1. Important Safety Information
▲ Warning!
- When adding fuel or disconnecting the connection, the valve must be closed first and can be carried out after extinguishing the fire to avoid danger!
- Do not place the oil bottle/gas tank and other susceptible explosive products too close to the stove in order to avoid danger!
- Do not use this product in a closed environment!
- Children should not use this product alone!
2. Package Contents
The BRS-8 Multi-purpose Oil and Gas Stove package typically includes the following components:
- BRS-8 multi-purpose furnace unit
- Fuel bottle (530ml)
- Air pump (new aluminum alloy air pump for BRS-8)
- Extended air pipe / Hose with valve
- Multifunctional maintenance tools

3. Setup Instructions
3.1. Fuel Oil Setup (Gasoline/Diesel/Kerosene)
- Unscrew the plastic cap of the oil bottle (1). Add 85% of the total fuel oil capacity (450ml) to the oil bottle (refer to the horizontal line on the outside of the oil bottle for details).
- Insert the pump (2) and tighten it clockwise.
- Pressurize the oil bottle with the pump handle (13) until pressure is felt when the pump handle is pressed down. Do not use excessive pressure to avoid damaging parts.
- Unfold the oil furnace support (6) and connect the hose (12) with the matching tools. Align the rib on the hose body (4) with the rib on the cylinder pump (5) and turn the plastic handle of the rib to tighten it. (If the oil bottle holder prevents the handle from turning, pull up the holder and change direction).
- Pull up the oil bottle support (11) on the cylinder and adjust its angle so that the oil bottle is placed smoothly.
3.2. Gas Canister Setup (Butane Gas)
- Unfold the oil stove support and connect the hose with the tools.
- Align the rib on the hose body with the rib on the gas tank and tighten it.


4. Operating Instructions
4.1. Operating with Fuel Oil
- Slowly open the valve (7) on the hose clockwise until a small amount of fuel is ejected. Close the valve, and use an open flame to light the ignition port (8) outside the furnace to preheat the furnace.
- After the oil stove emits a slight hissing sound, open the valve again and fine-tune it to achieve the desired flame size.
4.2. Operating with Gas Canister
- Turn the valve on the hose counterclockwise and open it until a small amount of gas is emitted. Aim an open flame at the ignition port of the upper mouth of the stove and ignite it.

5. Maintenance
- After using the oil furnace, close the valve (do not force to avoid damage). Allow the flame to slowly diminish, then blow it out directly to ensure the stove is clean. Once the stove is cooled, retract the bracket and store it.
- Regularly clean the filter element in the nozzle (10) and the round hole on the matching tool of the preheating pipe. Pull out the steel wire in the preheating pipe (9) and clean it.
- Regularly add lubricating oil to the air cylinder to prolong the use of the leather bowl.
- When opening the oil bottle, to prevent oil from ejecting, first turn the air pump counterclockwise to discharge a small amount of air, and then open the oil bottle after the air in the bottle is emptied.
- If the pump connecting shaft (14) is found to leak after a long time of use, it is due to normal wear and tear. This can be solved by slightly turning the screw in the plastic handle on the roller.
Maintenance Tip: When using fuel oil, carbon deposits can block the nozzle. It is recommended to directly flame blow-off after use to allow fuel gas to spray out for a few seconds, then close the air valve to clean the nozzle.
6. Troubleshooting
- Continuous Splashing Sound: If there is a continuous splashing sound during the use of the oil furnace, it indicates that the pressure in the oil bottle is insufficient. Please repressurize the bottle in time.
- Nozzle Blockage: If the nozzle becomes blocked due to fuel quality issues, use the configured tools to resolve it. For gasoline/gas, use the #1 nozzle; for diesel, use the #2 nozzle.
- Pump Connecting Shaft Leakage: If the pump connecting shaft (14) leaks after extended use, it is due to normal wear. Slightly turning the screw in the plastic handle on the roller can resolve this.
7. Specifications
| Feature | Specification |
|---|---|
| Product Name | BRS-8 Oil/Gas Multi-purpose Furnace |
| Model | BRS-8 |
| Power | 2050W–2850W |
| Material | Aluminum alloy, Copper alloy |
| Available Fuel | Butane gas, Gasoline, Diesel, Kerosene |
| Weight (Stove only) | 500g (excluding oil bottle) |
| Fuel Consumption | 208g/hour |
| Ignition Method | External fire source (Ignition device included) |
| Expanded Size | 194mm x 92mm |
| Storage Size (Folded) | 93mm x 92mm |
| Load Bearing | Up to 80kg |
| Preheating Tube | Professional preheating tube for low temperature and high altitude environments |
| Air Pump | New aluminum alloy air pump |
| Disposable | No |
| Origin | Mainland China |
| Package Length | 33 cm |
| Package Width | 32 cm |
| Package Height | 10 cm |
| Package Weight | 0.897 kg |

8. User Tips
- Always use high-quality fuel: For gasoline, use 92# or higher. For diesel, use -10# or higher clean oil. Ensure gas canisters are clean and suitable for camping stoves.
- The stove is designed for dual-purpose use (oil and gas), offering versatility for various outdoor conditions.
- The professional preheating tube ensures reliable performance even in low temperatures and high altitudes.
- The new aluminum alloy air pump provides improved durability and performance compared to older plastic versions.
- The split design contributes to a lower center of gravity, enhancing stability when supporting heavy cookware up to 80kg.
- Its small and light design (oil-free bottle weighs only 300g) makes it ideal for self-driving tours and backpacking.
9. Warranty and Support
For detailed warranty information and customer support, please refer to the official user manual PDF or contact the seller directly.
A comprehensive user manual in PDF format is available for download: User Manual (PDF)