1. Introduction
This manual provides comprehensive instructions for the Radtel RT-950 Pro Sand Edition Multi-Band Handheld Radio. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and safe use of your device. The RT-950 Pro is a versatile two-way radio featuring GPS, APRS, Bluetooth app programming, and reception across AM/FM/CB ham radio bands.

Figure 1: Radtel RT-950 Pro Sand Edition Multi-Band GPS/APRS Radio overview.
Key Features:
- Multi-Band TX/RX: 27 MHz, VHF/UHF (US: 144-148MHz/420-450MHz, EU: 144-146MHz/430-440MHz).
- Multi-Band RX: SW/MW/LW (153KHz – 30MHz Receive Only).
- GPS Positioning and APRS Data Communication.
- Bluetooth App Programming for iOS and Android.
- Real-time Spectrum Analyzer.
- Tri-Band Standby and Cross-Band Repeater.
- 10W High Output Power.
- Type-C Charging & Desktop Charger.
- Wireless Frequency Copy.
- NOAA Weather Channel Support.
- Full-Color Display.
- Aviation Band Reception (108-136MHz AM).
- Customizable Buttons (RADIO/MONI/SCAN/SEARCH/SOS/SPECTRUM/Beacon TX/PTTC).
WARNING: Please use the 950/950Pro with caution. Using non-Radtel brand headphones and microphones may burn out the audio amplifier module and cause the radio to be silent.
2. Getting Started
2.1 Unboxing
Upon opening the package, ensure all components are present and undamaged. The standard package includes:
- Radtel RT-950 Pro Handheld Radio
- Battery
- Antenna
- Desktop Charging Dock
- Belt Clip
- Type-C Charger (cable and power adapter)
- User Manual (this document)

Figure 2: All included accessories for Radtel RT-950 Pro.
2.2 Charging the Battery
The RT-950 Pro offers two convenient charging methods:
- Desktop Charging (Optional): Insert the battery pack or the radio with the battery pack into the charging dock. Ensure proper contact with the charging terminals.
- Type-C Charging: Connect the provided charging cable to the power adapter and plug the power adapter into an AC power outlet. Insert the charging cable into the Type-C interface of the main unit's battery.
During charging, a red indicator light signifies charging in progress. A green indicator light indicates charging is complete.

Figure 3: Radtel RT-950 Pro charging options: Desktop Charging and Type-C Charging.
2.3 Power On/Off and Volume Control
To power on the device, rotate the Power Switch/Volume Knob clockwise until a "click" is heard. To power off, rotate the knob counterclockwise until a "click" is heard. Rotate the knob clockwise to increase volume and counterclockwise to decrease volume.
3. Device Overview
3.1 Physical Components

Figure 4: Radtel RT-950 Pro Structure Introduction diagram.
- Antenna: For signal transmission and reception.
- Channel Knob: Used to select channels.
- Power Switch/Volume Knob: Controls power and audio volume.
- Indicator Light: Displays device status (e.g., charging, transmission).
- Display Screen: Full-color display for operational information.
- Accessory Interface: For connecting external accessories.
- Interface Cover Screw: Secures the accessory interface cover.
- PPT A Button: Programmable Push-to-Talk button.
- PPT B Button: Programmable Push-to-Talk button.
- Side Key 1 & 2: Programmable function keys.
- Function Keypad: Navigation and function selection.
- Numeric Keypad: For direct frequency input and other numeric entries.
- Speaker: Audio output.

