1. Introduction
The Transformer Y17 Pro is a wireless Bluetooth speaker designed with a unique Sci-Fi Ball Desktop Card Speaker aesthetic, inspired by the Transformers universe. It features TWS stereo subwoofer capabilities, a detachable mechanical warrior design, and dynamic sound and light rhythm modes. This manual provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance.
Image: The Transformer Y17 Pro speaker in its iconic yellow color, highlighting its modern design and audio capabilities.
2. Setup Guide
2.1 Unpacking and Components
Carefully remove all components from the packaging. Ensure you have the following:
- Transformer Y17 Pro Speaker (Bumblebee Yellow or Optimus Primal Gray)
- Detachable Ball-Foot Modules (legs)
- Type-C Charging Cable
- User Manual (this document)
Image: Contents of the speaker package, including the speaker, detachable feet, and charging cable.
2.2 Attaching the Detachable Ball-Foot Modules
The speaker features detachable ball-foot modules for its mechanical warrior design. To attach them:
- Align the connectors on the ball-foot modules with the snap-on quick-release ports on the speaker body.
- Gently push until you hear a click, indicating they are securely attached.
- To detach, pull the modules away from the speaker body.
Image: Visual guide for attaching and detaching the speaker's ball-foot modules.
2.3 Initial Charge
Before first use, fully charge the speaker using the provided Type-C charging cable. Connect the cable to the Type-C port on the speaker and a compatible USB power source (5-20V DC).
3. Operating Instructions
3.1 Button Functions
The speaker features intuitive silicone-textured buttons for comfortable and responsive control. Refer to the diagram below for button layout and functions:
Image: Detailed overview of the speaker's button controls.
| Button | Action | Function |
|---|---|---|
| Power Button | Double-click | Switch lighting effects / Reject call |
| Power Button | Single click | Play/Pause/Answer/End call |
| Power Button | Long press for 3 seconds | Power on / off |
| Power Button | Long press for 8 seconds | Reset |
| Multifunctional Button (M) | Press and hold for 3 seconds | Disconnect Bluetooth |
| Multifunctional Button (M) | Press once briefly | Switch between Bluetooth/TF modes |
| Multifunctional Button (M) | Double click | Enter TWS function; double click again to disconnect TWS function |
| Plus Key (+) | Press once briefly | Increase volume |
| Plus Key (+) | Press and hold for 2 seconds | Next track |
| Subtract Key (-) | Press once briefly | Decrease volume |
| Subtract Key (-) | Press and hold for 2 seconds | Previous track |
3.2 Bluetooth Pairing
- Ensure the speaker is powered on (long press power button for 3 seconds).
- The speaker will automatically enter Bluetooth pairing mode, indicated by a flashing light.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "TF-Y17 Pro" from the list to connect.
- Once connected, the speaker will emit a confirmation sound, and the light indicator will stabilize.
3.3 TWS Networking Mode (True Wireless Stereo)
To achieve a 360° cinema-level 3D surround sound effect, you can connect two TF-Y17 Pro speakers in TWS mode:
- Ensure both speakers are powered on and not connected to any other Bluetooth device.
- On one speaker, double-click the Multifunctional (M) button to enter TWS pairing mode.
- The speakers will automatically search for and connect to each other.
- Once connected, they will function as a stereo pair.
- To disconnect TWS mode, double-click the Multifunctional (M) button on either speaker again.
Image: Two TF-Y17 Pro speakers operating in TWS networking mode for enhanced audio.
3.4 TF Card Playback
The speaker supports direct playback from a TF (MicroSD) card:
- Insert a TF card with MP3 audio files into the TF card slot on the speaker.
- Press the Multifunctional (M) button briefly to switch to TF card mode.
- The speaker will automatically begin playing music from the card.
- Use the Plus (+) and Subtract (-) keys to control volume and track selection.
3.5 Lighting Effects
The TF-Y17 Pro features three main lighting effects and six RGB colors:
- Theme Light Effects: Single-Color Constant On, Breathing Gradient, Music Sync (Rhythm Mode).
- RGB Colors: Cyan, Purple, Red, Blue, Green, Orange.
Double-click the Power button to cycle through the available lighting effects.
Image: Visual representation of the speaker's sound and light rhythm features.
4. Maintenance
4.1 Cleaning
To clean your speaker, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the surface or internal components. Avoid exposing the speaker to excessive dust or moisture.
4.2 Charging
Charge the speaker using the provided Type-C cable. A full charge takes approximately 3 hours. The 2000mAh high-performance lithium battery provides approximately 3 hours of music playback time.
Image: Battery endurance details for the TF-Y17 Pro speaker.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery. | Charge the speaker for at least 30 minutes. |
| Cannot connect via Bluetooth. | Speaker not in pairing mode; device Bluetooth off; too far from speaker. | Ensure speaker is on and in pairing mode. Turn device Bluetooth on/off. Move device closer (within 10m). Press and hold 'M' button for 3 seconds to disconnect previous device. |
| No sound. | Volume too low; paused playback; incorrect mode. | Increase volume on speaker and device. Press power button to play/pause. Press 'M' button to switch modes (Bluetooth/TF). |
| TWS pairing fails. | Speakers already connected to other devices; too far apart. | Ensure both speakers are disconnected from other devices. Place speakers close to each other. Double-click 'M' button on one speaker to initiate TWS pairing. |
| Speaker unresponsive. | System error. | Perform a reset by long pressing the Power button for 8 seconds. |
6. Specifications
Image: Detailed product parameters and dimensions.
| Feature | Specification |
|---|---|
| Product Type | Bluetooth speaker |
| Product Model | TF-Y17 Pro |
| Brand Name | SwYiSm (Licensed Transformers Product) |
| Effective Bluetooth Distance | 10m |
| Bluetooth Version | Bluetooth v5.4 |
| Charging Interface | Type-C |
| Rated Power | 8W |
| Product Size (L*W*H) | 153.07mm * 136.92mm * 161.33mm |
| Sensitivity | -83dB ±3dB |
| Built-in Battery | Lithium battery 3.7V/2000mAh |
| Charging Time | About 3 hours |
| Weight | 542g |
| Input/Output | TF (MicroSD) |
| Number of Devices Connectable Simultaneously | 2 (via TWS) |
| Sound Mode | Stereo Sound Mode |
| Audio Crossover | Full-Range |
| Number of Loudspeaker Enclosures | 1 |
| Power Source | DC |
| Channels | 2 (2.0) |
| Features | Phone Function, Play Video |
| Speaker Type | Bookshelf |
| Cabinet Material | Plastic |
| Material (Internal/Components) | STEEL |
| Origin | Mainland China |
| Certification | CE |
7. User Tips
- For the best audio experience, especially for gaming or movies, consider utilizing the TWS Networking Mode with two TF-Y17 Pro speakers.
- Experiment with the different lighting effects to match your mood or music genre. The Music Sync mode is particularly engaging.
- Keep your speaker charged to avoid interruptions during use. The 2000mAh battery provides decent playtime, but regular charging is recommended for extended sessions.
- The detachable ball-foot modules allow for flexible placement and can be removed for a more compact form factor if desired.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your proof of purchase for any warranty claims.