1. Introduction
This manual provides essential information for the safe and effective use of your LUMDEER HT-16 Road Bicycle Turn Signal Helmet. Please read it thoroughly before using the product.
This product complies with the essential health and safety requirements set out in Regulation (EU) 2016/425 Personal Protective Equipment and meets the requirements of the Harmonized Standards EN 1078:2012+A1:2012; CPSC 16 CFR Part 1203.
2. Safety Instructions
- The helmet can only provide protection if it fits well. Ensure you choose a size that feels secure and comfortable on your head.
- A helmet cannot always protect against injury. Even in low-speed accidents, serious injury or death can occur.
- A helmet subjected to a severe impact should be discarded and destroyed immediately, as its protective function may be compromised, even if damage is not visible.
- Do not modify or remove any of the original component parts of the helmet.
- The helmet should not be adapted for the purpose of fitting accessories in a way not recommended by the manufacturer.
- WARNING: This helmet should not be used by children while climbing or doing other activities where there is a risk of strangulation/hanging if the child gets strapped with the helmet.
- WARNING: No helmet can prevent all head injuries. For best protection, the helmet must be fitted and attached properly to the head in accordance with the fitting instructions.
3. What's in the Box
The LUMDEER HT-16 helmet package includes the following items:
- HT-16 Bike Helmet x1
- Black Visor x1
- Remote Controller x1
- USB Charging Cable x1
- User Manual x1 (This document)
- Helmet bag x1

4. Setup
4.1. Fitting the Helmet
Proper helmet fit is crucial for safety. Follow these steps to ensure a correct fit:
- Positioning: Place the helmet on your head so that it protects your forehead and is not pushed too far over the back of your head.
- Adjustment System: Use the knob-type adjustment system at the back of the helmet to precisely adapt it to your head circumference. Turn the knob until the helmet feels snug and secure.
- Strap Adjustment: Adjust the straps so that they do not cover your ears. The buckle should be positioned away from your jawbone.
- Buckle: Fasten the buckle and adjust the straps to be both comfortable and firm.
- Check Fit: The helmet should not move significantly forward or backward when the straps are closed. If it does, readjust or consider a different size.

4.2. Attaching Magnetic Goggles and Visor
The helmet is equipped with a detachable brim and magnetic goggles. These can be easily attached or removed to suit different riding conditions and environments.

5. Operating Instructions
5.1. Charging the Integrated Lights
The helmet features an integrated intelligent lighting system. To charge the lights:
- Locate the USB charging port on the helmet.
- Connect the provided USB charging cable to the helmet and a suitable USB power source.
- Allow the helmet to charge until the indicator light (if present) shows a full charge.
5.2. Using the Intelligent Lighting System
The helmet integrates a headlight, taillight, and turn signals for enhanced visibility and safety. These are controlled via a handlebar-mounted remote control.

Headlight Modes:
- Always on white light mode: Provides continuous front illumination.
- Red light flashing mode: Enhances visibility with a flashing red light.
Taillight Modes:
- Breathing pattern: Gentle pulsating light.
- Flashing pattern: Regular flashing for increased attention.
- Horse racing mode: Dynamic sequential lighting.
- Always on mode: Continuous rear illumination.
The exclusive remote-controlled brake taillight automatically brightens during deceleration, significantly improving riding safety.
Turn Signals:
Use the handlebar remote control to activate left and right turn signals, clearly indicating your turning intentions to others.
6. Maintenance
6.1. Cleaning
To maintain your helmet's condition and effectiveness:
- Clean your helmet only with lukewarm water, mild soap, and a soft cloth.
- First, remove the comfort padding.
- Gently wipe the interior and exterior surfaces of the helmet with the damp cloth.
- The comfort padding can be hand washed using lukewarm water and mild soap. After washing, allow the padding to air dry completely before reinserting.
- It is recommended to clean the helmet once every 1-2 months, with a maximum cleaning frequency of no more than 50 times throughout its lifespan.
- Caution: Do not clean with solvents, bleaches, or strong detergents, as they can damage the helmet, sometimes invisibly, impairing its protective effectiveness.
6.2. Storage
- Allow your helmet to air dry completely after each use.
- Store your helmet in a cool, dry place.
- High temperatures, starting at 60°C, can seriously damage the helmet. Uneven surfaces and blistering are signs of such damage.
- Do not store the helmet behind glass, such as in a car, or near heating sources.
7. Troubleshooting
- Improper Fit: If you are unable to adjust the size of the helmet so that it can only be moved slightly forward or backward with the straps closed, do not use it! Exchange the helmet for a smaller or different model.
- Damage: A helmet subjected to a severe impact or deep scratch must be discarded and destroyed, as it loses its protective function. Protection may not be adequate in future impacts as damage can be invisible.
- Modifications: Modifications to the helmet, such as applying paints or stickers, removing internal labels (including warning labels and identification codes), or using aggressive cleaning agents, chemicals, or solvents, will impair the helmet's protective effectiveness.
- Obsolescence: A helmet must be replaced if it no longer fits properly or, at the latest, 6 years after the date of manufacture, even if no damage is visible. Your helmet must be regularly inspected for any visible defects.
8. Specifications
| Attribute | Value |
|---|---|
| Product Name | Smart Road Cycling Helmet |
| Brand | LUMDEER |
| Model Number | HT-16 |
| Material | PC shell + EPS inner core |
| Weight (Size L) | Approx. 400g |
| Head Size | L (57-62cm) |
| Air Vents | 10 |
| Certification | CE |
| Type | Light Helmet |
| Characteristic | Rechargeable front and rear taillights, turn signals, Magnetic lens |
| Usage | Racing/road/mountain/pulley (Suitable for Bicycles, scooters, roller skates, balance bikes) |


9. User Tips
- Always ensure the helmet is securely fastened and properly adjusted before every ride.
- Regularly check the battery level of the integrated lights, especially before night rides, to ensure optimal visibility.
- Utilize the turn signals consistently to communicate your intentions to other road users, enhancing overall safety.
- Keep the magnetic goggles and visor clean for clear vision, especially in varying light conditions.
10. Further Information and Support
For additional detailed information, including comprehensive safety guidelines and specific product certifications, please refer to the official user manual PDF: