WJCOOLMAN Dreamer PLUS

Contents

WJCOOLMAN Dreamer PLUS Desktop Computer Case User Manual

Model: Dreamer PLUS

Brand: WJCOOLMAN

1. Introduction

The WJCOOLMAN Dreamer PLUS is a high-performance desktop computer case designed for enthusiasts seeking both aesthetic appeal and superior cooling capabilities. Featuring a full side-exposed 'sea view' design with high-transparency tempered glass, it offers a panoramic display of your internal components. This case supports extensive cooling solutions, including 360-degree water cooling, and is compatible with a variety of motherboard form factors. Its thoughtful design includes easy installation features, efficient thermal dissipation, and vibrant ARGB lighting effects to enhance your gaming or workstation setup.

Video: WJCOOLMAN Dreamer PLUS Product Showcase. This video demonstrates the case's design, internal layout, and ARGB lighting effects.

2. Warnings & Safety Information

  • Environmental Conditions: Do not use this product in humid environments to prevent electrical hazards and damage to components.
  • Disassembly: Do not disassemble internal components without authorization. Unauthorized disassembly may void your warranty and cause damage.
  • Ventilation: Ensure adequate ventilation around the computer case to prevent overheating. Blocked vents can lead to poor performance and component damage.
  • Physical Handling: Avoid forcibly compressing or deforming the case. This can damage the chassis and internal components.
  • Liquid Contact: Prevent liquids from entering the interior of the case. Liquids can cause short circuits and permanent damage to electronic components.

3. Product Overview & Features

The Dreamer PLUS case is engineered with several key features to provide an optimal building and user experience:

  • Panoramic View: Three-sided high-transparency tempered glass panels offer a full side-exposed 'sea view' for showcasing your build.
  • Extensive Compatibility: Supports ATX, MicroATX, and Mini-ITX motherboard form factors.
  • Cooling Performance: Designed for optimized thermal dissipation, supporting 360mm radiators for water cooling and up to 10 x 120mm fans for air cooling.
  • Component Clearance: Accommodates graphics cards up to 400mm in length and CPU coolers up to 157mm in height.
  • Storage Options: Features 2 HDD hard drive slots and 3 SSD hard drive slots for ample storage.
  • Dust Prevention: Equipped with a magnetic dust filter on the top and a pull-out dust filter at the bottom for easy cleaning and maintenance.
  • Rich Connectivity: Front panel includes HD Audio, USB 2.0, USB 3.0 ports, a Restart button, a Power switch, and an LED strip mode button.
  • ARGB Lighting: Supports 16.5 million color ARGB lighting effects, with a 'one-line connection' technology for synchronized control of multiple fan lights and speeds.
  • PWM Intelligent Temperature Control: Fans feature intelligent speed adjustment from 600-1800 RPM ±10%, regulating speed based on internal chassis heat to reduce noise (around 30.3 dBA max).
  • Hydraulic Bearing Fans: Ensures high-speed operation, reduced wear, low noise, and extended fan service life.
Icons representing key features: Tempered Glass, HDD+SSD support, ATX Motherboard support, Radiator Height Limit, GPU Length Limit, Dust Net.

Image: Visual representation of key features including tempered glass, storage support, motherboard compatibility, cooling limits, and dust filtration.

Side-by-side view of the Dreamer PLUS case in Pearl White and Starry Black.

Image: The Dreamer PLUS case is available in Pearl White and Starry Black.

4. Specifications

AttributeValue
Model NumberDreamer PLUS
Case Size (L*W*H)418mm * 280mm * 435mm
Case Weight8kg
MaterialSteel, Tempered glass, others
Chassis TypeDesktops
ApplicationDesktop
Form Factor SupportATX, MicroATX, Mini-ITX
Power Supply ModelATX
Power Supply MountedBottom
Side Panel WindowYes
RGB SupportSupports ARGB components (e.g., fans), case itself has no integrated RGB strips.
120mm Fan OptionsUp to 10
Max Radiator Size360mm
Max GPU Length400mm
Max CPU Cooler Height157mm
High-concerned chemicalNone
AttributeValue
Fan Size362(L)*120(W)*27mm(H)
Cooling MethodAir Cooling
Speed600-1800 RPM ±10%
Maximum Noise LevelMax. 30.3 dB(A)
Rated Voltage (Fan)12V DC
Working Current (Fan)0.66A
Wind Pressure1.59 mmH2O
Air Volume48.69 CFM
Bearing TypeHydraulic
Rated Voltage (Light)5V DC
Lighting Interface3-Pin
Power Interface4-Pin
Diagram showing component clearance limits for GPU, CPU cooler, PSU, and motherboard form factors.

Image: Component compatibility and size limits within the case.

