1. Product Overview
The JIKONG JK BMS (Battery Management System) is an intelligent protection board designed for large-capacity series lithium battery packs. It integrates advanced features such as voltage acquisition, high-current active balancing, overcharge, over-discharge, overcurrent, over-temperature protection, coulomb metering, Bluetooth communication, and optional GPS remote functionality. This BMS is compatible with various battery chemistries, including lithium iron phosphate (LiFePO4), ternary lithium, and lithium titanate (LTO) batteries.
The protection board utilizes energy transfer active balancing technology with a continuous balancing current of up to 0.6A. This technology ensures battery consistency, extends battery range, and delays battery aging by efficiently transferring energy from higher-voltage cells to lower-voltage cells.
A dedicated mobile application (APP) is available for both Android and iOS operating systems. This APP connects to the BMS via Bluetooth, allowing users to monitor battery status, modify working parameters, and control charge/discharge switches. Its compact size, ease of operation, and comprehensive features make it suitable for a wide range of applications, including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage systems, base station backup power supplies, and solar power stations.
Key Features:
- Active Balancing: 0.6A continuous active balance current for optimal cell consistency.
- Wide Compatibility: Supports Li-ion, LiFePO4, and LTO battery types (8S-24S series).
- High Current Capacity: Up to 200A continuous charge/discharge current.
- Integrated Bluetooth: For remote monitoring and parameter adjustment via mobile APP.
- Comprehensive Protection: Overcharge, over-discharge, overcurrent, short circuit, over-temperature, and low-temperature protection.
- Accurate Monitoring: High-precision voltage acquisition (±3mV) and current acquisition.
- Communication Interfaces: Supports CAN, RS485 (optional), GPS (optional), and display screen interface (optional).
- Heating Function: Optional heating for low-temperature environments.
- Intelligent Sleep: Reduces self-consumption during standby.
2. Installation and Wiring
The JIKONG JK BMS BD6AxxS-10P/12P/15P/20P series protection board is designed for 7-24 series lithium battery packs. The specific wiring method varies depending on the number of cells in your battery pack. Always ensure proper connections to prevent damage to the BMS or battery.
2.1. Packing List
Before installation, verify that all components are present:
2.2. Product Appearance and Interfaces
The BMS features a robust design with various interfaces for communication and control. Familiarize yourself with the layout and connectors before proceeding with wiring.
The main connectors and their definitions are as follows:
| Connector | Pin Number | Pin Name | Definition |
|---|---|---|---|
| P1 (XH-15AW) Balance with Acquisition interface | 1 | B- | Total negative battery |
| 2 | B1 | The first battery positive | |
| ... | ... | ... | |
| 15 | B14 | The fourteenth battery positive | |
| P2 (XH-11AW) | 1 | B15 | The fifteenth battery positive |
| ... | ... | ... | |
| 10 | B24 | The twenty-fourth battery positive, Total battery positive | |
| 11 | B+ | Protection board power supply, connected to the battery | |
| P3 (XH-4AW) Temperature interface | 1 | T1A | First temperature sensor pin A |
| 2 | T1B | First temperature sensor pin B | |
| 3 | T2A | Second temperature sensor pin A | |
| 4 | T2B | Second temperature sensor pin B | |
| P4 (A1254WF-4A) Communication interface | 1 | RS485 B | RS485 signal negative terminal |
| 2 | RS485 A | RS485 signal positive terminal | |
| 3 | CAN H | CAN signal positive terminal | |
| 4 | CAN L | CAN signal negative terminal | |
| P5 (1.25T-4PWT) GPS interface | 1 | VGPS | Power output, voltage close to B+ |
| 2 | TX | UART_TX, 3.3V | |
| 3 | RX | UART_RX, 3.3V | |
| 4 | GND | Power/signal ground | |
| D1 (Heating wire) | 1 | HT- | Heater element negative electrode |
2.3. Wiring Diagram (24S Example)
Carefully follow the wiring diagram for your specific battery configuration. Ensure all balance wires are connected correctly to the corresponding cell positives, starting from B- (total negative) to B1, B2, and so on, up to B+ (total positive). The P- terminal connects to the external load or charger negative, and the B- terminal connects to the negative battery terminal.
2.4. Device Activation
Before powering on the protection board, double-check that the balance cables are properly connected and that the P- and B- terminals are correctly wired. Ensure the protection board is securely fixed to the battery pack. Incorrect connections can lead to abnormal operation or severe damage.
The BMS does not have a physical power-on switch. It is designed for charger activation mode: the charger voltage must be 2V higher than the battery voltage. Once the battery assembly is complete, connect the charger to activate the protection board.
Alternatively, the BMS supports activation via a key switch or a display screen (if equipped). Users with a display screen and button can activate the BMS by connecting the cable to the display interface and pressing the button.
