1. Introduction
This manual provides essential information for the safe and effective use of your KEYENCE BT-1010B series Code Reader. Please read this manual thoroughly before operating the device and keep it for future reference. The KEYENCE BT-1010B is a robust handheld code reader designed for efficient data collection and inventory management in various environments.
2. Setup
2.1 Unpacking and Inspection
Carefully unpack the device and inspect it for any signs of damage. Ensure all components are present.
2.2 Battery Installation and Charging
- Locate the battery compartment on the rear of the device.
- Insert the battery, ensuring correct polarity.
- Close the battery compartment securely.
- Connect the device to a power source using the appropriate charging cable. The charging contacts are visible at the bottom of the device.
- Allow the device to charge fully before first use.
Figure 2.2.1: Bottom view showing charging contacts and wrist strap attachment point.
2.3 Powering On/Off
- To Power On: Press and hold the power button (typically located on the side or front panel) until the screen illuminates.
- To Power Off: Press and hold the power button until a power-off prompt appears on the screen, then confirm.
Figure 2.3.1: Front view displaying the screen and keypad.
3. Operating Instructions
3.1 Basic Scanning Procedure
- Ensure the device is powered on and in scanning mode.
- Point the scanning window (located at the top of the device) towards the barcode or 2D code you wish to read.
- Press the 'SCAN' button (visible on the front panel or side).
- Hold the device steady until a successful scan indication (e.g., beep, LED flash, or on-screen confirmation) is received.
- The scanned data will typically appear on the screen.
Figure 3.1.1: Top view showing the scanning window.
3.2 Menu Navigation
Use the 'MENU' button and the directional pad to navigate through the device's settings and functions. The keypad allows for data entry and specific command inputs.
3.3 Data Management
Refer to the on-screen prompts and specific application software (if applicable) for instructions on saving, transferring, or processing scanned data.
4. Maintenance
4.1 Cleaning
- Wipe the device exterior with a soft, damp cloth.
- For the scanning window and screen, use a lint-free cloth and a mild, non-abrasive cleaner suitable for electronics.
- Do not use harsh chemicals or abrasive materials.
4.2 Battery Care
- Avoid fully discharging the battery frequently.
- Store the device with a partially charged battery if not used for extended periods.
- Replace the battery if its performance significantly degrades.
4.3 Storage
Store the device in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Low or depleted battery; Device malfunction | Charge the battery; Check battery installation; Contact support if issue persists |
| Cannot scan barcodes | Barcode damaged or unreadable; Incorrect scanning angle/distance; Scanning window dirty; Device not in scanning mode | Ensure barcode is clear; Adjust angle/distance; Clean scanning window; Switch to scanning mode |
| Screen is blank or unresponsive | Device frozen; Battery issue | Perform a soft reset (refer to specific model instructions); Recharge or replace battery |
6. Specifications
| Feature | Detail |
|---|---|
| Model(s) | BT-1010, BT-1010WBG, BT-1550, BT-1550WBG, BT-1010B |
| Brand | KEYENCE |
| Power Input | DC 3.7V, 1A |
| Laser Output | 1.0mW |
| Laser Wavelength | 655nm |
| Certification | CE |
| Origin | Mainland China |
| Typical Application | Woodworking (as per product attributes, likely for inventory/tracking) |
Figure 6.1.1: Rear view with product label detailing specifications.
7. User Tips
- Optimal Scanning: For best results, ensure the barcode is well-lit and the scanning window is clean. Try different angles if a scan fails.
- Battery Life: To maximize battery life, dim the screen brightness and enable power-saving features if available in the device settings.
- Firmware Updates: Periodically check the manufacturer's website for any available firmware updates to ensure optimal performance and compatibility.
- Wrist Strap: Utilize the wrist strap for added security and to prevent accidental drops, especially in busy work environments.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your authorized KEYENCE distributor or visit the official KEYENCE website. Keep your purchase receipt as proof of purchase.
