Beitian BT-641G

Contents

Beitian BT-641G UM982 GNSS Receiver Module User Manual

High-Precision RTK CM-Level Positioning and Orientation

1. Introduction

The Beitian BT-641G UM982 is a high-precision GNSS receiver module designed for Real-Time Kinematic (RTK) applications, offering centimeter-level positioning and orientation capabilities. This module supports multi-channel digital communication and dual-antenna positioning, making it suitable for a wide range of demanding applications such as precision agriculture, intelligent driving, unmanned vehicles, and intelligent equipment.

This manual provides essential information for the proper setup, operation, and maintenance of your BT-641G module to ensure optimal performance and longevity.

2. Key Features

  • High-Precision RTK: Achieves centimeter-level positioning and orientation accuracy.
  • Multi-System Support: Compatible with BDS B1I/B2I/B3I, GPS L1/L2/L5, GLONASS L1/L2, Galileo E1/E5a/E5b, QZSS L1/L2/L5, and SBAS.
  • Dual Antenna Input: Supports two antennas for enhanced positioning and orientation capabilities.
  • Multi-Channel Communication: Features 1408 channels based on NebulasIV technology.
  • High Data Update Rate: Provides dual antenna 20Hz data output, with original data output up to 20Hz.
  • External Signal Indicator Lights: Equipped with PWR, TX1, TX2, and PPS indicator LEDs for status monitoring.
  • Adaptive Anti-Interference: Effectively suppresses wideband and continuous wave interference signals, performing better in complex environments.
  • Compact Design: Small volume for convenient integration into various systems.
Product features diagram showing icons for real-time dynamic differential positioning, dual antenna input, multi-channel communication, RTK horizontal accuracy, high data update rate, and external signal indicator lights.
Figure 1: Overview of BT-641G Product Features.

3. Specifications

The following table details the technical specifications for the Beitian BT-641G module:

Parameter Description (BT-641G)
Chip RTK GNSS module
Working Mode BDS B1I/B2I/B3I, GPS L1/L2/L5, GLONASS L1/L2, Galileo E1/E5a/E5b, QZSS L1/L2/L5, SBAS
Channels 1408 channels, based on NebulasIV
Single Point Positioning (RMS) Plane: 1.5 m, Height: 2.5 m
RTK (RMS) Plane: 0.8 cm + 1 ppm, Height: 1.5 cm + 1 ppm
Orientation Accuracy 0.2° / 1 m baseline
PPS Accuracy 20ns
Velocity Accuracy 0.03m/s
Cold Start < 30s
Initialization Time < 5s (typical value)
Data Update Rate Dual antenna 20Hz, ≤20Hz original data output
Data Format NMEA-0183, Unicore
Baud Rate (bps) 115200bps
Altitude ≤50,000m
Speed ≤500m/s
Gravity Acceleration ≤4g
Voltage DC 5V-14V, typical: 12V
Current 350mA
Dimensions 61.1 * 41.1 * 11.85mm
Weight 50g
Connectors 1x 1.25mm 6-pin locking seat, 1x 1.25mm 5-pin locking seat
Interface 2* MMCX-K
Operating Temperature -40°C ~ +85°C
Storage Temperature -40°C ~ +105°C
Detailed product specifications table for BT-641G and BT-641H modules.
Figure 2: Detailed Product Specifications.
Product dimensions diagram showing top, side, and bottom views with measurements.
Figure 3: Product Appearance Dimensions.

4. Setup and Connections

The BT-641G module requires proper connection of antennas, power, and communication interfaces for operation. The module features two MMCX-K antenna interfaces and two UART serial ports.

4.1 Package Contents

Before starting, ensure all components are present:

  • BT-641G Module Body (x1)
  • 1.25mm 5-pin single head wire (x1)
  • 1.25mm 6-pin single head wire (x1)

Note: This list is for reference only; detailed configuration may vary based on customer requirements.

Product list showing the BT-641G module and two types of connector wires.
Figure 4: Product List.

4.2 Interface Overview

The module provides the following interfaces:

  • MMCX-K Antenna Interfaces (ANT1, ANT2): For connecting GNSS antennas.
  • UART1 (6-pin): Primary UART communication interface.
  • UART2 (5-pin): Secondary UART communication interface.

The UART1 and UART2 interfaces are interconnected, and either can be used to provide power to the module (VCC pin).

Diagram showing the MMCX-K antenna interfaces and the 1.25mm 5-pin and 6-pin UART serial ports.
Figure 5: Interface Introduction.

4.3 Pin Definitions (UART1 & UART2)

Interface Pin No. Name I/O Description
UART1 1 GND G Ground
2 RX1 I UART communication data input, TTL level
3 TX1 O UART communication data output, TTL level
4 VCC I Main power input, 5V-14V DC, 12V recommended
5 PPS O PPS, pre-positioning low level, after positioning, high level for 1s with 100ms pulse output
6 TX3 O UART communication data output, TTL level
UART2 1 RX2 I UART communication data input, TTL level
2 GND G Ground
3 TX2 O UART communication data output, TTL level

4.4 Connection Diagrams

The BT-641G module can be configured as either a Master Station (Base Station) or a Slave Station (Mobile Station) depending on the application. Below are typical connection diagrams:

Schematic diagram of the RTK module connection as a Slave Station. Shows main antenna for positioning, auxiliary antenna for orientation, connected to computer/other devices and power.
Figure 6: Slave Station Connection Diagram.
Schematic diagram of the RTK module connection as a Master Station. Shows main antenna for positioning, connected to computer/other devices and power, and a transmitting station.
Figure 7: Master Station Connection Diagram.
RTK connection diagram illustrating a base station communicating with a mobile station (drone) via satellite signals.
Figure 8: RTK Connection Diagram (Base Station and Mobile Station).