3. Operation
3.1. Mobile APP Installation and Usage
The JIKONG BMS is managed via a mobile application. To install the APP, scan the QR code below. An Android device running Android 7 or higher is required.
The APP allows you to:
- Monitor real-time battery status (voltage, current, temperature, SOC).
- Modify BMS working parameters.
- Control charge and discharge switches.
- View historical data and logs.
3.2. Active Equalization
The BMS employs active equalization to balance cell voltages. Before using this function, set the basic battery parameters in the APP, including the number of cells, battery capacity, and trigger equalization differential pressure (default 0.01V). The default balance current is 0.6A. You can adjust the balance current based on your battery capacity, but it is recommended not to exceed 0.2C of the battery capacity. If not needed, the balancing function can be turned off in the APP's BMS control page.
3.3. GPS and Display Interface
The BMS has reserved ports for optional GPS modules, allowing for battery location tracking. It also supports an optional display screen for convenient viewing of battery information. Users can select these options based on their specific needs.
3.4. Heating Function (Optional)
For low-temperature environments, the BMS supports an optional heating function. This uses a resistance heater or heating film to warm the battery, preventing reduced charging/discharging performance due to low battery activity. The designed heating current is 10A. Users can switch this function on/off via the APP. It is recommended to install a normally closed temperature switch (45°C to 65°C) in the heating circuit as a secondary safety measure.
3.5. Battery Parallel Function (Optional)
The BMS supports an optional battery parallel function for energy storage applications. This feature requires synchronous use with a parallel module and disabling the "charging current limiting" function in the APP.
3.6. ACC Detection Function (Optional)
The ACC detection function can be used to enable discharge. There are two methods: applying a voltage between ACC+ and ACC- (12V-70V), or directly short-circuiting ACC+ and ACC-. Additionally, dedicated C_detect+ and C_detect- interfaces are provided for charger detection, enabling charging when a 12V voltage signal from the charger is present.
3.7. Communication Function (Optional)
The BMS supports optional CAN and RS485 communication functions. Users can select these based on their requirements and configure the address and communication protocol via the APP. Refer to the JIKONG Protection Board communication protocol document for detailed information.
4. Protection Features and Safe Operating Practices
The JIKONG BMS is equipped with multiple protection mechanisms to ensure the safety and longevity of your battery pack. Proper configuration and understanding of these features are crucial for optimal performance and safety.
4.1. Overcharge Protection and Recovery
The BMS includes standard charge overvoltage protection. Users can set individual cell overcharge protection voltage and recovery voltage in the APP. If any cell exceeds the set overvoltage, the BMS will stop charging. Charging resumes when all cell voltages drop below the recovery voltage, preventing cell damage from overcharging.
4.2. Over-discharge Protection and Recovery
Standard discharge undervoltage protection is provided. Users can set the undervoltage protection voltage, recovery voltage, and automatic shutdown voltage in the APP. If any cell drops below the protection voltage during discharge, the BMS will stop discharging. Discharge resumes when all cell voltages rise above the recovery voltage. If any cell drops below the automatic shutdown voltage, the BMS will shut down to protect the battery.
4.3. Overcurrent Protection and Recovery (Charge/Discharge)
The BMS features standard charge and discharge overcurrent protection. Users can set continuous charge/discharge current, overcurrent delay, and recovery time in the APP. If the current exceeds the set limit for the specified delay, the BMS will stop charging/discharging. Operation resumes after the set recovery time.
4.4. Over-temperature and Low-temperature Protection and Recovery
Standard charge/discharge over-temperature and low-temperature protection are included. Users can set protection and recovery temperatures in the APP. If the battery temperature exceeds the over-temperature limit or falls below the low-temperature limit, the BMS will stop charging/discharging. Operation resumes when the temperature returns to within the safe operating range.
4.5. Short Circuit Protection and Recovery
The BMS provides standard short circuit protection. While the trigger current is fixed, users can adjust the short circuit protection delay (in microseconds) and recovery time (in seconds) via the APP. If a short circuit occurs, the BMS will immediately cut off power and attempt to recover after the set time. Adjusting the delay can help prevent false triggers from high inrush currents during initial connection of loads or chargers.
4.6. Emergency Switch
In case of critical issues like over-temperature, over-discharge, overcharge, or cell string drops, activating the emergency switch in the APP's BMS control page will force the BMS to enable charge and discharge for 30 minutes. This provides a temporary operational window, even if a single cell voltage reaches the automatic shutdown level, to prevent critical failures in situations like being stranded on the road.
4.7. Intelligent Sleep
The intelligent sleep function is standard and can be enabled or disabled via the APP. Its purpose is to reduce the BMS's self-consumption when the battery pack is in standby (charging/discharging current less than 1A for 26 consecutive hours). The BMS can be reactivated by pressing a button or connecting a charger.
