black start capabilities, ensuring a long lifespan with a 10-year warranty.
2. Key Features
- Distributed Energy Storage: Supports multi-system operation in parallel with 100% three-phase unbalanced output.
- Flexible Capacity: Options from 71kWh to 114kWh, with module-level energy optimization.
- Modular Design: Easy installation with a modular and stacked design, allowing for integration of new and old battery modules.
- UPS Function & Black Start: Provides uninterruptible power supply and black start capabilities for enhanced reliability.
- Long Lifespan: Designed for durability with a 10-year warranty.
- High Safety: Features 6000 cycles with 90% DOD (Depth of Discharge) and high-quality prismatic battery cells.
- Intelligent BMS: Equipped with an independent smart Battery Management System to manage power output effectively.
- Wide Compatibility: Compatible with most available Hybrid inverters.
- Backup Protection: Stores energy, detects outages, and automatically provides backup power.
- Plug and Play: Simple installation and setup.
- Safety Certifications: UL1642, IEC62619, CE, UN38.3, MSDS certified.
- Hybrid Inverter Capabilities: Scalable system configuration (extendable to 300kW), 110% continuous AC overloading capacity, remote control of DG (Diesel Generator), multiple MPPTs input, and grid-support functions.
3. Setup and Installation
The Growatt BESS is designed for easy installation with its modular and stacked design. Each component comes with detailed installation instructions. For secure and correct wiring, it is highly recommended to consult or hire a qualified electrician.
3.1 System Components
The system typically includes:
- Solar Panels (PV array)
- Growatt WIT Series Hybrid Solar Inverter
- Growatt APX Energy Storage Battery System
- Utility Grid Connection
- Optional: Generator
- Home Loads
- WiFi/GPRS Module for Monitoring
3.2 Wiring Diagram
Refer to the following diagram for the general system connection. Ensure all connections are made according to local electrical codes and safety standards.
3.3 Battery Module Installation
The APX battery modules are designed for stacked installation. Connect the modules as per the provided instructions, ensuring proper polarity and secure connections. Once the batteries are plugged in, the system is ready for operation.
3.4 Inverter Installation
Mount the Growatt WIT Series Hybrid Inverter in a suitable location, ensuring adequate ventilation and protection from environmental elements. Connect the solar PV input, battery input, grid connection, and AC output to home loads as shown in the wiring diagram.
4. Operating Instructions
Once the system is fully installed and all connections are verified, you can begin operation.
4.1 System Start-up
- Ensure all circuit breakers and disconnects are in the OFF position.
- Turn on the battery disconnect switch.
- Turn on the DC disconnect switch for the solar panels.
- Turn on the AC disconnect switch for the utility grid.
- Turn on the AC output breaker to your home loads.
- Follow the inverter's display prompts for initial setup and configuration.
4.2 Monitoring
The system includes a WiFi/GPRS module for remote monitoring. Install the dedicated monitoring application on your smartphone or access the monitoring web portal to view real-time performance data, energy flow, and system status.
4.3 UPS and Black Start Function
In the event of a grid outage, the inverter will automatically switch to battery power, providing an uninterruptible power supply to your connected loads. The black start function allows the system to initiate operation and power loads even without a grid connection or solar input, using only the stored battery energy.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Growatt BESS. Always disconnect power before performing any maintenance.
- Visual Inspection: Periodically inspect all cables, connections, and components for any signs of wear, damage, or corrosion.
- Cleaning: Keep the inverter and battery modules clean and free from dust and debris. Ensure ventilation openings are not obstructed. If applicable, clean solar panels regularly to maximize energy harvest.
- Firmware Updates: Check for and apply any available firmware updates for the inverter and BMS to ensure optimal performance and security.
- Battery Health Check: Monitor battery performance through the monitoring app. Report any unusual behavior or significant drops in capacity to technical support.
6. Troubleshooting
If you encounter any issues with your Growatt BESS, refer to the inverter's display for error codes or messages. Common issues can often be resolved by checking connections and ensuring proper power flow.
- System Not Powering On: Verify all disconnect switches and circuit breakers are in the ON position. Check battery connections and charge level.
- Low Power Output: Inspect solar panels for shading or dirt. Check inverter error codes.
- Communication Issues: Ensure the WiFi/GPRS module is properly connected and configured. Check internet connectivity.
For complex issues or persistent problems, please contact Growatt technical support or your certified installer.