5. Operation

The BT-641G module is designed for high-precision RTK positioning and orientation. Its operation largely depends on the configuration (Base Station or Mobile Station) and the software used for data processing.

5.1 Initial Configuration

  • Baud Rate: The default baud rate is 115200bps. If a higher frequency is used, the baud rate may need adjustment. It is not recommended to exceed 5Hz for data transmission if the data volume is large.
  • Base Station Mode: If the module is intended to function as a base station, it must be configured accordingly. This typically involves sending specific commands via the UART interface to set its role.
  • Mobile Station Mode: When used as a mobile station for RTK dynamic flow, the module can often be used directly without extensive configuration, assuming a base station is providing differential corrections.
  • Custom Development: The module supports custom development, allowing users to integrate it into their specific systems and applications.

5.2 RTK Positioning and Orientation

For high-precision RTK operation, the module requires differential correction data, typically provided by a base station. The dual antenna setup allows for accurate orientation determination in addition to precise positioning.

The module outputs NMEA-0183 and Unicore data formats, which can be processed by compatible software or microcontrollers.

6. Indicator Lights

The BT-641G module is equipped with several LED indicators to provide visual feedback on its status:

  • PWR Light (Red): Always on when power is supplied to the module.
  • TX1 Light (Blue): Flashes when data is being output from the TX1 port.
  • TX2 Light (Blue): Flashes when data is being output from the TX2 port.
  • PPS Light (Red/Blue):
    • Off: Indicates that 3D positioning has not yet been achieved.
    • Blue Flashing: Indicates that 3D positioning has been successfully achieved.
Diagram showing the location and function of PWR, TX1, TX2, and PPS indicator lights on the RTK module.
Figure 9: Indicator Lights Explanation.

7. Application Scenarios

The high-precision capabilities of the BT-641G module make it ideal for various professional and industrial applications:

  • Precision Agriculture: For accurate guidance of farming machinery and crop monitoring.
  • Intelligent Driving: Enhancing autonomous vehicle navigation and control.
  • Unmanned Vehicles (UAVs/Drones): Providing precise flight path control and mapping.
  • Intelligent Equipment: Integration into robotics, construction machinery, and other automated systems requiring high accuracy.
Images depicting various application scenarios for the GNSS receiver, including precision agriculture, intelligent driving, unmanned vehicles, and intelligent equipment.
Figure 10: Typical Application Scenarios.

8. Maintenance

To ensure the longevity and reliable performance of your Beitian BT-641G module, follow these general maintenance guidelines:

  • Environmental Protection: Operate and store the module within the specified temperature ranges (-40°C to +85°C operating, -40°C to +105°C storage). Avoid extreme temperatures, humidity, and direct exposure to water unless the enclosure provides adequate protection.
  • Cleanliness: Keep the module and its connectors clean. Use a soft, dry cloth to wipe the exterior. Avoid using harsh chemicals or solvents.
  • Connection Integrity: Periodically check all cable connections (antennas, power, UART) to ensure they are secure and free from damage. Loose connections can lead to signal loss or intermittent operation.
  • Firmware Updates: Check the manufacturer's website periodically for any available firmware updates. Keeping the firmware up-to-date can improve performance, add features, or fix bugs.
  • Physical Inspection: Regularly inspect the module for any signs of physical damage, such as cracks, dents, or bent pins.

9. Troubleshooting

This section provides solutions to common issues you might encounter with your BT-641G module.

9.1 No Power Indicator (PWR LED Off)

  • Check Power Supply: Ensure the power supply is connected correctly to the VCC and GND pins and provides the specified voltage (5V-14V DC, 12V recommended).
  • Cable Integrity: Inspect the power cable for any damage or loose connections.

9.2 No Data Output (TX1/TX2 LEDs Not Flashing)

  • Check Power: Ensure the PWR LED is on, indicating the module is powered.
  • Antenna Connection: Verify that the GNSS antennas are securely connected to the MMCX-K ports.
  • Satellite Visibility: Ensure the antennas have a clear view of the sky to receive satellite signals.
  • Baud Rate: Confirm that the communication device (e.g., computer, microcontroller) is configured to the correct baud rate (default 115200bps).
  • Module Configuration: If configured as a base station, ensure it's properly initialized. If a mobile station, ensure it's receiving differential corrections if RTK mode is expected.

9.3 No 3D Positioning (PPS LED Off)

  • Antenna Placement: Ensure antennas are placed in an open area with an unobstructed view of the sky.
  • Signal Strength: Check for any potential signal interference.
  • Initialization Time: Allow sufficient time for the module to acquire satellites and achieve a fix (cold start < 30s, initialization < 5s typical).

9.4 Inaccurate Positioning

  • RTK Correction Data: For centimeter-level accuracy, ensure the module is receiving valid RTK differential correction data from a base station or correction service.
  • Antenna Quality and Placement: Use high-quality GNSS antennas and ensure they are correctly positioned and oriented.
  • Interference: Minimize electromagnetic interference from nearby electronic devices. The module has adaptive anti-interference capabilities, but strong interference can still affect performance.

10. User Tips

No specific user tips were available from reviews or Q&A. General tips for GNSS modules include:

  • Always ensure a clear line of sight to the sky for optimal satellite reception.
  • Proper grounding is crucial for stable operation and to minimize noise.
  • When integrating into custom projects, consider using shielded cables for antenna and communication lines to prevent interference.
  • For long-term outdoor deployment, ensure the module is housed in a weather-resistant enclosure.

11. Warranty and Support

For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your vendor directly. For technical support, inquiries, or custom development assistance, please reach out to the manufacturer or your authorized distributor.

Contact Information:

  • WhatsApp: +86 13335965461
  • Online communication via AliExpress (during business hours)
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.