1. Product Overview
The SMAEL 8133 is a robust digital-analog wristwatch designed for an active lifestyle, featuring a durable alloy case, comfortable silicone strap, and multiple functions including a stopwatch, alarm, and LED display.

Key Features:
- Analog-Digital Display
- Stop Watch & Chronograph
- Shock Resistant
- LED Night Light Display
- Complete Calendar & Week Display
- Alarm Mode & Chime at the Correct Time
- 50 Meters Water Resistance
- 12/24 Hour System
- Ultra Long Life Battery
- Shatterproof Hardlex Dial Window

2. Watch Components and Controls
Familiarize yourself with the watch's buttons and display areas:

- LIGHT Button: Activates the LED night light.
- START/STOP Button: Used to start and stop the stopwatch, and for setting adjustments.
- CLOCKWISE KEY (Crown): Used for setting analog time.
- ADJUST KEY: Used for setting adjustments in various modes.
- MODE KEY: Cycles through different modes (Time, Alarm, Stopwatch).
- RESET Button: Resets the stopwatch or confirms settings.
3. Setup and Time Setting
3.1 Setting Analog Time
- Pull out the CLOCKWISE KEY (Crown) on the right side of the watch.
- Rotate the crown to adjust the hour and minute hands to the desired time.
- Push the crown back in to start the analog movement.
3.2 Setting Digital Time and Date
- Press the MODE KEY repeatedly until you reach the Time Setting mode (usually indicated by flashing digits).
- Use the RESET Button to select the digit you wish to adjust (e.g., seconds, minutes, hours, month, date, day of week).
- Use the START/STOP Button or ADJUST KEY to increase or decrease the selected value.
- Continue pressing the MODE KEY to cycle through settings and the RESET Button to confirm each setting.
- Once all settings are complete, press the MODE KEY to exit the setting mode.
3.3 Setting the Alarm
- Press the MODE KEY until you reach the Alarm mode (often indicated by 'AL' or an alarm icon).
- Use the RESET Button to select the hour or minute digits.
- Use the START/STOP Button or ADJUST KEY to set the desired alarm time.
- Press the MODE KEY to confirm and exit the alarm setting.
- To activate/deactivate the alarm, typically press the START/STOP Button while in Alarm mode. An alarm icon will appear/disappear on the display.
4. Operating Instructions
4.1 Using the Stopwatch (Chronograph)
- Press the MODE KEY until you enter the Stopwatch mode (often indicated by 'ST' or 'CHRO').
- Press the START/STOP Button to start timing.
- Press the START/STOP Button again to pause timing.
- Press the RESET Button to reset the stopwatch to zero.
- To record split times, press the RESET Button while the stopwatch is running. The display will show the split time while the stopwatch continues to run in the background. Press RESET again to return to the running time.
4.2 Activating the LED Night Light
Press the LIGHT Button (usually located on the top left) to illuminate the digital display for easy reading in low-light conditions. The light will typically stay on for a few seconds.

4.3 12/24 Hour System
In Time Setting mode, when adjusting the hour, you can usually toggle between 12-hour (with AM/PM indicator) and 24-hour formats by pressing the ADJUST KEY or START/STOP Button when the hour is selected.
5. Maintenance
5.1 Cleaning Your Watch
- Wipe the watch case and strap regularly with a soft, damp cloth to remove dirt and sweat.
- For the silicone strap, mild soap and water can be used. Rinse thoroughly and dry completely.
- Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the watch's finish and seals.
5.2 Water Resistance
The SMAEL 8133 watch is rated for 50 meters (5 ATM) water resistance.

This means it is suitable for:
- Daily use, splashes, rain, and showering (cold water only).
- Brief immersion in water.
Important Water Resistance Precautions:
- DO NOT press any buttons while the watch is submerged in water or wet.
- DO NOT expose the watch to hot water, steam, or extreme temperature changes (e.g., hot showers, saunas), as this can compromise the water-resistant seals.
- While 50M water resistance allows for brief immersion, it is generally NOT recommended for swimming, diving, or prolonged water activities.
5.3 Battery Replacement
The watch uses an ultra-long-life battery. When the display becomes dim or functions become erratic, it's time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and water resistance integrity.
6. Troubleshooting
- Digital display is blank or dim: The battery may be low or depleted. Replace the battery.
- Analog hands are not moving: Check if the crown is pushed in completely. If it is, the battery for the analog movement might be depleted, or there could be a mechanical issue.
- Buttons are unresponsive: Ensure the watch is not in a locked mode (if applicable, though not a common feature for this model). Try resetting the watch by holding down all buttons simultaneously for a few seconds (if this doesn't work, consult a technician).
- Water inside the watch (fogging): This indicates a breach in the water resistance. Avoid further water exposure and have the watch inspected by a professional immediately to prevent further damage.
- Time is inaccurate: Re-set both analog and digital times carefully following the instructions in Section 3. If the issue persists, the movement may require servicing.
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | SMAEL |
| Model Number | 8133 |
| Display Type | Analog-Digital |
| Movement | Digital |
| Case Material | Alloy |
| Case Shape | Square |
| Case Thickness | 18mm |
| Dial Diameter | 53mm (from product data), 46mm (from diagram) |
| Dial Window Material Type | Hardlex |
| Band Material Type | Silicone (Silica Gel) |
| Band Width | 20mm |
| Band Length | 23cm (from product data), 130mm/80mm (from diagram) |
| Clasp Type | Buckle |
| Water Resistance Depth | 5Bar (50 Meters) |
| Battery Included | Yes |
| Wearing Range | 140mm-230mm |
| Net Weight | 59g |
| Origin | Mainland China |

8. User Tips
- Water Resistance Clarification: While rated 50M, this watch is best suited for splashes, rain, and brief immersion. Avoid using it for swimming, diving, or hot showers to prevent damage to internal components and seals.
- Button Operation: The multi-function buttons are designed for easy adjustment. Ensure a firm press for each function.
- Night Visibility: The LED night light provides excellent visibility in the dark. Use it sparingly to conserve battery life.
- Strap Comfort: The silicone strap is designed for comfort and durability. Clean it regularly to maintain its condition and prevent skin irritation.
9. Warranty and Support
For any issues or inquiries regarding your SMAEL 8133 watch, please contact the seller or authorized service center. Keep your purchase receipt as proof of purchase for any warranty claims.