REOBRIX NO.77001

Contents

REOBRIX NO.77001 Desert Eagle Pistol Building Blocks Instruction Manual

Model: NO.77001 | Brand: REOBRIX

Introduction

Thank you for choosing the REOBRIX NO.77001 Desert Eagle Pistol Building Blocks set. This set allows you to construct a hyper-realistic replica of the iconic Desert Eagle pistol using 356 precision building blocks. Designed for enthusiasts of military weapons and DIY toys, this model offers an engaging building experience and interactive play features, including simulated shooting functions. Please read this manual carefully before assembly and operation to ensure safe and enjoyable use.

Safety Information

  • Age Recommendation: This product is recommended for ages 14+ and 18+.
  • Small Parts Warning: This set contains small parts. Please keep them away from children under 3 years of age to prevent accidental swallowing.
  • Material Safety: All building blocks are made from eco-friendly, non-toxic ABS plastic with smooth edges, free from burrs and sharp parts.
  • Bullet Safety: The included "bullets" are made of soft, harmless materials. However, for safety, do not aim or fire at people or animals.
  • California Proposition 65 Warning: ⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Package Contents

Upon opening the box, please verify that all components are present:

  • Building Blocks (approximately 356 pieces)
  • Detailed Instruction Manual (physical copy)
  • Soft "Bullets" (red, quantity as specified in the physical manual)

If any parts are missing or damaged, please contact customer support.

Assembly Instructions (Setup)

Follow the detailed instructions provided in the physical manual included with your set for step-by-step assembly. The construction process involves assembling 356 precision bricks to form the Desert Eagle pistol model. Pay close attention to the diagrams and ensure all connections are secure.

The assembly process is designed to be engaging and educational, enhancing hand-eye coordination and problem-solving skills. The difficulty level is rated as medium (3 out of 5 stars).

Assembled REOBRIX Desert Eagle Pistol Building Block Model with red bullets
Figure 1: Fully assembled Desert Eagle Pistol Building Block Model.
Diagram of Desert Eagle pistol model with labeled parts: Muzzle, Trigger, Grip, Sliding Sleeve, Aim Point
Figure 2: Key components of the Desert Eagle model, including Muzzle, Trigger, Grip, Sliding Sleeve, and Aim Point.

Operating Instructions

Once assembled, your Desert Eagle pistol model features interactive simulated shooting functions. Follow these steps for operation:

  1. Load the Magazine:

    Locate the detachable magazine at the bottom of the pistol grip. Remove the magazine by pressing the release button (if applicable, refer to your physical manual for exact mechanism). Insert the soft "bullets" into the magazine. Reinsert the loaded magazine firmly into the pistol grip until it clicks into place.

    Step 1: Removing the magazine and inserting bullets into the clip. Step 2: Pulling the trigger.
    Figure 3: Loading the removable clip and preparing to fire.
  2. Prepare to Fire:

    The model features a sliding sleeve mechanism. Pull back the sliding sleeve to chamber a "bullet" and prepare the firing mechanism. This action mimics the real pistol's slide operation.

  3. Fire the Pistol:

    Aim at a safe target (never at people or animals). Pull the trigger to fire the soft "bullet". The model is designed for dual-shot capability, allowing it to fire two rounds at a time if loaded accordingly.

    Step 3: Bullet shooting out from the muzzle after pulling the trigger.
    Figure 4: Demonstrating the firing action of the soft bullet.

Watch the official product video for a visual demonstration of the loading and firing process:

Video 1: Demonstration of the REOBRIX Desert Eagle Pistol Building Blocks assembly and firing mechanism.

Maintenance

  • Cleaning: Wipe the blocks with a dry or slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners.
  • Storage: Store the assembled model and spare parts in a cool, dry place away from direct sunlight to prevent material degradation or discoloration.
  • Handling: Handle the model with care to avoid accidental disassembly or damage to delicate parts.

Troubleshooting

Problem Possible Cause Solution
Pistol does not fire "bullets".
  • Magazine not properly loaded or inserted.
  • Sliding sleeve not pulled back completely.
  • "Bullet" jammed or incorrectly placed.
  • Ensure magazine is fully inserted and locked.
  • Pull the sliding sleeve back until it locks into position.
  • Check the barrel and magazine for any obstructions or misaligned "bullets".
Parts are loose or fall off easily.
  • Blocks not fully pressed together during assembly.
  • Incorrect block placement.
  • Re-examine the assembly steps in the physical manual.
  • Firmly press all blocks together to ensure a secure connection.
Missing or damaged parts.
  • Manufacturing defect or oversight.
  • Contact REOBRIX customer support with your purchase details for assistance.

Specifications

Feature Detail
Product Name Desert Eagle Pistol Building Blocks
Model Number NO.77001
Brand REOBRIX
Number of Pieces Approximately 356 PCS
Product Material Eco-friendly ABS Plastic
Assembled Product Size 26 cm (Length) x 17 cm (Height) x 5 cm (Width)
Box Size 19.5 cm x 7.5 cm x 14 cm
Recommended Age 14+ years, 18+ years
Features Hyper-realistic design, detachable magazine, bullet firing capability (soft bullets), slide linkage, dual-shot design.
Certification CE Certified
Dimensions of the assembled Desert Eagle pistol model and its packaging box.
Figure 5: Product and packaging dimensions.

User Tips

  • Enjoy the Build: Many users find the assembly process itself to be very enjoyable and rewarding. Take your time and savor the construction.
  • Display with Pride: Once completed, the model looks fantastic and makes for an excellent desktop ornament or display piece.
  • Double-Check Connections: For optimal functionality and stability, ensure all blocks are firmly connected during assembly.

Warranty and Support

REOBRIX products are designed for quality and durability. For any issues regarding missing parts, defects, or operational questions not covered in this manual, please refer to the contact information provided in your product packaging or visit the official REOBRIX website for customer support.

© 2024 REOBRIX. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.