MaXpeedingrods Coilover Struts User Manual

1. Product Overview

This manual provides essential information for the installation, operation, and maintenance of your MaXpeedingrods Shock Absorber Coilover Struts. These high-performance suspension components are designed to enhance the handling and ride quality of your Ford Focus Mk2 2.5 ST Hatchback (2004-2011).

The kit includes:

• Front Coilover Struts (assembled with springs, bump stops, and locking rings)
• Rear Shock Absorbers
• Rear Springs
• Adjustable Locking Rings
• Spanner Wrenches for adjustment
• Solid rubber bump stops

Figure 1: Assembled view of the MaXpeedingrods Coilover Struts kit.

Figure 2: Disassembled view showing individual components of the coilover struts and rear shocks.

2. Setup and Installation

Important: Professional installation is highly recommended for suspension components. Incorrect installation can lead to vehicle damage, poor performance, or safety hazards. Refer to the dedicated 'INSTALLATION INSTRUCTIONS' booklet included with your product for detailed, step-by-step guidance specific to this coilover kit.

Figure 3: Product packaging showing the included 'INSTALLATION INSTRUCTIONS' booklet.

General Installation Steps (Consult detailed manual for specifics):

1. Safely lift and support the vehicle.
2. Remove the original suspension components (struts, shocks, springs).
3. Install the new MaXpeedingrods coilover struts and rear shocks/springs, ensuring all mounting points are correctly aligned and secured.
4. Adjust the ride height using the provided spanner wrenches and locking rings.
5. Torque all fasteners to manufacturer specifications.
6. Perform a wheel alignment after installation to ensure proper vehicle handling and tire wear.

Key Components:

• Solid Rubber Bump Stops: Designed to prevent harsh bottoming out and protect the shock absorber from damage.

Figure 4: Detail of solid rubber bump stops.
• Anti-Rust and Lightweight Locking Rings: Used for precise ride height adjustment.


Figure 5: Detail of locking rings.

• Anti-Rust and Heavy-Duty Lower Mount: Ensures secure and durable attachment to the vehicle.


Figure 6: Detail of the lower mount.

3. Operating and Adjustment

Your MaXpeedingrods coilovers allow for adjustable ride height, enabling you to customize your vehicle's stance and handling characteristics.

Ride Height Adjustment:

1. Safely lift the vehicle to relieve pressure from the suspension.
2. Loosen the locking rings on the coilover body using the provided spanner wrenches.
3. Rotate the lower spring perch to raise or lower the vehicle. Turn clockwise to lower, counter-clockwise to raise.
4. Once the desired height is achieved, tighten the locking rings securely to prevent movement.
5. Repeat for all four corners, ensuring even height distribution.
6. After adjustment, lower the vehicle and bounce each corner to settle the suspension. Re-check ride height.
7. It is crucial to perform a wheel alignment after any significant ride height adjustment.

Note: Excessive lowering can negatively impact suspension travel, handling, and tire wear. Always ensure adequate clearance for all suspension components and tires.

4. Maintenance

Regular maintenance will ensure the longevity and optimal performance of your coilover struts.

Recommended Maintenance Schedule:

• Every 6 months or 10,000 km (whichever comes first):
  • Inspect for any signs of fluid leaks from the shock absorbers.
  • Check for damage to dust boots, bump stops, and springs.
  • Verify that all mounting bolts and locking rings are securely tightened.
  • Clean the coilover bodies and threads to prevent corrosion and ensure smooth adjustment.
• Annually:
  • Thoroughly inspect for wear on bushings and bearings.
  • Re-torque all suspension fasteners to factory specifications.
  • Consider a professional suspension inspection.

Keep the coilover threads clean and lubricated with a suitable anti-seize compound to facilitate future adjustments.

5. Troubleshooting

If you experience any issues with your MaXpeedingrods coilover struts, consult the following common troubleshooting tips:

If the issue persists after attempting these solutions, please contact MaXpeedingrods customer support.

6. Specifications

7. Warranty and Support

MaXpeedingrods stands behind the quality of its products. For specific warranty details, please refer to the documentation provided with your purchase or contact customer support.

Returns:

Free returns are available within 90 days of purchase. Please consult the seller's return policy for full terms and conditions.

Customer Support:

For technical assistance, warranty claims, or any other inquiries, please contact MaXpeedingrods customer support through the platform where the product was purchased. Ensure you have your order details and product information readily available.

8. User Tips

• Professional Installation: Always consider professional installation for suspension components to ensure safety and optimal performance.
• Post-Installation Alignment: A wheel alignment is critical after installing new coilovers or adjusting ride height to prevent premature tire wear and maintain proper handling.
• Gradual Adjustment: When adjusting ride height, make small, even adjustments to all four corners and test the vehicle's handling before making further changes.
• Regular Inspection: Periodically check for loose bolts, leaks, or damage, especially after driving on rough roads.