1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your new LH-100 Dashboard, designed as a replacement LCD speedometer control panel display for the Mercane MX60 Smart Electric Scooter. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Safety Information
Please observe the following safety precautions:
- Always ensure the electric scooter is powered off and disconnected from any power source before attempting installation or maintenance.
- Verify model compatibility (Mercane MX60 with 6-Pin connector) before installation to prevent damage to the dashboard or scooter.
- Handle the dashboard with care to avoid physical damage.
- Keep the dashboard and its components dry. Avoid exposure to water or excessive moisture.
- If you are unsure about any installation steps, consult a qualified technician.
- WARNING: To avoid danger of suffocation, keep any plastic packaging away from babies and children. Do not use plastic bags in cribs, beds, carriages, or playpens. This packaging is not a toy.
3. Product Overview
3.1. Components
- LH-100 Dashboard Unit with LCD Display
- Integrated Throttle Lever
- 6-Pin Connector Cable
- Handlebar Mounting Bracket
- USB Charging Port (located on the underside)
3.2. Features
- Intelligent Design: Provides stable speed control and sensitive response for braking and direction changes.
- Multi-functional: Functions as a dashboard throttle with multiple speed modes.
- Precise Design: Compact and lightweight, ensuring no additional burden to the scooter.
- Durable Construction: Made of high-strength plastic material, offering impact resistance and durability. Designed for efficient heat dissipation.
- Reliable Connectivity: Durable cables and connectors ensure a low failure rate during long-term use.
3.3. Specifications
| Specification | Detail |
|---|---|
| Model | LH-100 |
| Compatibility | Mercane MX60 Smart Electric Scooter |
| Connector Type | 6-Pin |
| Material | High-strength Plastic |
| Overall Length | 12.6 cm (4.96 inches) |
| Overall Height | 11.1 cm (4.37 inches) |
| Mounting Bracket Width | 2.4 cm (0.94 inches) |
| Mounting Bracket Inner Diameter | 2.1 cm (0.82 inches) |
| Product Weight | 0.122 kg |
| Package Dimensions (L x W x H) | 18 cm x 16 cm x 3 cm |
| Origin | Mainland China |
Note: Product dimensions are based on manual measurement and may have a 1-2 cm error.
Figure 1: LH-100 Dashboard Dimensions
4. Installation
Follow these steps to install the LH-100 Dashboard:
- Prepare the Scooter: Ensure your Mercane MX60 electric scooter is completely powered off and the battery is disconnected for safety.
- Remove Old Dashboard (if applicable): Carefully disconnect the existing dashboard's wiring and unmount it from the handlebar. Note the routing of the cables.
- Connect Wiring: Locate the 6-Pin connector on the LH-100 Dashboard and connect it to the corresponding port on your scooter's wiring harness. Ensure the connection is secure and fully seated.
- Mount the Dashboard: Position the dashboard on the handlebar using the integrated mounting bracket. Secure it firmly with the provided screws. Adjust the angle for optimal visibility and ergonomic access to the throttle and buttons.
- Cable Management: Route the cable neatly and securely, ensuring it does not interfere with steering or other moving parts.
- Final Check: Double-check all connections and mounting points before reconnecting the scooter's battery and powering it on.
Figure 2: 6-Pin Connector Detail
Figure 3: Dashboard and Connector Overview
5. Operation
The LH-100 Dashboard provides intuitive control and display for your electric scooter:
- Power Button: The red button with the power icon (⏻) is used to turn the dashboard and scooter system on or off. Press and hold to power on/off.
- Mode Button: The gray button labeled "MODE" allows you to cycle through different display modes or adjust settings (e.g., speed modes, trip distance, battery level). Refer to your scooter's main manual for specific mode functionalities.
- LCD Display: The central LCD screen shows real-time information such as speed, battery status, and selected mode.
- Throttle Lever: The lever on the right side controls the scooter's acceleration. Gently press down to increase speed.
- USB Charging Port: A USB port is located on the underside of the dashboard, allowing you to charge small electronic devices.
Figure 4: LH-100 Dashboard Front View
Figure 5: USB Charging Port Location
6. Maintenance
To ensure the longevity and optimal performance of your LH-100 Dashboard, follow these maintenance guidelines:
- Cleaning: Wipe the display and body with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the plastic or screen.
- Protection: Protect the dashboard from direct impact and extreme temperatures.
- Connection Check: Periodically inspect the 6-Pin connector and mounting screws to ensure they remain secure.
- Storage: If the scooter is stored for an extended period, ensure the dashboard is clean and dry.
7. Troubleshooting
If you encounter issues with your LH-100 Dashboard, refer to the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| Dashboard does not power on | Loose 6-Pin connection Scooter battery low or disconnected Internal fault | Check and secure the 6-Pin connector. Ensure scooter battery is charged and connected. If problem persists, contact support. |
| Incorrect speed/display readings | Improper installation Sensor issue (scooter-related) Dashboard damage | Verify installation steps. Consult scooter's manual or technician. Inspect dashboard for visible damage. |
| Throttle not responding | Loose 6-Pin connection Throttle mechanism jammed Internal fault | Check and secure the 6-Pin connector. Ensure throttle moves freely. Contact support if problem persists. |
| USB charging port not working | Scooter not powered on Device incompatibility Port damage | Ensure scooter is powered on. Try a different USB device/cable. Contact support if port is damaged. |
If the issue is not resolved by the above steps, please contact customer support.
8. User Tips
While no specific user reviews or Q&A were available, here are some general tips for using your dashboard:
- Familiarize yourself with the different display modes and settings by experimenting with the 'MODE' button in a safe, stationary environment.
- Regularly check the tightness of the mounting screws to prevent the dashboard from shifting during rides.
- Keep the LCD screen clean for optimal visibility, especially in varying light conditions.
9. Warranty and Support
For detailed warranty information and customer support, please refer to the official user manual provided by the seller. A PDF version of the user manual is available for download: User manual (PDF).
If you require further assistance or have questions not covered in this manual, please contact the seller or manufacturer directly.
