1. Introduction
Thank you for purchasing the OHAYO X10 Max Portable Bluetooth Speaker. This speaker is designed to deliver powerful, clear audio with deep bass, featuring IPX7 waterproofing, dazzling RGB lighting, and versatile playback options. This manual provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity.
Image: OHAYO X10 Max Portable Bluetooth Speaker, front view with RGB lighting.
2. Safety Information
- Do not expose the speaker to extreme temperatures or direct sunlight for extended periods.
- Keep the speaker away from heat sources, sharp objects, and corrosive materials.
- Ensure the charging port cover is securely closed when using the speaker near water to maintain IPX7 waterproof rating.
- Do not attempt to disassemble, repair, or modify the speaker yourself. Contact qualified service personnel if needed.
- Use only the specified charging voltage (5-20V DC via USB Type-C) to prevent damage.
- Avoid listening at high volumes for prolonged periods to prevent hearing damage.
3. Package Contents
The package typically includes:
- OHAYO X10 Max Portable Bluetooth Speaker
- USB Type-C Charging Cable
- User Manual (this document)
- Lanyard
4. Product Overview
The OHAYO X10 Max features a robust design with intuitive controls and multiple input options.
Image: Diagram showing speaker controls and ports.
Controls and Ports:
- Power Button: Press and hold to power on/off.
- Volume Down (-): Decrease volume.
- Volume Up (+): Increase volume.
- Play/Pause Button: Play or pause music. Answer/end calls.
- Bass Boost Button: Enhance bass.
- Mode Button: Switch between input modes (Bluetooth, TF Card, AUX, USB Audio).
- RGB Lighting: Dazzling light effects.
- USB Type-C Port: For charging and USB audio input.
- TF Card Slot: For TF card playback.
- AUX-IN Port: For wired audio input.
- Built-in Microphone: For hands-free calling.
5. Setup Instructions
5.1 Charging the Speaker
- Connect the provided USB Type-C cable to the speaker's charging port.
- Connect the other end of the cable to a compatible USB power adapter (5V/2A recommended).
- The power indicator lights will show charging status. A full charge takes approximately 3-4 hours.
- Ensure the charging port cover is sealed after charging to maintain waterproof integrity.
Image: Speaker with battery indicator lights, showing charging status.
5.2 Powering On/Off
- To Power On: Press and hold the Power button for 2-3 seconds until you hear an audible prompt and the RGB lights illuminate.
- To Power Off: Press and hold the Power button for 2-3 seconds until you hear an audible prompt and the lights turn off.
5.3 Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth pairing mode (indicated by a flashing blue light).
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "OHAYO X10 Max" from the list of devices.
- Once paired, you will hear a confirmation sound, and the blue light will become solid.
Image: Illustration of Bluetooth 5.3 connection with a smartphone.
5.4 True Wireless Stereo (TWS) Pairing
To achieve 360-degree surround sound, you can pair two OHAYO X10 Max speakers together.
- Ensure both speakers are powered on and not connected to any Bluetooth device.
- On one speaker (this will be the primary speaker), double-press the Play/Pause button. It will enter TWS pairing mode.
- The two speakers will automatically connect to each other. You will hear a confirmation sound once connected.
- Once TWS paired, connect your device to the primary speaker via Bluetooth as described in section 5.3.
Image: Diagram illustrating two speakers paired for True Wireless Stereo.
6. Operating Instructions
6.1 Music Playback
- Play/Pause: Press the Play/Pause button.
- Volume Up/Down: Press the '+' or '-' buttons.
- Next Track: Long press the '+' button.
- Previous Track: Long press the '-' button.
6.2 Mode Switching
The speaker supports Bluetooth, TF Card, AUX-IN, and USB Audio playback.
Image: Visual representation of the four input modes: Bluetooth, TF, AUX, USB-Audio.
- To switch modes: Press the Mode button repeatedly to cycle through available input sources.
- TF Card Playback: Insert a TF card with supported audio files (MP3, FLAC, APE, WAV) into the TF card slot. The speaker will automatically switch to TF card mode.
- AUX-IN Playback: Connect an audio device using a 3.5mm AUX cable to the AUX-IN port. The speaker will automatically switch to AUX mode.
- USB Audio Playback: Connect the speaker to a computer or other USB audio source using the USB Type-C cable. The speaker will switch to USB Audio mode. This mode also supports charging simultaneously.
