WJCOOLMAN Dreamer

Contents

WJCOOLMAN Dreamer M-ATX Computer Case User Manual

Model: Dreamer | Brand: WJCOOLMAN

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your WJCOOLMAN Dreamer M-ATX Computer Case. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

2. Warnings & Safety Information

  • ⚠ WARNING: Do not use in humid environments.
  • ⚠ WARNING: Do not disassemble internal components without authorization.
  • ⚠ WARNING: Ensure adequate ventilation to prevent overheating.
  • Avoid high-temperature and high-humidity environments.
  • Do not forcibly compress or deform the case.
  • Prevent liquids from entering the interior.

3. Feature Highlights

  • Secondary Screen Version: Features an 8.8-inch LCD screen with 480*1920 HD pixels for clear presentation and personalized display.
  • Panoramic Sea-View Design: High-transparency tempered glass panels offer an immersive view of internal components.
  • Advanced Cooling Support: Supports up to 360mm water cooling radiators and multiple 120mm fans for optimized thermal dissipation.
  • Integrated Structure: Innovative one-piece molding design simplifies installation and wiring.
  • One-Line Fan Connection: Motherboard direct connection technology allows a single cable to synchronize control of multiple fan lights and speeds, reducing cable clutter.
  • PWM Intelligent Temperature Control: Fans feature intelligent speed adjustment (600-1800 RPM ±10%) based on internal chassis heat, effectively reducing noise (18.5-30.3 dBA max).
  • Hydraulic Bearing Fans: Ensures high-speed operation, reduces wear, minimizes noise, and extends fan service life.
  • ARGB Lighting Effects: Features ARGB colorful synchronized integrated fans with 16.5 million color lighting effects, compatible with popular RGB sync technologies (AURA SYNC, MSI MYSTIC LIGHT SYNC, RGB FUSION 2.0, ASRock POLYCHROME SYNC).
  • Ample Storage: Supports up to 3 SSDs and 2 HDDs.
  • Rich Connectivity: Top panel includes HD Audio, 1x USB 3.0, and 1x USB 2.0 ports, along with power, restart, and LED strip mode buttons.
  • Dust Prevention: Equipped with magnetic top and pull-out bottom dust filters for easy cleaning and hardware protection.
  • Shock-Absorbing Design: Both sides feature shock-absorbing pads to reduce resonance and further decrease noise.
  • Graphics Card Compatibility: Supports graphics cards up to 400mm in length with 4-slot expansion.
  • CPU Cooler Clearance: Accommodates CPU coolers up to 157mm in height.
  • Motherboard Support: Compatible with Micro-ATX and ITX form factor motherboards.

Video: Overview of the WJCOOLMAN Dreamer M-ATX Computer Case features and design.

Image highlighting integrated structure, infinite mirror lighting, one-line motherboard connection, PWM temperature control, and hydraulic bearings.

Image: Key features including integrated structure and fan technology.

Diagram illustrating the hydraulic bearing mechanism within a fan, highlighting its design for reduced wear and noise.

Image: Hydraulic bearing technology for fan durability and quiet operation.

4. Specifications

AttributeValue
Brand NameWJCOOLMAN
Model NumberDreamer
Chassis TypeDesktops
ApplicationDesktop
Form FactorMicroATX, ITX
MaterialSteel, Tempered glass, others
Case Size (L*W*H)418*280*375mm (including foot pads)
Case Weight6.5kg
Max GPU Length400mm
Max CPU Cooler Height157mm
Power ModelATX
Power Supply MountedBottom
RGB SupportNO RGB (Case itself, but supports ARGB components)
120mm Fan OptionsUp to 9 fans
Radiator Size SupportUp to 360mm
Hard Drive SupportSSD*3 and HDD*2
Front I/O PortsHD Audio, 1x USB 3.0, 1x USB 2.0, Power, Reset, LED Mode
Secondary Screen8.8-inch LCD, 480*1920 HD pixels

Fan Specifications (Typical)

AttributeValue
Fan Size362(L)*120(W)*27mm(H)
Cooling MethodAir Cooling
Speed600-1800RPM ±10%
Noise Level18.5-30.3 dB(A)
Wind Pressure1.59 mmH2O
Rated Voltage12VDC
Working Current0.66A
Bearing TypeHydraulic
Lighting Interface3-Pin
Power Interface4-Pin

Cooling System Layout

LocationFan Support (120mm)Radiator Support
Top3240mm / 360mm
Bottom3240mm / 360mm
Motherboard Side2240mm
Rear Panel1120mm
Diagram showing the dimensions of the WJCOOLMAN Dreamer case: 418mm length, 280mm width, 375mm height.

Image: Product dimensions (418mm x 280mm x 375mm).

Diagram illustrating fan and water cooling positions within the case, showing support for fans on the top, bottom, motherboard side, and back panel, and radiators on the motherboard side, top, bottom, and back panel.

