Hobbywing X8 G2

Contents

Hobbywing X8 G2 Integrated Drone Propulsion System User Manual

Model: X8 G2 | Motor: 8120-100KV | Propeller: 3011S

1. Introduction

Thank you for choosing the Hobbywing X8 G2 Integrated Drone Propulsion System. This new-generation system is designed for agricultural UAVs, offering superior performance, reliability, and ease of use. It integrates the motor, ESC, and propeller into a single, optimized unit, providing efficient and powerful propulsion for your drone applications.

Hobbywing X8 G2 Motor and 3011S Propeller system overview

Figure 1: Overview of the Hobbywing X8 G2 Integrated Drone Propulsion System.

2. Safety Guidelines

Please read and understand all safety instructions before operating the X8 G2 propulsion system. Failure to follow these guidelines may result in injury, damage to the product, or other property damage.

  • Always ensure all connections are secure before flight.
  • Operate drones in open areas, away from people, animals, and obstacles.
  • Regularly inspect propellers for damage before each flight. Replace damaged propellers immediately.
  • The system features multiple protection mechanisms including over-current, motor stall, throttle loss, temperature anomaly monitoring, and over/under-voltage protection. These are designed to enhance flight safety.
  • The motor is designed with IPX6 ingress protection and high-temperature resistant enamel wire (up to 200°C) for durability in harsh environments.
  • This product is not a toy. Recommended age for users is 14 years and above.
X8 G2 system with Multiple Protection Mechanisms for Secure Flights

Figure 2: Multiple Protection Mechanisms for Secure Flights.

3. Product Overview

The Hobbywing X8 G2 is an advanced integrated propulsion system featuring a powerful 8120-100KV motor, an 80A FOC ESC, and a 3011S folding propeller. Its robust design includes an aluminum alloy tube clamp and base, a reinforced internal beam, and a triple interlocking structure for consistent performance and enhanced protection against impacts.

  • Integrated Design: Motor, ESC, and propeller are optimized as a single unit.
  • Lightweight: The X8 G2 system (including propeller) weighs 1095g, a 5% reduction compared to the previous X8 model (1150g).
  • Durable Construction: Features aluminum alloy components for reliable structural integrity.
  • 3011S Folding Propeller: Designed for efficiency and compact storage.
Reliable Structural Design of X8 G2 showing aluminum alloy components

Figure 3: Reliable Structural Design with Aluminum Alloy Components.

X8 G2 with 3011S folding propeller and reduced weight information

Figure 4: 3011S Folding Propeller and Weight Reduction.

4. Installation and Setup

Follow these steps to properly install and set up your X8 G2 propulsion system on your agricultural UAV.

4.1 Mounting the System

  1. Refer to the CAD diagram for precise dimensions and mounting hole locations.
  2. Secure the propulsion system to your drone's arm using appropriate M5 and M3 screws as indicated in the diagram.
  3. Ensure the system is firmly attached and there is no wobble.

4.2 Wiring Connections

Connect the power and signal cables according to your flight controller's specifications and the provided wiring diagram.

  • Power Cable: The system uses 14AWG power cables. Connect the red wire to positive (+) and the black wire to negative (-).
  • Signal Cable: Utilize the 5-Pin cable and JR-3P Male Connector for signal transmission to your flight controller. Ensure correct pin assignments.
X8-G2 Propulsion System-D40 CAD diagram with dimensions and wiring details

Figure 5: X8-G2 Propulsion System CAD Diagram with Dimensions and Wiring.

4.3 Flight Controller Matching and Parameter Adjustment

The X8 G2 system supports multiple parameter adjustment modes for optimal performance.

  • Connect the system to your flight controller and perform the necessary calibration as per your flight controller's manual.
  • Use a remote controller or the DataLink host computer software to adjust drive parameters, motor rotation direction, and LED color settings.
  • The DataLink software also facilitates efficient multi-ESC firmware upgrades via OTA (Over-The-Air) functionality.
Multiple Parameter Adjustment Modes for flight controller matching and operation settings

Figure 6: Parameter Adjustment Modes and Flight Controller Matching.

