1. Introduction
The Sub250 OasisFly35 DC is a high-performance FPV drone designed for freestyle racing and aerial photography. It features a robust DC structure frame, powerful 1804 brushless motors, and supports various camera systems including 4K UHD. Equipped with standard GPS, it offers enhanced flight confidence and rescue capabilities. This manual provides essential information for setting up, operating, and maintaining your drone.

2. Safety Information
⚠️ WARNING: Not suitable for children under 36 months due to small parts.
- Always operate the drone in open, unobstructed areas, away from people, animals, and property.
- Familiarize yourself with local regulations regarding drone operation.
- Perform pre-flight checks before each flight.
- Maintain visual line of sight with the drone at all times.
- Ensure batteries are fully charged and securely installed.
- Avoid flying in strong winds or adverse weather conditions.
3. Package Contents
Verify that all items are present in your package. The exact contents may vary slightly based on the purchased version (O4Pro, Analog, or WTFPV).

Main Components:
- OasisFly35DC Complete Machine x 1
- HQ T3.5*3.5*3 (Bag) Propellers x 2
- Left side panel x 1
- Right Side Panel x 1
- Right Tail Side Panel x 1
- Left Tail Side Panel x 1
- O3 Version Silicone Pads (Pair) x 1
- Battery Anti-slip Pad x 1
- Simulated Lens Print (Pair) x 1
- Honeycomb Aluminum Column x 2
- USB-C Adapter Board x 1
- Dual-head SH1.0-6P Female Terminal / Male Housing Wire x 1
- M2 Hex Mini Screwdriver x 1
- EVA Shock-Absorbing Feet x 8
- 11*170mm Cable Ties x 1
- TPU Shock-Absorbing Feet x 4
Included Spare Screws:

- M2*16 Button Head Socket Cap Screw x 2
- M2*12 Pan Head Socket Cap Screw x 2
- M2*9 Pan Head Socket Cap Screw x 8
- M2*7 Button Head Socket Cap Screw x 8
- M2*5 Pan Head Socket Cap Screw x 4
- M2*4.5 Pan Head Socket Cap Screw x 2
- M2 Hex Nut x 2
4. Specifications
The OasisFly35 DC drone is available in multiple versions, each with specific configurations. Refer to the table below for detailed product parameters.

| Product Name | OasisFly35 DC O4 Pro | OasisFly35 DC Analog | OasisFly35 DC WTFPV |
|---|---|---|---|
| Rack | Sub250 OasisFly35 DC | ||
| Main carbon plate thickness | 2.5mm | ||
| Wheelbase | 175mm | ||
| Flight system | Sub250 RedFox A3 45A AIO | ||
| MCU | STM32F722 | ||
| Gyroscope | ICU 42688-P | ||
| Flash | 16MB | ||
| Flight controller firmware | 4.5.2 | ||
| Electric Tune | 45A | ||
| Dyed Leaves | HQ 3.5*3.5*3 | ||
| Battery Port | XT30 | ||
| Receiver | PNP (O4Pro built-in receiver)/ELRS 2.4G | / | / |
| Motor | SUB250 1804 3450KV | ||
| Recommended battery | 4S 530mAh | ||
| Flight time | 5-6 minutes | 7 minutes | / |
| FPV Antenna | DJI O4 AirUnit Pro Antenna | Momoda-MMCX90 | / |
| Lenses | DJI O4 AirUnit Pro Camera Module | Caddx H1 Camera | / |
| Image transmission | DJI O4 AirUnit Pro Transmitter Module | Sub250 Send T1600 VTX Transmitter | / |
| Weight | 194g±3 | 188g±3 | 162g±3 |
Note: All flight times are tested in slow cruise mode. Actual flight time is affected by product individual differences, firmware versions, flying skills, and environmental factors. Data is for reference only.
General Specifications:
- Drone Weight: 200g
- Video Capture Resolution: Other, 4K UHD
- Operator Skill Level: Beginner, Intermediate, Expert
- Indoor/Outdoor Use: Indoor-Outdoor
- Camera Mount Type: Other
- Controller Mode: MODE2
- Certification: CE
- Power Source: Electric (Lithium battery)
- Remote Control: Yes
- Aerial Photography: Yes
- Material: Carbon Fiber, Plastic
- State of Assembly: Almost Ready
- Features: Integrated Camera, FPV Capable
- Recommend Age: 14+ years
- Anti-wind Ability: Middle
5. Setup Guide
5.1 Initial Assembly
The OasisFly35 DC drone comes "Almost Ready" for flight, meaning minimal assembly is required. Typically, this involves:
- Propeller Installation: Carefully attach the propellers to the motors. Ensure they are oriented correctly according to the motor rotation direction (usually indicated on the motor or frame). Use the provided screws and screwdriver.
- Side Panels: If not pre-installed, attach the left and right side panels, and tail panels using the provided hardware. These panels are engineered for flight and heat dissipation.
- Battery Anti-slip Pad: Secure the battery anti-slip pad to the drone's battery mounting area.
- TPU Shock-Absorbing Feet: Attach the TPU shock-absorbing feet to the landing gear for improved stability and impact resistance.
5.2 Battery and Power
The drone requires a 4S 530mAh Lithium battery (not included). Ensure you use a compatible battery with an XT30 connector.
- Charge the battery fully before first use.
- Connect the battery securely to the XT30 battery port on the drone.
- Ensure the battery is properly secured with the battery anti-slip pad and any provided straps to prevent movement during flight.
5.3 Remote Controller Setup
The drone supports Remote Control (MODE2). A compatible remote controller is required and is not included with the PNP versions. For ELRS 2.4G versions, an ELRS 2.4G compatible remote controller is needed.
- Refer to your remote controller's manual for binding instructions with the drone's receiver.
- Ensure the controller's battery is charged.
5.4 Camera and Video Transmission
The OasisFly35 DC supports various camera and video transmission systems, including DJI O4 Pro, Analog, and WTFPV versions. The O4Pro version includes a DJI O4 AirUnit Pro Camera Module and Transmitter Module for HD video.