Image: Fan and water cooling installation positions.

5. Setup Instructions

  1. Preparation: Place the computer case on a stable, level surface. Ensure you have all necessary components (motherboard, CPU, GPU, RAM, storage, PSU, fans/radiators) and tools (screwdrivers, cable ties).
  2. Install Motherboard: Secure your Micro-ATX or ITX motherboard to the designated standoffs inside the case.
  3. Install CPU and Cooler: Install your CPU onto the motherboard, then mount your CPU cooler (air cooler up to 157mm height or water cooling radiator).
  4. Install Graphics Card: Insert your graphics card into the PCIe slot. The case supports GPUs up to 400mm in length.
  5. Install Storage Drives: Install up to three SSDs and two HDDs into their respective slots/brackets.
  6. Install Power Supply: Mount your ATX power supply in the bottom-mounted compartment.
  7. Install Fans/Radiators: Install additional 120mm fans or water cooling radiators as needed in the supported locations (Top, Bottom, Motherboard side, Rear Panel). Utilize the one-line connection technology for ARGB fans to simplify wiring.
  8. Cable Management: Route all cables neatly to ensure optimal airflow and aesthetics.
  9. Connect Peripherals: Connect the power cord and any other necessary peripherals (monitor, keyboard, mouse) to your system.
Image showing internal components installed in the WJCOOLMAN Dreamer case, highlighting CPU cooler height limit of 157mm and GPU length limit of 400mm.

Image: Internal component clearance for CPU cooler and GPU.

Diagram showing the top I/O panel with HD Audio, USB 2.0, USB 3.0, Power switch, Restart button, Indicator light, and LED strip mode button.

Image: Front I/O panel layout and connections.

Diagram showing a fan with a 4-pin PWM connector, illustrating the connection for intelligent temperature control.

Image: PWM fan connection for intelligent temperature control.

6. Operating Instructions

  1. Power On: Press the power button located on the top I/O panel to turn on your computer.
  2. Secondary Screen: The 8.8-inch LCD secondary screen will display information or custom content. Refer to your motherboard's software or the case's dedicated software (if applicable) for customization options.
  3. ARGB Lighting: Use the LED strip mode button on the top I/O panel to cycle through different ARGB lighting effects, or control them via your motherboard's RGB software.
  4. Fan Control: Fans with PWM intelligent temperature control will automatically adjust speed based on system temperature. Manual control may be available through motherboard software.

7. Maintenance

  • Dust Cleaning: Regularly clean the magnetic top and pull-out bottom dust filters to maintain optimal airflow and prevent dust buildup inside the case. Simply remove the filters, clean them with water or a soft brush, and reattach.
  • Environmental Conditions: Always operate the case in a well-ventilated area, away from direct sunlight, high temperatures, and excessive humidity.
  • Liquid Prevention: Keep liquids away from the computer case to prevent damage to internal components.
  • Physical Handling: Avoid applying excessive force or deforming the case. Do not place heavy objects on top of the case.
Image showing the magnetic top dust filter and the pull-out bottom dust filter for easy cleaning.

Image: Magnetic top and pull-out bottom dust filters.

8. Troubleshooting (FAQs)

  • Unit fails to power on:
    • Check all power connections, including the power supply unit (PSU) cables to the motherboard and components, and the main power cord to the wall outlet.
    • Ensure the power switch on the PSU is in the 'ON' position.
    • Verify that the front panel power button cable is correctly connected to the motherboard.
  • Poor heat dissipation:
    • Clean any accumulated dust from the case's dust filters and internal components (fans, radiators, heatsinks).
    • Ensure all case fans are spinning correctly and are oriented for optimal airflow (intake/exhaust).
    • Consider adding additional fans if all fan slots are not utilized.
  • Excessive noise:
    • Verify that all screws, especially those holding fans, hard drives, and side panels, are securely tightened. Loose components can vibrate and cause noise.
    • Check fan blades for any obstructions or damage.
    • Ensure cables are not interfering with fan rotation.

9. User Tips

  • Cable Management: Take advantage of the case's design for routing cables behind the motherboard tray to achieve a clean look and improve airflow.
  • RGB Customization: Explore your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync) to fully customize the ARGB lighting effects of your fans and other components for a personalized aesthetic.
  • Secondary Screen Utility: Utilize the secondary screen for monitoring system stats (CPU/GPU temperature, usage), displaying custom images, or even small animated GIFs to enhance your setup.
  • Regular Cleaning: Make a habit of cleaning the dust filters every 1-2 months, or more frequently if your environment is dusty, to maintain peak cooling performance.

10. Warranty & Support

  • Warranty Period: This product comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
  • Further Assistance: For more detailed information or technical support, please refer to the official user manual PDF available at WJCOOLMAN Dreamer User Manual (PDF).
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.