Figure 5: Approximate dimensions of the Radtel RT-950 Pro (16.2cm H, 4.8cm/6.6cm W).
3.2 Display Interface and Icons
The full-color display provides real-time information about the radio's status and operations. Key icons and their meanings are:
| Icon | Description |
|---|---|
| VOX | Indicates that the VOX function is enabled. Transmission starts when the microphone's sound pressure level reaches the set threshold. |
| APRS | Automatic Packet Report System. |
| MO | Indicates that the monitor function is enabled. |
| TW | Tri-Watch Active, Simultaneously monitors 3 channels. |
| ABC | Keypad Lock, Appears when the keypad is locked. Long press the # key to unlock. |
| RSSI | Signal Strength, Indicates the strength of the received signal. |
| Z | GPS Switch & Indicator, Toggles GPS positioning with status icon. |
| Z | Repeater Mode ON. |
| Z | Repeater Mute Enabled, Speaker muted during repeater operation. |
| ♪ | Side Tone Enabled, Indicates that the side tone function is active, producing a tone sound when transmitting DTMF. |
| * | Bluetooth Enabled. |
| Battery Icon | Battery Status, Displays the remaining battery power. When nearly depleted, the outer frame flashes, and transmission is prohibited. |
| Power Save Icon | Energy-saving mode active. |
| A | Standby Indicator, Indicates the device is in standby/monitoring mode (continuously listening for signals). |
| CT | Analog Sub-audio Tone Indicator. |
| DCS | Digital Sub-audio Tone Indicator. |
| H | High Power Indicator. |
| M | Medium Power Indicator. |
| L | Low Power Indicator. |
| N | Narrowband Mode Indicator. |
| W | Wideband Mode Indicator. |
| + | Frequency Mode (+ Frequency Offset). |
| - | Frequency Mode (- Frequency Offset). |
| R | Frequency Invert, Inverts RX/TX frequencies. |
| T | Configures transceiver to operate on identical transmit/receive frequencies (simplex communication). |
| 0 | Encryption On, Indicates encryption function is activated. |
| AM | AM Modulation, Indicates the current frequency is operating in AM demodulation mode. |
| SCR | Scrambler Function, Activates voice encryption. |
4. Basic Operations
4.1 Menu Navigation
From the home screen, briefly press the 【OK】 key to enter the menu. Use the arrow Direction keys to navigate. Press 【OK】 again to confirm selections. Press the (V/M) key to exit the menu.
4.2 Frequency Modes
- Primary/Secondary Frequency Toggle: On the standby screen, briefly press the 【A/B/C】 key to select the primary frequency highlighted in blue background. Non-highlighted frequencies are secondary.
- Channel Mode / Frequency Mode Toggle: On the standby screen, briefly press the (V/M) key to switch between frequency mode and channel mode. Note: If no valid channels are stored, switching to Channel Mode is disabled.
4.3 Side Key Configuration
Side keys can be configured via programming software. Supported functions include RADIO, MONI, SCAN, SEARCH, SOS, SPECTRUM, and Beacon TX.

Figure 6: Customizable buttons for various functions on Radtel RT-950 Pro.
4.4 Super Mode Activation
To activate the extended full band transmit and receive "Super Mode", start the machine first, then press and hold the PTT button and the '8' key simultaneously.

Figure 7: Activating Super Mode for extended full band transmit and receive.
5. Advanced Features
5.1 GPS/APRS Position Sending
The RT-950 Pro supports real-time GPS tracking and APRS (Automatic Packet Reporting System) for location sharing, helping you stay connected and track positions.

Figure 8: Real-time GPS Tracking & APRS Location Sharing display.
5.2 Real-time Spectrum Analysis
The integrated spectrum analyzer allows for real-time signal analysis, helping users monitor and optimize frequency usage efficiently.

Figure 9: Real-time Spectrum Analysis display.
5.3 Cross-Band Repeater Function
The radio features a cross-band repeater function, allowing interoperability between UHF and VHF bands. To activate: Menu → Radio → AB RPT-Mode → ON. The standby screen will display the repeater icon 【Z】. Ensure devices enabling relay function operate on different frequency bands.

Figure 10: Cross Band Repeater function, showing two radios interoperating.
5.4 Wireless Frequency Copy
Effortlessly copy frequency settings and CTCSS from another radio instantly without the need for cables.

Figure 11: Quick Copy Frequency function, showing frequency cloning between radios.
5.5 NOAA Weather Channel Support
Stay informed with access to live NOAA weather alerts and updates, a crucial feature for outdoor and emergency use.