5. Troubleshooting
If your JIKONG BMS is not functioning as expected, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| BMS not activating / No power | Incorrect wiring, battery voltage too low, or not activated by charger. | Verify all wiring (P-, B-, balance wires). Ensure charger voltage is 2V higher than battery voltage for activation. If optional, use key switch or display activation. |
| Charging stops unexpectedly | Overcharge protection, charge overcurrent protection, charge over-temperature protection, charge low-temperature protection triggered. | Check cell voltages, charging current, and battery temperature via the APP. Allow conditions to return to normal or adjust parameters if appropriate. |
| Discharge stops unexpectedly | Over-discharge protection, discharge overcurrent protection, discharge over-temperature protection, short circuit protection triggered. | Check cell voltages, discharging current, and battery temperature via the APP. Allow conditions to return to normal or adjust parameters if appropriate. Check for short circuits in the load. |
| Cells are unbalanced | Active balancing not enabled or parameters incorrectly set. | Ensure active balancing is enabled in the APP. Verify cell count and balancing parameters are correctly configured. |
| BMS not communicating via Bluetooth | Bluetooth module off, APP not connected, or interference. | Ensure Bluetooth is enabled on your mobile device. Restart the APP and BMS. Check for nearby interference. |
| BMS enters sleep mode unexpectedly | Intelligent sleep function enabled and battery in standby for extended period. | Activate the BMS by connecting a charger or pressing the button (if applicable). Disable intelligent sleep in the APP if not desired. |
6. Specifications
The following tables detail the general and model-specific parameters for the JIKONG JK BMS.
6.1. General Specifications
| Parameter | Value | Unit |
|---|---|---|
| Supply Voltage | 20-100 | V |
| Operating Power Consumption | <800 | mW |
| Operating Temperature | -30 to 70 | °C |
| Maximum Number of Collection Strings | 24 | String |
| Maximum Balancing Current | 0.6 | A |
| Maximum Internal Loop Resistance | 0.35 - 0.69 | mΩ |
| Finished Weight | 567 | g |
6.2. Model-Specific Parameters (BD6A20S20P)
| Parameter | Value | Unit |
|---|---|---|
| Maximum Charging Current | 200 | A |
| Maximum Discharge Current | 200 | A |
| Maximum Instantaneous Current | 400 | A |
6.3. Dimensions
The physical dimensions of the JIKONG JK BMS BD6AxxS-10P/12P/15P/20P series protection board are 162mm × 102mm × 20.4mm.
7. User Tips
- Initial Setup: Always connect the balance wires before connecting the main power cables (P- and B-). This ensures proper cell voltage detection from the start.
- APP Monitoring: Regularly check the battery status via the mobile APP, especially during the first few charge/discharge cycles, to ensure all cells are balancing correctly and no protection events are triggered unexpectedly.
- Parameter Adjustment: When adjusting parameters in the APP, make small, incremental changes and observe the system's behavior. Incorrect settings can lead to protection triggers or suboptimal performance.
- Temperature Management: If operating in extreme cold, consider utilizing the optional heating function to maintain optimal battery performance and prevent low-temperature protection from activating.
- Firmware Updates: Check the manufacturer's website or APP for any available firmware updates, which may include performance improvements or bug fixes.
8. Frequently Asked Questions (FAQ)
- Q: What battery types are supported by this BMS?
- A: The JIKONG JK BMS supports Li-ion, LiFePO4, and LTO (Lithium Titanate) battery types.
- Q: How do I activate the BMS for the first time?
- A: The BMS is activated by connecting a charger with a voltage at least 2V higher than the battery pack voltage. If equipped, it can also be activated via a key switch or display screen.
- Q: What is active balancing and how does it work?
- A: Active balancing is a technology that transfers energy from higher-voltage cells to lower-voltage cells within the battery pack, ensuring all cells maintain a consistent voltage. This improves battery life and performance.
- Q: Can I monitor the BMS from my phone?
- A: Yes, the BMS has built-in Bluetooth connectivity and can be monitored and configured using a dedicated mobile APP available for Android and iOS devices.
- Q: What should I do if the BMS triggers a protection event?
- A: Check the APP for the specific protection triggered (e.g., overvoltage, overcurrent, over-temperature). Address the underlying cause (e.g., reduce load, allow cooling) and the BMS will typically recover automatically once conditions return to normal. In emergencies, the emergency switch can provide temporary operation.
9. Warranty and Support
This JIKONG BMS product is manufactured by Chengdu Jikong Technology Co.LTD. For specific warranty terms, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase records for warranty claims.
For further documentation, including detailed parameter settings and communication protocols, please refer to the official JIKONG resources or contact their support.
A user manual in PDF format is available for download: User manual (PDF)