Toolour 858D

Contents

Toolour 858D Hot Air Rework Station Instruction Manual

Model: 858D

Introduction

The Toolour 858D Hot Air Rework Station is a powerful and versatile tool designed for SMD welding, desoldering, and various electronic repair tasks. It features precise temperature and air speed control, an LED digital display, and intelligent functions to enhance efficiency and safety. This manual provides essential information for the safe and effective operation, setup, and maintenance of your rework station.

Safety Instructions

Please read and adhere to the following safety guidelines to prevent injury and damage to the equipment:

  • Read the operating manual completely before use, paying particular attention to all safety instructions.
  • Ensure all recommended safety gear, such as goggles and work gloves, is assembled and worn.
  • Wear close-fitting long-sleeve shirts and pants to protect your limbs from heat.
  • Do not use small diameter nozzles with the brushless air model hot air gun; use the equipped nozzles for dismantling and soldering.
  • Always turn off the power and allow the steel tube and nozzles to cool down completely before attempting to switch nozzles.
  • Plug in the hot air gun handle connector before starting the machine.
  • Initial use may produce smoke and smell; this is normal and will dissipate.
  • The equipment generates heat during use. Ensure proper heat dissipation and ventilation. Keep the machine away from high temperatures, humidity, flammable materials, and explosives.
  • Always place the unit in a dry and well-ventilated area. Do not block cooling holes.
  • Turn off the machine when not in use.
  • Do not aim the hot air gun at yourself or others. Keep it away from your body and out of reach of children.
  • Do not alter the machine without certified personnel.

Product Overview and Components

The Toolour 858D Hot Air Rework Station includes the main control unit, a hot air gun, a gun holder, three hot air nozzles, and a power cable. Below is a diagram illustrating the main components and controls.

Diagram of Toolour 858D Hot Air Rework Station controls
Figure 1: Main components and controls of the 858D Rework Station. Labels include Steel Case, Air Speed, Temperature Adjustable, Air Speed Adjustable, On/Off switch, Hot Air Gun Power (Detachable connector), Hot Air Gun, and Gun Holder.
All components included in the Toolour 858D package
Figure 2: Package contents including the 858D station, hot air gun, three nozzles, gun holder, and power cable.

Setup Instructions

Installing Air Nozzles:

  1. Ensure the rework station is powered off and the hot air gun's steel tube has completely cooled down.
  2. Select the desired nozzle (5mm, 8mm, or 10mm). Slot the nozzle onto the steel tube and press it firmly to the bottom.
  3. Tighten the retaining screw to secure the nozzle. Avoid overtightening to prevent deformation.

Connecting the Hot Air Gun:

  • Connect the hot air gun's detachable connector to the "SOLDER" port on the main unit.
  • Place the hot air gun securely in its holder when not in use.

Power Connection:

  • Connect the provided EU standard power cable to the power input on the back of the unit.
  • Plug the power cable into a compatible 220V power outlet.
Back panel of the 858D station showing power input and fuse
Figure 3: Rear view of the 858D station, indicating 220V input, 700W power, and 5*20mm/5A fuse.

Operating Instructions

Powering On and Initial Use:

  1. Ensure all connections are secure and the hot air gun is placed in its holder.
  2. Flip the "POWER" switch to the ON position. The LED display will illuminate.
  3. Upon first use, a slight smoke and smell may be observed; this is normal and will dissipate.

Adjusting Temperature:

  • Use the white buttons next to the LED display to adjust the temperature. Press the left button to decrease and the right button to increase the temperature.
  • The LED display shows the current temperature in Celsius or Fahrenheit (depending on the unit's setting). The adjustable temperature range is 100~500°C (212~932°F).
  • The PID temperature control technology ensures rapid heating (within 3-5 seconds) and maintains temperature stability of ±1°C (33.8°F).

Adjusting Air Speed:

  • Rotate the "AIR" adjustment knob (labeled 1-8) to control the air speed.
  • The brushless turbine fan provides a maximum air volume of 120L/min (31.7 GPM) with gentle, even airflow.

Intelligent Temperature Memory and Standby:

  • The station features intelligent temperature memory. When you return to a working mode, turn on the station, and pick up the hot air gun, it will recall the last used temperature setting.
  • The hot air gun has a built-in angle sensor. When the air outlet is facing upwards (placed in the holder), it automatically enters standby mode. When picked up and facing downwards, it rapidly reheats to the set temperature.
Toolour 858D Hot Air Rework Station in operation
Figure 4: The 858D station and hot air gun in a typical working environment.

Maintenance

  • Cleaning: The black steel housing and smooth surfaces can be easily cleaned with a soft cloth.
  • Nozzle and Heating Element: Periodically clean the nozzles and heating element for optimal performance. Exercise extreme caution when cleaning them, especially if the unit has been recently used and is still hot.
  • Heat Dissipation: Ensure the heat-sink holes on the machine are not blocked by foreign objects to maintain proper heat dissipation and prevent motor burnout.
  • Storage: Store the machine in a dry and well-ventilated area, away from high temperatures, humidity, flammable, and explosive materials.

Troubleshooting

If you encounter any issues with your Toolour 858D Hot Air Rework Station, please review the setup and operating instructions carefully. Ensure all connections are secure and the power supply is stable. For persistent problems, please contact customer support for assistance.

Specifications

FeatureSpecification
Model858D
ColorBlack
MaterialSteel
StyleModern
ShapeRectangular
Power SourceCorded Electric
PlugEU Standard
Temperature DisplayLED Microcomputer Digital Display
Fan TypeBrushless Turbine Fan with Gentle Wind
Heat ElementPTC Ceramic Heating Core
Input220V
Power700W
Noise<45db
Tip to Ground Resistance<2Ω
Tip to Ground Voltage<2mV
Fuse5*20mm/0.2*0.78inch 5A
Max. Air Volume120L/min, 31.7GPM
Temperature Stability±1°C/33.8°F
Adjustable Temperature Range100~500°C/212~932°F
Nozzle Diameter5mm/0.2inch, 8mm/0.3inch, 10mm/0.4inch
Hot Air Gun Length (Line Included)1.2m/3.9ft
Multi-Station Size15.3*9.6*13.8cm/6*3.78*5.4inch
Net Weight1.6kg/3.5 lbs
Dimensions of the 858D Hot Air Rework Station
Figure 5: Dimensions of the 858D Multi-Station: 15.3cm (length), 9.6cm (width), 13.8cm (height).

User Tips

  • For precise temperature calibration, use a professional thermometer with an external thermocouple.
  • Remember the hot air gun's handle is gravity-sensing: it works when pointed downward and enters standby when pointed upward (in the holder).
  • When you pick up the hot air gun, it will heat immediately to the last set temperature.

Warranty and Support

For warranty information or technical support, please contact the seller or manufacturer directly. Keep your purchase records for any claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.