1. Introduction
Thank you for choosing the TELESIN Magnetic Smartphone Flashlight. This portable and powerful lighting solution is designed to enhance your smartphone photography with its high brightness output, versatile lighting modes, and convenient magnetic attachment. Please read this manual carefully to understand the product's features and ensure proper usage.
2. What's in the Box
Upon unboxing, please ensure all the following items are present:
- TELESIN Magnetic Smartphone Flashlight
- User Manual
- USB Type-C Charging Cable
- Magnetic Ring (for non-MagSafe compatible phones)
3. Specifications
| Feature | Detail |
|---|---|
| Size | 2.6×2.3×0.7in (66×58.5×19mm) |
| Weight | 60g |
| Battery | 500mAh 3.7V Type-C |
| Charge Time | ≤1 hour (no operation while charging) |
| Power | Flash 15W | Fill Light 3W |
| Color Temperature | Flash 6500K | Fill Light 2500K/4500K/6500K |
| Runtime | Fill light only ≥45min | Flash only ≥1000 times |
| Illuminance | Flash >5000lux @0.5m | Fill Light >250lux @0.5m |
| Bluetooth Range | 10m |
| Compatible Brand | Mobile Phone Brands (iPhone, XIAOMI, HUAWEI, SAMSUNG) |

4. Setup
4.1 Charging the Device
Before first use, fully charge the flashlight. Connect the provided USB Type-C charging cable to the charging port on the device and a suitable USB power source.
- When the battery is low, the indicator light will flash red.
- During charging, the indicator light will display green.
- A full charge takes approximately 1 hour.

4.2 Attaching the Magnetic Ring (for non-MagSafe phones)
If your smartphone is not MagSafe compatible, use the included magnetic ring for secure attachment:
- Clean the back surface of your phone or phone case thoroughly.
- Peel off the protective film from the adhesive side of the magnetic ring.
- Carefully align the magnetic ring to the center of your phone's back, ensuring it does not obstruct the camera lenses.
- Press firmly to secure the ring in place.

4.3 Attaching the Flashlight to Your Phone
Once the magnetic ring is applied (or if your phone is MagSafe compatible), simply place the TELESIN Magnetic Flashlight onto the magnetic area on the back of your phone. The strong magnetic base will hold it securely.

4.4 Bluetooth Pairing
To enable remote control and app synchronization, pair the flashlight with your smartphone via Bluetooth:
- Turn on the TELESIN Magnetic Flashlight.
- On your smartphone, go to Settings and enable Bluetooth.
- Search for available devices and select "TELESIN_LT03".
- The Bluetooth indicator light on the flashlight will flash when not connected and remain steady when successfully paired.

4.5 App Installation (Reef Color App)
For advanced features like one-touch flash sync and camera sound simulation, download the "Reef Color" app from your smartphone's App Store.
5. Operating Instructions
5.1 Button Functions
The flashlight features several buttons for easy control:
- Mode Switch Button: Short press to switch between fill light mode (default on power-up) and flash mode.
- Brightness Adjustment Knob: Rotate left to increase brightness, rotate right to decrease brightness. This applies to both flash and fill light modes.
- Power On/Off & Color Temperature Adjustment Button:
- Long press for 2 seconds to power off the device.
- In fill light mode, short press to cycle through three color temperatures: cool light, neutral light, and warm light.
- Bluetooth Photo Button: Used for remote camera control within the app.

5.2 Adjusting Brightness
Rotate the brightness adjustment knob to fine-tune the light output from 10% to 100% in both flash and fill light modes.

5.3 Adjusting Color Temperature (Fill Light Mode)
In fill light mode, short press the Power On/Off & Color Temperature Adjustment Button to switch between 2500K (warm), 4500K (neutral), and 6500K (cool) color temperatures to match your environment or desired mood.

5.4 Using with the Reef Color App
After pairing via Bluetooth and opening the "Reef Color" app:
- One-Touch Flash Sync: The app allows the flashlight to be triggered simultaneously when you take a photo, ensuring perfect synchronization.
- Camera Sound Simulation: The app offers three camera sound simulations (C90D, FNC, Hassx) for an enhanced photography experience.

6. Maintenance
- Keep the device clean by wiping it with a soft, dry cloth.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- Do not attempt to disassemble or repair the device yourself, as this will void the warranty.
- Store the flashlight in a cool, dry place when not in use.
7. Troubleshooting
- Device not turning on: Ensure the device is fully charged.
- Bluetooth not connecting: Make sure Bluetooth is enabled on your phone and the flashlight is within range. Try forgetting the device in your phone's Bluetooth settings and re-pairing.
- Flash not syncing with app: Verify the flashlight is connected via Bluetooth and selected within the "Reef Color" app.
- Light output is weak: Check battery level and recharge if necessary.
Resetting Bluetooth Pairing
If you experience persistent Bluetooth connection issues, you can clear the pairing record:
- Simultaneously long press the Bluetooth Photo Button and the Mode Switch Button for 2 seconds. This will clear the existing Bluetooth pairing record and allow you to reconnect.
8. User Tips
- For optimal lighting, experiment with the 180° adjustable head to direct light precisely where needed.
- Utilize the different color temperatures in fill light mode to achieve various moods and effects in your selfies and close-up shots.
- Keep the flashlight charged, especially before extended shooting sessions, to ensure you don't miss any moments.
- When using the magnetic ring, ensure it is securely attached and centered for the best stability.
9. Warranty & Support
TELESIN products are manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official TELESIN website.