- Ensure your FPV goggles or monitor are compatible with your drone's video transmission system (e.g., DJI O4 for O4Pro version, analog for Analog version).
- Follow the specific instructions for your camera and VTX system for initial setup and channel selection.
5.5 GPS Module
All models come standard with a GPS module, enhancing flight confidence and enabling rescue functions.

- Ensure the GPS module has a clear view of the sky for optimal satellite acquisition.
- The GPS rescue function can be activated via a remote control channel or set conditions automatically.
6. Operating Instructions
6.1 Pre-Flight Checks
Before every flight, perform the following checks:
- Verify all propellers are securely attached and undamaged.
- Ensure the battery is fully charged and properly secured.
- Check that the remote controller is powered on and bound to the drone.
- Confirm FPV goggles/monitor are receiving a clear video feed.
- Check for any loose wires or components on the drone.
- Ensure you have sufficient clear space for flight.
6.2 Taking Off and Landing
Refer to your flight controller's firmware documentation (e.g., Betaflight) for specific arming and flight mode procedures. Generally:
- Place the drone on a flat, level surface.
- Arm the motors using the designated switch or stick command on your remote controller.
- Gently increase throttle to lift off.
- To land, slowly decrease throttle while maintaining control, aiming for a soft touchdown.
6.3 GPS Rescue Function
The GPS rescue function is designed to help recover the drone in complex environments or if signal is lost. It can be activated manually via a remote control channel or automatically under predefined conditions.
- Ensure GPS lock is acquired before activating this function.
- Consult your flight controller's configuration for setting up and customizing GPS rescue parameters.
6.4 Camera Operation
The drone supports 4K UHD video capture, making it suitable for high-quality aerial photography and videography.

- For O4Pro versions, refer to the DJI O4 AirUnit Pro manual for camera settings and recording.
- For Analog/WTFPV versions, refer to the specific camera manual for operation.
- The 7-series aluminum lens support provides protection for the camera.
7. Maintenance
- Propellers: Regularly inspect propellers for cracks, bends, or damage. Replace immediately if any damage is found.
- Motors: Keep motors free from dirt, dust, and debris. Check for smooth rotation.
- Frame: Inspect the carbon fiber and plastic frame components for any signs of stress or damage after hard crashes.
- Battery Care: Store Lithium batteries at a storage voltage (around 3.8V per cell) when not in use for extended periods. Do not overcharge or over-discharge.
- Cleaning: Use a soft, dry cloth to clean the drone. Avoid using liquids directly on electronic components.
8. Troubleshooting
- No Power: Ensure the battery is fully charged and correctly connected. Check for any loose XT30 connections.
- No Video Feed: Verify FPV goggles/monitor are on the correct channel and compatible with the drone's VTX. Check VTX and camera connections.
- Drone Not Arming: Check remote controller connection and calibration. Ensure all safety switches are disengaged. Review flight controller OSD messages for error codes.
- Unstable Flight: Inspect propellers for damage or incorrect installation. Check for loose motors or frame components. Recalibrate accelerometers if necessary.
- GPS Issues: Ensure the drone has a clear view of the sky. Wait for sufficient satellite lock before attempting GPS-dependent functions.
9. User Tips
- Version Compatibility: The OasisFly35 DC comes in several versions (O4Pro, Analog, WTFPV). If you purchased the O4Pro version, it includes a DJI O4 Air Unit Pro for superior digital video transmission. Other versions will require compatible analog or WTFPV systems. Always confirm your drone's version and ensure your FPV gear matches.
- Practice in a Simulator: For beginners, practicing in an FPV simulator can significantly improve piloting skills and reduce the risk of damage to your physical drone.
- Battery Management: Invest in good quality 4S 530mAh batteries and a reliable charger. Proper battery care extends their lifespan and ensures consistent flight performance.
- Firmware Updates: Periodically check for firmware updates for your flight controller (e.g., Betaflight) and VTX/camera system. Updates can bring new features, performance improvements, and bug fixes.
10. Warranty and Support
For specific warranty information, technical support, or replacement parts, please contact the seller or manufacturer directly. Keep your proof of purchase for any warranty claims.