5. Operation

Once installed and configured, the X8 G2 system is ready for operation. Ensure all pre-flight checks are completed before initiating flight.

5.1 Pre-Flight Checks

  • Verify all wiring connections are secure.
  • Inspect propellers for any cracks, chips, or deformities.
  • Ensure the drone battery is fully charged and properly connected.
  • Confirm flight controller settings are correct for the mission.

5.2 Data Logging (Black Box)

The X8 G2 comes with an independent black box feature that supports up to 20 hours of operation data storage. This data is invaluable for post-flight analysis and troubleshooting.

  • In case of abnormal conditions or for routine performance review, access the stored data via the DataLink host computer software.
  • The data can be used for fast fault diagnosis and troubleshooting.
Independent Black Box feature with 20 hours of data storage

Figure 7: Independent Black Box for Operation Data Storage.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your X8 G2 propulsion system.

  • Cleaning: After use, especially in harsh environments (rain, pesticide mist, dust), the motor can be rinsed with water due to its IPX6 ingress protection. Ensure it is completely dry before next use.
  • Propeller Inspection: Regularly check the 3011S folding propellers for any signs of wear, cracks, or damage. Replace them if necessary to maintain flight stability and safety.
  • Firmware Updates: Periodically check for and apply firmware updates using the DataLink host computer software to ensure your ESCs are running the latest optimizations and features.
  • Connection Checks: Routinely inspect all electrical connections for corrosion or looseness.
X8 G2 motor highlighting IPX6 ingress protection and high-temperature resistant enamel wire

Figure 8: Ultra-Strong Protection for Harsh Environments.

7. Troubleshooting

This section provides guidance for common issues you might encounter.

Problem Possible Cause Solution
Motor not spinning or erratic behavior
  • Loose wiring connection
  • Motor stall protection triggered
  • ESC issue
  • Incorrect parameter settings
  • Check all power and signal cables.
  • Inspect for obstructions around the motor/propeller.
  • Review DataLink logs for error codes.
  • Verify motor rotation direction and other parameters via DataLink software.
Drone loses power or shuts down mid-flight
  • Over-current or over/under-voltage protection triggered
  • Battery issue
  • Throttle loss protection
  • Check battery voltage and capacity.
  • Examine DataLink logs for protection activation.
  • Ensure proper throttle signal from flight controller.
Unusual vibrations or noise
  • Damaged or unbalanced propeller
  • Loose mounting screws
  • Motor bearing wear
  • Inspect and replace propellers if damaged.
  • Tighten all mounting screws.
  • Consult support if motor bearing noise persists.

For complex issues, utilize the Independent Black Box data logging feature and the DataLink host computer software for detailed fault diagnosis.

8. Specifications

Feature Specification
Motor Model 8120 100KV
ESC Model 80A FOC
Propeller 3011S Folding Propeller
Max Thrust 17.5 kg
Thrust per Rotor 5-7.5 kg
Tube Diameter 40mm
Ingress Protection IPX6
Material Composite Material
System Weight (incl. prop) 1095g
Data Logging Up to 20 hours (Independent Black Box)
Power Source External (No internal battery)
Recommended Age 14+ years

9. User Tips

  • Regular Firmware Checks: Always ensure your ESCs have the latest firmware for optimal performance and compatibility.
  • Environmental Awareness: While the system is IPX6 rated, prolonged exposure to extreme conditions should be minimized. Always clean the system after operating in wet or dusty environments.
  • Propeller Balance: Even minor imbalances in propellers can lead to vibrations. Consider checking propeller balance periodically for smoother flights.
  • Data Analysis: Make it a habit to review the black box data logs, especially after new configurations or unusual flight events, to proactively identify potential issues.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your authorized Hobbywing dealer or the seller directly. Keep your purchase receipt as proof of purchase.

For direct inquiries, you may reach out to the DM Drone Motor Store.

© 2023 Hobbywing. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.