Figure 12: Live NOAA Weather Alerts feature.
5.6 FM Radio Function
Customize a side key as a radio shortcut or long-press a number key to enter radio mode. Short press 【OK】 to access the radio menu and select modulation mode. Set the radio frequency directly using the numeric keys. In radio mode, press (V/M) to toggle between Frequency Mode (VFO) and Channel Mode (MR). In Frequency Mode, short press the (#) key to activate auto-scan for stations.
5.7 PTT-ID Function
The PTT-ID function allows for DTMF transmit identity S-CODE or PTT-ID. You can assign unique call codes to each segment (A/B/C) or signal type via Menu → Signaling → S-CODE. Transmission modes include Send on Press, Send on Release, and Send Both.
5.8 CTCSS/DCS Settings
Configure CTCSS/DCS via Menu → CTCSS/DCS to select the desired code. This function enables selective call reception by filtering out unwanted noise signals.
5.9 Output Power Levels
The radio supports three power output levels: 10W, 5W, and 1W, allowing for smart switching based on communication needs.

Figure 13: Three Level Output Power (10W/5W/1W smart switching).
5.10 Aviation Band Reception
The RT-950 Pro is capable of receiving signals in the 108-136MHz AM aviation band.

Figure 14: Aviation Band Reception (108-136MHz AM band reception).
5.11 Emergency SOS Function
Assign a side key as the [Emergency Alarm] button. The SOS mode can be configured via Menu → Radio → SOS Mode. Options include Local Alarm (sounds an alarm tone locally), Transmit Alarm Tone (broadcasts the alarm tone), and Transmit Alarm Code (sends the alarm code).
5.12 Scan Function
Assign a side key as the Scan Key or configure via Menu → Radio → Scan Mode. The radio supports Channel Mode scanning (scans channels in memory) and Frequency Mode scanning (scans frequencies based on selected step setting). Scan modes include Time Mode, Carrier Mode, and Search Mode.
5.13 Voice-Activated Transmission (VOX)
Enable VOX via Menu → VOX. When enabled, the radio automatically enters transmit mode if the microphone detects sufficient sound input. Adjust VOX sensitivity level and delay time via menu settings.
6. Programming
6.1 Bluetooth App Programming
The RT-950 Pro can be easily programmed and managed via a dedicated mobile app, compatible with both iOS and Android platforms. Scan the QR codes below to download the app.

Figure 15: Bluetooth Programming App with QR codes for App Store and Android.
The app allows for easy configuration of channel info, frequency mode, and other optional settings. The programming process is displayed on the radio screen as "Program..." and shows progress.
6.2 PC Programming
The radio can also be programmed using dedicated PC software. This is particularly useful for advanced configurations and managing a large number of channels. A programming cable (often sold separately) is required to connect the radio to a computer. Ensure the correct drivers are installed for the programming cable.
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | radtel |
| Model Number | RT-950PRO |
| Radtel Model | RT-950PRO |
| Frequency Range | 27Mhz, 144-148MHz, 430-440 MHz (USA Version: 144-148/420-450MHz, EU Version: 144-146/430-440MHz) |
| SW/MW/LW RX | SW: 2.3-30MHz RX, MW: 520-1710KHz RX, LW: 153-279KHz RX |
| Output Power (W) | 5w-10w |
| Battery Capacity (mAh) | 2600mah |
| Maximum Range | 5km-10km |
| Storage Channel | 64*15 zone |
| Dimensions | 16*12.5-*5.5 cm (approx. 16.2cm H, 4.8cm/6.6cm W) |
| Walkie Talkie Type | Portable |
| Is_Display | Yes |
| Waterproof / Water-Resistant | No |
| Battery Included | Yes |
| Rechargeable Battery Included | Yes |
| Material | Plastic |
| Use | Outdoor |
| Origin | Mainland China |
| Certification | CE, FCC |
| FCC ID | 2AZSA-RT950 |
7.1 Power Meter Readings
The following table provides typical power output readings (Current/Power) for High, Low, and Middle settings across various frequencies:

Figure 16: Power Meter table for various frequencies and power settings.
8. Maintenance
8.1 Daily Maintenance
- Do not pierce or scratch the product with hard objects.
- Do not store the product in environments containing chemical corrosive substances.
- Do not carry or use the product by pulling the earphone cable.
- When not using the earphone jack, cover the interface with the protective cap.
8.2 Cleaning Procedure
Before cleaning, always power off the device and remove the battery.
- Regularly use a dry, clean, lint-free cloth or a soft brush to remove dust from the product surface and charging terminals.
- If the buttons or casing become dirty, use a neutral detergent and a non-woven cloth for cleaning. Do not use detergents, alcohol, sprays, or petroleum-based chemicals as they may damage the surface casing.
- After cleaning, ensure the product is completely dry before use.
9. Troubleshooting
- Radio not transmitting after PC programming: Ensure the programming software settings are correctly applied, the programming cable is securely connected, and the radio is in the correct mode for programming. Check for firmware updates as recommended by users.
- Power output less than advertised (e.g., 8W instead of 10W): Actual power output can vary slightly based on frequency, battery charge, and environmental factors. Refer to the Power Meter readings in the specifications section for typical values.
- Antenna issues (e.g., smallest part detaches): Inspect the antenna for any manufacturing defects or damage. Ensure it is securely screwed into the radio. If the issue persists, contact customer support for a replacement.
- Distorted voice during reception or transmission: Check audio settings, ensure the microphone is clean and unobstructed, and test with different accessories if applicable. Avoid using non-Radtel brand headphones/microphones as they may cause audio amplifier issues.
- Battery life is short: Ensure the battery is fully charged. Check if power-saving features are enabled. Battery performance can degrade over time.
10. User Tips
- Firmware Updates: It is recommended to order the product with a programming cable, as the firmware often needs to be updated to new versions for optimal performance and features.
- GPS Location: The GPS location feature is highly useful for tracking and communication.
- Multi-Frequency Monitoring: The ability to watch 3 frequencies at once is a great feature for active users.
- Audio Quality: Users praise the good finish and strong, clear audio.
- Display Usability: The colorful screen is very good; while it requires some getting used to initially, it becomes relatively simple after some use.
11. Warranty and Support
The warranty period for this product starts from the date of sale. The main unit is covered for 12 months, and the battery and charging accessories are covered for 6 months.
11.1 Warranty Exclusions
Paid repair services will be required for cases including, but not limited to:
- Failure to present the warranty card and purchase invoice.
- Alteration of the warranty card or mismatch with the product.
- Defects and damages caused by using the product under non-standard conditions, misuse, accidents, water ingress, negligence, improper testing, operation, repair, installation, modification, or adjustment.
- Defects and damages caused by unauthorized repairs or disassembly.
- Defects and damages caused by force majeure.
- Normal wear and tear from regular use.
For detailed warranty information and to register your product, please refer to the User Manual (PDF).
12. Safety Information
12.1 RF Radiation Information
This product is intended solely for professional use where RF energy radiation requirements can be met. Users must be fully aware of RF radiation hazards and take appropriate measures to comply with RF radiation limits.
RF (Radio Frequency) refers to electromagnetic frequencies that can radiate into space. It is a technology widely used in fields such as communications, medical, and food processing, and it generates a certain amount of RF radiation during use.
12.2 FCC Regulatory Requirements
In accordance with the regulations of the Federal Communications Commission (FCC) of the United States, this product must comply with FCC RF radiation limits to be sold in the U.S. market. Manufacturers are required to inform users of important safety precautions by labeling the product, thus enhancing user awareness of radiation protection. The FCC ID for this device is 2AZSA-RT950.
12.3 RF Radiation Control and Operating Instructions
To ensure optimal performance and compliance with the radiation limits for occupational or controlled environments as specified in the standards, the transmission time should not exceed a duty cycle of 50% (i.e., a maximum of 50% transmission time). Adhere to the following instructions:
- RF energy radiation is only generated during transmission (talking), not during receiving (listening) or standby mode.
- Maintain a minimum distance of 2.5 centimeters between the device and the body during transmission.
Product Overview Video
Video 1: Radtel RT-950 Pro product overview showcasing key features and functions.