6.3 Bass Boost
- Press the "BASS" button to activate or deactivate the Extra Bass mode for enhanced low frequencies.
Image: Diagram highlighting the independent bass channel and 25W bass output.
6.4 RGB Dazzling Lights
- The speaker features 6 dazzling RGB light effects that synchronize with the music.
- To turn the lights on/off or cycle through effects, refer to the specific button on your speaker (often integrated with the Mode or a dedicated Light button).
Image: Visuals of the speaker's 6 dazzling RGB light effects.
6.5 Hands-Free Calling
- When connected via Bluetooth, incoming calls will pause music playback.
- Press the Play/Pause button to answer an incoming call.
- Press the Play/Pause button again to end the call.
- Long press the Play/Pause button to reject an incoming call.
Image: Person using the speaker for hands-free calling with a smartphone.
7. Maintenance
7.1 Cleaning
- Wipe the speaker with a soft, damp cloth.
- Do not use abrasive cleaners, alcohol, or chemical solvents.
7.2 Waterproof Care (IPX7)
- The speaker is IPX7 waterproof, meaning it can be submerged in up to 1 meter of water for 30 minutes.
- Always ensure the charging port cover is completely sealed before exposing the speaker to water.
- After exposure to water, wipe the speaker dry before charging or opening any ports.
Video: Demonstration of the speaker's IPX7 waterproof capabilities.
7.3 Battery Care
- Charge the speaker fully before first use.
- To preserve battery life, charge the speaker at least once every 3 months if not used regularly.
- Avoid fully discharging the battery frequently.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery. | Charge the speaker fully. |
| Cannot pair via Bluetooth. | Speaker not in pairing mode; device Bluetooth off; too far from speaker. | Ensure speaker is in pairing mode (flashing blue light). Turn Bluetooth on your device. Move device closer to speaker (within 20m/66ft). Forget previous pairings on your device and try again. |
| No sound. | Volume too low; incorrect input mode; device not playing. | Increase speaker and device volume. Check if the correct input mode is selected. Ensure music is playing on your connected device. |
| TWS pairing fails. | Speakers already connected to another device; incorrect pairing procedure. | Ensure both speakers are disconnected from any Bluetooth device. Follow TWS pairing steps carefully (Section 5.4). |
| Sound distortion. | Volume too high; low battery; interference. | Reduce volume. Charge the speaker. Move away from sources of interference. |
9. Specifications
| Feature | Detail |
|---|---|
| Model | Ohayo X10 Max |
| Bluetooth Version | 5.3 |
| Bluetooth Profile | A2DP V1.3, AVRCP V1.4, HFP V1.6 |
| Audio Codec | SBC |
| Bluetooth Range | Up to 20m / 66ft (open area) |
| IP Rating | IPX7 Waterproof |
| Output Power | 35W |
| Input Power | USB (5-20V DC), 5V/2A via Type-C port |
| Frequency Range | 65Hz – 20kHz |
| Playtime | Up to 24 Hours (varies with volume and light use) |
| Charging Time | 3-4 Hours |
| Dimensions (H x W x D) | 185mm x 75mm x 75mm |
| Weight | 580 ± 10g |
| Signal-to-Noise Ratio | 80 dB |
| Sound Modes | Stereo Sound Mode, Extra Bass Mode, Standard Mode |
| Input/Output | TF Card, AUX, USB Audio, Bluetooth |
| Control Type | Playback, Volume control, Input selector, EQ |
| Certification | CE, FCC, RoHS, KC, WEEE |
Image: Diagram showing the dimensions of the OHAYO X10 Max speaker (185mm H x 75mm W x 75mm D).
10. User Tips
- Maximize Battery Life: To get the full 24 hours of playtime, consider turning off the RGB lights when not needed, as they consume power.
- Optimal Sound Placement: For the best audio experience, especially with TWS pairing, place the speakers at an equal distance from your listening position.
- Water Protection: Always double-check that the charging port cover is tightly sealed before taking the speaker near water or using it outdoors in wet conditions.
- Versatile Use: Don't forget to utilize the TF card and AUX-IN options for playback when Bluetooth isn't available or preferred. USB Audio mode is great for direct connection to a computer while charging.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Ohayo website or contact your retailer. Keep your proof of purchase for any warranty claims.
A digital version of this user manual is available for download: OHAYO X10 Max User Manual (PDF)