7. Specifications
7.1 Battery System Data
| Parameter | APX 71.6P-S1 | APX 86.0P-S1 | APX 100.3P-S1 | APX 114.6P-S1 |
|---|---|---|---|---|
| Number of battery modules | 5 | 6 | 7 | 8 |
| Nominal energy | 71.68kWh | 86.01kWh | 100.35kWh | 114.68kWh |
| Max output power | 50kW | 63kW | 75kW | 100kW |
| Operating voltage range | 650V-940V | |||
| Battery capacity (per module) | 14.34kWh | |||
| Battery type | Cobalt Free Lithium Iron Phosphate (LFP) | |||
| BMS | Yes | |||
| Communication port | CAN | |||
| Control module | APX 100.0ES-P1-EU | |||
7.2 Hybrid Inverter Data
| Parameter | WIT 50K-H/-HU | WIT 63K-H/-HU | WIT 75K-H/-HU | WIT 100K-H/-HU |
|---|---|---|---|---|
| PV Input Data | ||||
| Max. recommended PV power (for module STC) | 109.2kW | 126.8kW | 150kW | 156kW |
| Max. input voltage | 1000V | |||
| MPPT voltage range | 180-800V | |||
| Max. short-circuit current per MPPT tracker | 40A | |||
| MPPTs | 4 | 6 | 8 | 10 |
| AC Side Data (On-grid) | ||||
| AC nominal power | 50kW | 63kW | 75kW | 100kW |
| Max. output current | 79.7A@400V | 100.4A@400V | 119.4A@400V | 158.8A@400V |
| Nominal AC voltage | 380V-415V | |||
| AC voltage range | -15%~+10% | |||
| Nominal grid frequency/frequency range | 50Hz/60Hz, 45-55Hz/55-65Hz | |||
| Power factor (adjustable) | 0.8 leading - 0.8 lagging | |||
| Adjustable power factor | -1~+1 | |||
| THDI | <3% | |||
| Grid connection type | 3P3W/3P4W+PE | |||
| AC Side Data (Off-grid) | ||||
| AC nominal power | 50kW | 63kW | 75kW | 100kW |
| Max. AC output power | 63kVA | 78kVA | 90kVA | 120kVA |
| Max. output current | 90.9A | 112.6A | 129.9A | 173.2A |
| Nominal AC voltage | 220V/230V/240V(L-N), 380V/400V/415V(L-L) | |||
| Nominal grid frequency | 50Hz/60Hz | |||
| THDV | <2%@linear load, <3%@non-linear load | |||
| AC grid connection type | 3P4W+N | |||
| Load unbalance | 100% unbalanced load, <1% unbalance | |||
| Overload capacity | <110% Continuous, 110%-120%@10min, >120%@200ms | |||
| On/Off-grid transfer time | <20ms | |||
| System Data | ||||
| Protection class | IP66 | |||
| External interfaces | RS485/CAN, WLAN/4G (optional) | |||
| Cooling mode | Smart air cooling | |||
| Operating temperature | -25°C~60°C | |||
| Relative humidity | 0%~95% | |||
| Topology | Transformerless | |||
| Warranty (BESS) | 10 years | |||
8. User Tips
- Professional Installation: While each part has installation instructions, for products involving wire connections and high voltage, it is strongly recommended to find a certified electrician to ensure safety and proper setup.
- Battery Type Clarification: This system utilizes actual Lithium Ion (specifically Cobalt Free Lithium Iron Phosphate - LFP) batteries for energy storage, not just a general storage unit.
- Remote Monitoring: Utilize the monitoring app or web interface to keep track of your system's performance and health. This can help in early detection of potential issues.
- Environmental Considerations: Ensure the system is installed within the specified operating temperature and humidity ranges to maximize efficiency and lifespan.
9. Warranty and Support
9.1 Warranty
The Growatt WIT Series Hybrid Solar Inverter and APX Energy Storage Battery System comes with a 10-year warranty. During the warranty period, if a product problem arises, our engineers will first propose a solution based on the specific situation. If the problem persists, a refund or free replacement will be provided.
9.2 Technical Support
Technical support is available, including installation manuals for guidance. For any inquiries or assistance, please contact:
- WhatsApp: +86 13295687202
- Email: sunshinesolar01@163.com
Please have your product model and any relevant error codes ready when contacting support to facilitate a quicker resolution.