Flytec V803 Pro Built-in Sonar Fish Finder GPS Bait Boat Instruction Manual

Introduction

Thank you for purchasing the Flytec V803 Pro GPS Bait Boat. This advanced remote-controlled bait boat is designed to enhance your fishing experience with intelligent features such as a built-in sonar fish finder, GPS positioning, and multiple bait compartments. Please read this manual thoroughly before operating the product to ensure safe and efficient use.

Package Contents

Please verify that all items listed below are included in your package:

Remote-controlled boat ×1
Boat battery (12000mAh) ×1
Antenna ×2
Remote control ×1
Fish finder remote control ×1
USB charging cable ×1
Type-C charging cable ×2
Remote control lanyard ×1
Fish finder lanyard ×1
Manual ×2 (Boat + Fish finder)
Sonar protective cover ×1
Car charger ×1
Spare propellers ×2

Flytec V803 Pro Package Contents — Image: All components included in the Flytec V803 Pro package.

Safety Precautions

General Use

Please read the manual in detail before use, and use the product under the guidance of the manual.
Children should use the product in the company of adults.
Do not use non-original spare parts without permission.

Lithium Battery Precautions

Do not mix new and old batteries or different types of batteries.
In case of battery damage or liquid leakage, please replace immediately. If skin or clothing comes into contact with battery liquid, wash immediately.
Do not overcharge the product battery. Once charging is complete or connected to the power supply, cover the power supply connecting compartment lid to prevent dust or water ingress.
Do not close to flammable objects or on the surface of flammable or conductive objects.
Do not charge it near flammable objects or on the surface of flammable or conductive objects, and observe the charging situation at any time when charging.

Safety Instructions and Battery Precautions — Image: Important safety instructions and lithium battery precautions.

Setup

1. Battery Installation

The bait boat uses a dual power supply system. Ensure both 12000mAh batteries are fully charged before installation.

Open the battery compartments on the boat.
Insert the charged 12000mAh batteries, ensuring correct polarity.
Connect the dual power cables to the batteries.
Securely close the battery compartment lids.

The remote control requires a 3.7V 1200mAh battery. Install it into the remote control's battery compartment.

Dual Power Supply for Bait Boat — Image: Illustration of connecting two 12000mAh batteries for dual power supply.

2. Antenna Installation

Attach the two antennas to their designated ports on the bait boat. These dual-gain antennas enhance signal reception.

Video: Product demonstration showing features like remote control display, dual antenna, carrying handle, battery level, night lights, dual battery, bait bins, sonar, navigation, speed, and GPS positioning.

3. Initial Charging

Before first use, fully charge the boat batteries, remote control battery, and fish finder remote control battery using the provided charging cables and car charger.

**Hull Battery:** Charging time for 12000mAh is approximately 8 hours.
**Remote Control Battery:** The remote control battery is 3.7V 1200mAh.
**Fish Finder Remote Control Battery:** Charge using the dedicated Type-C cable.

Charging Indicators for Boat, Remote, and Fish Finder — Image: Visual guide for charging indicators on the hull battery, remote control, and fish finder remote control.

Operating Instructions

1. Power On/Off

**Boat:** Press the power button on the boat's hull to turn it on. The battery indicator will light up.
**Remote Control:** Press and hold the power button on the remote control for 3 seconds to turn it on. The color on-screen display will activate.
**Fish Finder Remote Control:** Press the power/menu key to turn it on.

Remote Control Display and Battery Indicator — Image: High-Definition Color Screen and Key Backlight on Remote Control, showing battery indicators and low power warnings.

2. Remote Control Overview

Familiarize yourself with the remote control buttons:

Remote Control Button Details — Image: Detailed diagram of the remote control buttons, including Cruise, Calibration, Fishing Ground, Cursor Left/Right, Speed Switching, Granary, Origin, Clear, Light, OK, and Switching.

**Joystick:** Controls forward, backward, left, and right movement.
**Cruise Button:** Activates cruise control.
**Calibration Button:** Initiates GPS calibration.
**Fishing Ground Button:** Accesses fishing spot memory.
**Cursor Left/Right:** Navigates menus or adjusts settings.
**Speed Switching:** Toggles between two speed modes.
**Granary Button:** Controls bait bin release.
**Origin Button:** Sets or returns to the origin point.
**Clear Button:** Clears settings or data.
**Light Button:** Controls boat lights.
**OK Button:** Confirms selections.
**Switching Button:** Power on/off.

3. Navigation and Speed Control

Use the joystick for manual control: push forward for forward, pull back for backward, left for left turn, right for right turn.
The boat features a dual-drive system with two-speed gear shifting. Press the 'Speed Switching' button to toggle between First Gear (slow) and Second Gear (fast).
The high-precision gyroscope automatically corrects yaw for stable navigation.