5. Setup Instructions

  1. Preparation: Place the computer case on a stable, level surface to ensure proper balance and prevent accidental tipping.
  2. Component Installation:
    • Motherboard: Install your ATX, MicroATX, or Mini-ITX motherboard into the designated standoffs. Secure with screws.
    • CPU & Cooler: Install your CPU and CPU cooler (air or AIO liquid cooler). Ensure the CPU cooler height does not exceed 157mm.
    • Graphics Card (GPU): Install your graphics card(s) into the PCIe slots. The case supports up to 3 graphics cards with a maximum length of 400mm.
    • Storage Drives: Install your 2.5-inch SSDs into the 3 dedicated SSD slots and 3.5-inch HDDs into the 2 dedicated HDD slots.
    • Power Supply Unit (PSU): Install your ATX power supply in the bottom-mounted compartment. Ensure PSU length is within 140/160/200mm depending on configuration.
    • Fans/Radiators: Install additional 120mm fans or up to a 360mm radiator for water cooling as desired. Utilize the 'one-line connection' technology for simplified ARGB fan wiring.
  3. Cable Management: Route all power and data cables neatly behind the motherboard tray to ensure optimal airflow and a clean aesthetic.
  4. External Connections: Connect the power cord to the PSU and an electrical outlet. Connect your monitor, keyboard, mouse, and other peripherals.
  5. Power On: Press the Power switch on the front panel to start your system.
Diagram showing internal component clearance for CPU, GPU, and motherboard types.

Image: Internal layout and component installation areas.

Internal view showing HDD and SSD drive slots.

Image: Dedicated slots for HDD and SSD storage drives.

Close-up of the top panel interfaces including HD Audio, USB 2.0, USB 3.0, Reset, LED Mode, and Power buttons.

Image: Front panel interfaces for easy access.

6. Operating Instructions

  • Power On/Off: Use the dedicated Power switch on the front panel to turn the system on or off.
  • System Restart: Press the Reset button on the front panel to restart the system.
  • LED Lighting Control: Use the LED strip mode button on the front panel to cycle through various ARGB lighting effects and colors for compatible fans and components.
  • Fan Speed Control: The PWM intelligent temperature control automatically adjusts fan speeds (600-1800 RPM ±10%) based on internal temperatures to maintain optimal cooling and noise levels.
Image highlighting 16.5 million color ARGB lighting effects.

Image: Dynamic ARGB lighting effects.

7. Maintenance

  • Dust Filter Cleaning: Regularly clean the magnetic dust filter located on the top panel and the pull-out dust filter at the bottom. This prevents dust buildup, maintains optimal airflow, and prolongs component lifespan.
  • Interior Cleaning: Periodically clean the interior of the case using compressed air to remove dust from components. Ensure the system is powered off and unplugged before cleaning.
  • Ventilation Check: Ensure all case vents are unobstructed to allow for proper airflow and prevent overheating.
Image illustrating the magnetic top dust filter and pull-out bottom dust filter.

Image: Magnetic top and pull-out bottom dust filters for easy maintenance.

8. Troubleshooting

  • Unit fails to power on:
    • Check all power connections, including the power cord to the wall outlet and the PSU, and internal power cables to the motherboard and components.
    • Ensure the power switch on the PSU is in the 'ON' position.
  • Poor heat dissipation:
    • Clean all dust filters and internal components to improve airflow.
    • Verify that all fans are spinning correctly and are not obstructed.
    • Consider adding additional fans or upgrading your cooling solution if temperatures remain high.
  • Excessive noise:
    • Verify that all screws, especially those securing fans and side panels, are securely tightened. Loose screws can cause vibrations and noise.
    • Check fans for any obstructions or loose cables that might be hitting fan blades.
    • If a specific fan is noisy, it may need cleaning or replacement.

9. User Tips

  • Optimize Cable Management: Take advantage of the case's design for routing cables behind the motherboard tray. This not only improves aesthetics for the 'sea view' panels but also significantly enhances internal airflow, contributing to better cooling performance.
  • Component Compatibility Check: Before purchasing or installing components, always double-check their dimensions against the case's maximum supported lengths and heights for GPUs, CPU coolers, and PSUs to ensure a smooth build process.
  • Regular Dust Filter Cleaning: Make it a habit to regularly clean the magnetic top and pull-out bottom dust filters. This simple step is crucial for preventing dust buildup on your components, maintaining optimal thermal performance, and extending the lifespan of your hardware.
  • Leverage ARGB Sync: If using multiple ARGB components, utilize the 'one-line connection' feature to synchronize lighting effects across all compatible devices for a cohesive and visually stunning setup.

10. Warranty & Support

Warranty Period: This product comes with a 1-year warranty from the date of purchase.

For detailed instructions, diagrams, and further technical information, please refer to the official user manual PDF:

View User Manual (PDF)

For any support inquiries or warranty claims, please contact your retailer or the manufacturer directly with your proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.