HMX & Feker White Marble V3

Contents

HMX Feker White Marble V3 Hot-Swap Mechanical Keyboard Switches User Manual

Brand: HMX & Feker | Model: White Marble V3

1. Introduction

The HMX Feker White Marble V3 switches are hot-swappable mechanical keyboard switches designed for enthusiasts and DIY projects. These switches allow for quick and easy installation, assembly, and replacement without the need for soldering. They are compatible with mainstream PCB hot-swappable sockets and standard MX structure keycaps.

For a detailed PDF version of this manual, please refer to the official document: User Manual (PDF).

2. Product Features

  • Type: HIFI Linear switches, factory lubricated for smooth operation.
  • Compatibility: Designed for mechanical keyboards with hot-swappable PCBs, compatible with standard MX structure keycaps.
  • Design: Optimized shaft core bottoming area for an enhanced HIFI sound profile.
  • Materials:
    • Top Cover: PC
    • Shaft Core: POM
    • Base: PA66
  • Pin Configuration: 5-Pin design for secure mounting.
HMX & Feker White Marble V3 switches, showing top, side, bottom views.
Figure 1: Various views of the HMX & Feker White Marble V3 switches.
HMX & Feker White Marble V3 switch, highlighting HIFI Linear 42g.
Figure 2: HMX & Feker White Marble V3 switch, emphasizing its HIFI Linear 42g characteristics.
Diagram showing optimized shaft core bottoming area for HIFI sound.
Figure 3: Diagram illustrating the optimized shaft core bottoming area for enhanced HIFI sound.
HMX Feker White Marble V3 switches, emphasizing HIFI Linear shaft and POM material.
Figure 4: HMX Feker White Marble V3 switches, highlighting the HIFI Linear shaft and POM material construction.
Diagram of White Marble V3 switch components: PC top cover, POM shaft core, PA66 base.
Figure 5: Exploded view showing the components of the White Marble V3 switch: PC top cover, POM shaft core, and PA66 base.

3. Specifications

Attribute Detail
Product NameHMX Feker White Marble V3 Hot-Swap Switch
Axis Body BrandHMX Feker White Marble V3
Operation StyleMechanical
Pin Configuration5-Pin
Top Cover MaterialPC
Shaft Body TypeCross Linear Shaft
Shaft Core MaterialPOM
Base MaterialPA66
Initial Pressure30gf min
Conduction Pressure42gf ± 3 gf
Conduction Trigger Travel2.0mm ± 0.3mm
Bottoming Pressure47 gf ± 5 gf
Total Travel3.5mm ± 0.3mm
Spring20MM single stage
Lifespan50 million cycles
Execution StandardGB/TB14081-2010
High-concerned chemicalnone
CertificationCE, Dot, EAC, EPA, GMP, TGA, UL, pse
Detailed specifications table for Feker 42g Han White Jade Shaft (White Marble V3).
Figure 6: Detailed specifications for the Feker White Marble V3 switches.

4. Installation Preparation

Before installing the switches, ensure you have the necessary tools and a suitable environment.

4.1. Tools Required

  • Axle extraction tool (switch remover)
  • Dry soft cloth
  • Anti-static wrist strap (optional)

4.2. Environment

Perform installation in a dry, dust-free, and liquid-free area. Take precautions to avoid static electricity and prevent debris from falling into the keyboard.

4.3. Pre-Installation Inspection

  • Ensure that the pins of each key switch are intact and undamaged.
  • Disconnect the keyboard from its power supply.
  • Remove any USB/wireless receivers from the computer.

5. Installation Steps

  1. Determine the Correct Position: Align the switch with the keyboard's hot-swap socket. Ensure that all four corners of the switch are perfectly aligned with the positioning plate, and the pins are vertically aligned with the socket holes without any inclination.
  2. Smooth Insertion: Grasp both sides of the switch with your hands and apply even, downward force to press it into place. You should hear a "click" sound. Once the switch is fully inserted into the positioning plate and its pins are seated in the socket, installation is complete.
  3. Power-on Test: Connect the keyboard to its power supply. Press each key mechanism to confirm that key activation is normal, without any lag or consecutive clicks.
  4. Install Keycaps: After confirming proper switch function, attach the corresponding keycaps and gently press them into place.

6. Disassembly Steps

  1. Power Off: Ensure the keyboard is powered off. First, remove the keycaps.
  2. Insert Spliner: Insert the switch remover (spliner) into the shaft and secure the bottom of the switch.
  3. Vertical Pull: Pull up vertically with even force. Do not shake the switch left or right, or force the operation, as this can damage the switch socket and the PCB.
  4. Remove Switch: Carefully remove the switch. If there are no abnormalities in the switch seat, it is ready for reinstallation or replacement.

7. Important Notes

  • Installation and disassembly must always be performed with the keyboard powered off. Hot-plugging or hot-unplugging while powered on is strictly prohibited to prevent short circuits and circuit damage.
  • The pins of the switch are fragile. Do not bend or forcefully insert them. Any deviation can lead to failure to trigger or damage to the switch base.
  • Avoid pressing the shaft body's axis center forcefully to prevent damage to the internal structure.
  • Keep the switches away from liquids, dust, and high temperatures. Do not attempt to disassemble the switch yourself; doing so will void any normal operation guarantee.
  • If buttons do not respond or exhibit consecutive failures, remove and reinsert the keycap. Check if the pins are deformed or if any foreign objects are present in the keycap socket.

8. Troubleshooting (Common Questions)

Q: The buttons do not respond.
A: Check if the key mechanism is fully inserted, if the pins are aligned and inserted all the way in, and ensure the keyboard was powered off before operating.
Q: Experiencing pressing issues.
A: Ensure that the key mechanism is installed properly and that there are no foreign objects entering the shaft structure.
Q: How to remove a stuck switch?
A: Do not forcefully pull out the switch. Instead, use the extraction tool to firmly clamp it and then exert vertical and smooth force to remove it.
Incorrect installation example (red X) and correct installation example (green checkmark) for keyboard switches.
Figure 7: Illustration of incorrect (left) and correct (right) switch installation.

9. Safety & Warnings

WARNING: Failure to follow these instructions may result in damage to the product or personal injury.

  • Choking Hazard: Contains small parts. Not suitable for children under 3 years old. Be cautious of the risk of suffocation.
  • Always disconnect power before installing or removing switches to avoid short circuits.
  • This is an ESD (Electrostatic Discharge) sensitive device. Discharge static electricity before handling.
  • Do not attempt to disassemble the switch; internal springs and parts may eject and cause injury.
  • The product is not waterproof. Keep away from liquids to prevent electric shock.
  • This product is intended for use by persons 14 years of age or older. Children require adult supervision.
  • Dispose of the product as electronic waste according to local regulations.
  • Keep the device and its components out of reach of children under 3 years old.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow all installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries from sharp edges.
Warning symbol for children under 3 years (0-3 symbol).
Figure 8: Warning symbol indicating the product is not suitable for children under 3 years due to small parts.

10. User Tips

  • Users appreciate the nice sound profile and comfortable typing experience provided by these switches.
  • Ensure proper alignment during installation to fully benefit from the switch's performance and sound characteristics.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's official website or contact their customer service directly. Keep your purchase records for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.