Introduction
The SMAILWOLF MK95 is a versatile mechanical keyboard designed for both desktop and laptop use. It features a 94-key Korean layout, full-key hot-swappable switches, and three connection modes: Bluetooth, 2.4G wireless, and wired (Type-C). Enjoy a customized typing experience with vibrant RGB lighting effects and durable PBT plastic keycaps.
Setup
Package Contents
Before you begin, ensure all items are present in the package:
- SMAILWOLF MK95 Mechanical Keyboard
- USB Type-C Cable
- 2.4G Wireless Receiver (if applicable)
- User Manual (this document)
Connecting Your Keyboard
The MK95 supports three connection modes: Bluetooth, 2.4G Wireless, and Wired (Type-C). Choose the mode that best suits your needs.
- Wired Connection (Type-C):
- Connect the provided USB Type-C cable to the keyboard's port and the other end to your computer's USB port.
- The keyboard will be automatically recognized and ready for use.
- 2.4G Wireless Connection:
- Locate the 2.4G wireless receiver (usually stored in a compartment on the keyboard).
- Plug the receiver into an available USB port on your computer.
- Turn on the keyboard's power switch (if present) and select the 2.4G mode. The keyboard should connect automatically.
- Bluetooth Connection:
- Ensure the keyboard is powered on and in Bluetooth pairing mode (refer to keyboard indicators or specific key combinations if available).
- On your device (laptop, tablet, phone), go to Bluetooth settings and search for new devices.
- Select "SMAILWOLF MK95" from the list of available devices to pair.
Operating Instructions
Basic Key Functions
The MK95 features a 94-key layout with a Korean language overlay. Standard alphanumeric and function keys operate as expected. The keyboard also includes a convenient knob for volume control or other customizable functions.
RGB Lighting Control
The keyboard offers multiple RGB lighting modes and customization options:
- FN + Del key: Toggle between different backlight effects.
- FN + ↑ / ↓: Adjust backlight brightness. The indicator will flash 3 times when reaching minimum or maximum brightness.
- FN + ← / →: Adjust backlight speed. The indicator will flash 3 times when reaching minimum or maximum speed.
- FN + Right Shift + !: Activate Custom Lighting 1 mode.
- FN + N: Light recording/saving function.
- FN + C: Toggle side light effects.
- FN + Spacebar: Turn off the backlight.
Video Demonstration
Maintenance
Cleaning
- Use a soft, dry cloth to wipe the keyboard surface.
- For deeper cleaning, use compressed air to remove dust and debris from between the keycaps.
- Keycaps can be removed for thorough cleaning (see 'Keycap and Switch Replacement').
Keycap and Switch Replacement (Hot-Swappable)
The MK95 features full-key hot-swappable switches, allowing for easy customization and maintenance.
- Removing Keycaps: Gently pull the keycap upwards using a keycap puller (not included, but recommended) or your fingers.
- Removing Switches: Once the keycap is removed, use a switch puller (not included) to carefully grip the top and bottom clips of the switch and pull it straight out.
- Installing Switches: Align the pins of the new switch with the holes on the PCB. Press the switch firmly until it clicks into place. Ensure the pins are not bent.
- Installing Keycaps: Place the keycap over the switch stem and press down gently until it is secure.
Note: Always ensure the keyboard is disconnected or powered off before performing any maintenance involving switch or keycap removal.
Troubleshooting
- Keyboard not responding (Wired): Ensure the USB Type-C cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
- Keyboard not responding (2.4G Wireless): Check if the 2.4G receiver is properly plugged into a USB port. Ensure the keyboard is in 2.4G mode and fully charged. Try re-pairing by unplugging and re-plugging the receiver.
- Keyboard not responding (Bluetooth): Make sure Bluetooth is enabled on your device and the keyboard is in Bluetooth pairing mode. Remove the keyboard from your device's Bluetooth list and try pairing again. Ensure the keyboard is charged.
- RGB lighting not working: Check the lighting control key combinations (FN + Del, FN + Spacebar) to ensure it's not turned off or set to a very dim setting.
- Keys not registering input: If specific keys are not working, try removing and re-inserting their switches, as they might not be seated correctly. Ensure the keycaps are properly installed.
- Intermittent connection issues: Ensure there are no strong interference sources (e.g., other wireless devices) near the keyboard or receiver. Try moving closer to your device.
Specifications
| Feature | Detail |
|---|---|
| Brand | SMAILWOLF |
| Model | MK95 |
| Type | Bluetooth Wireless Mechanical Keyboard |
| Operation Style | Mechanical |
| Keyboard Standard | 94 Keys |
| Language | Korean |
| Application | Desktop, Laptop |
| Interface Type | USB (for wired connection/charging) |
| Keycup Material | PBT plastic (Two-color injection molding) |
| Switches | Hot-swappable |
| Wrist Support | Yes |
| Battery | Included |
| Full Size Keyboard | No |
| Package Weight | 1.2 kg |
| Package Dimensions (L x W x H) | 47 cm x 20 cm x 5 cm |
User Tips
- Korean Layout: While the keyboard features a Korean layout, it is fully functional for users familiar with standard keyboard layouts. The keycap legends are in Korean.
- Customization: Take advantage of the hot-swappable switches to experiment with different switch types and find your preferred typing feel.
- Ergonomics: The ergonomic design with step keycap arrangement and R-angle design is intended for comfortable use. Adjust your posture for optimal comfort.
Warranty and Support
For any issues not covered in this manual or for further assistance, please contact the seller or manufacturer's customer support. Keep your purchase receipt for warranty claims.