Dual Speed Mode Illustration — Image: Visual representation of the dual speed mode, showing the boat operating at 'Fast' and 'Slow' speeds.

4. Bait Deployment

The boat has four independently controllable bait bins. Load your desired bait (e.g., mixed bait, corn kernels, pellet bait) into the bins.

Use the 'Granary' button on the remote control to open and close the bins individually or in sequence (Bin 1, 2, 3, 4).
The rear bin can also be used with hooks for spot casting.

Separate Control of Four Bait Bins — Image: Diagram showing the separate control of four bait bins and their selection order.

Large Load Capacity and Bait Types — Image: Illustrates the 3KG large load capacity and examples of suitable bait types: Mixed Bait, Corn Kernels, and Pellet Bait.

5. GPS Positioning and Navigation

**Beidou Intelligent Calibration System:** The built-in Beidou positioning system allows for intelligent position calibration and accurate positioning.
**Fishing Spots:** You can set up to 4 fishing areas and 160 fishing points. Use the 'Fishing Ground' button to manage these points.
**Cruise Control:** Activate cruise control for straight-line travel at a constant speed.
**Point-to-Point Navigation:** Set multiple points for automatic navigation between them, enhancing fishing efficiency.

Precise Positioning and Memory of Fishing Spots — Image: Diagram showing Beidou + GPS Dual-Mode Positioning, allowing for 4 fishing grounds and 200 positioning points.

6. Smart Return-to-Home Function

The boat is equipped with intelligent return-to-home features for safety:

**GPS One-Button Return:** Press the designated button on the remote to return the boat to its starting point.
**Automatic Return:** The boat will automatically return if:

Battery is low.
Communication is lost.
It exceeds the navigation range (Electronic Fence Function).

Smart Return Features — Image: Illustration of Smart Return features including one-click return, low battery return, and lost signal return.

Image: Demonstrates the Electronic Fence Function, setting a 500-meter safety range for automatic return.

7. Sonar Fish Finder Operation

The built-in sonar fish finder provides real-time underwater information:

The fish finder remote control displays water depth, water temperature, terrain, and fish size/depth.
It has a 500-meter detection range, 100-meter detection depth, and a 90-degree detection angle.
The sonar frequency is 125 kHz/200 kHz.
The fish alarm feature can be customized to detect different fish sizes.

Integrated Sonar Fish Finder — Image: Diagram illustrating the integrated sonar fish finder's capabilities, including 90-degree sonar angle, 100m detection depth, and 500m detection distance.

Multi-Dimensional Detection on Fish Finder — Image: Fish finder display showing multi-dimensional detection of water depth, water temperature, terrain, and fish size/depth.

Intelligent Identification of Underwater Features — Image: Illustrates intelligent identification of big fish, small fish, reefs, and water plants for a clear view of the underwater situation.

Fish Alarm Feature — Image: Explains the customizable fish alarm mode, sensitive to different fish sizes, with an audible beep when fish are detected.

8. Multi-Function Lighting System

The boat is equipped with various lights for visibility and functionality:

**High-brightness night navigation lights:** Located at the bow for safer nighttime navigation.
**Stern turn signal lights:** Clearly indicate the direction of travel.
**Lighting Modes:** Two modes are available: constant on and flashing, adaptable to different environmental needs.

Boat Hull Part Description — Image: Diagram showing the boat hull parts, including headlights and stern lights.

9. Fishing Modes

The V803 Pro supports four distinct fishing modes:

**Normal Mode:** For general detection, applicable for depths of 4-100 meters.
**Shallow Water Mode:** Suitable for detecting in flat areas such as ponds, reservoirs, and banks within a depth of 4 meters.
**Bank Fishing Mode:** Suitable for detecting on the slope near the banks of ponds and reservoirs. The depth can vary significantly with the movement of the probe, and the depth displayed is relatively shallow.
**Sea Fishing Mode:** Suitable for detection in large seas with significant wave fluctuations. The minimum detection depth is 1.5 meters, and the sensitivity to underwater fish is low (especially in areas with reefs).

Four Fishing Modes — Image: Visual guide to the four available fishing modes: Normal, Shallow Water, Bank Fishing, and Sea Fishing.

10. Hook Line Delivery Function

The boat supports hook line release for precise hook deployment, enhancing fishing success rates. Utilize the tail hook structure for this purpose.

11. GPS Electronic Anchor

The virtual anchoring system uses precise satellite positioning technology (GPS/Beidou modules) to monitor the boat's real-time position. If the bait boat moves beyond a pre-set point, the system automatically triggers an alarm or controls the motor to return, effectively creating a 'virtual anchor'.

Maintenance

1. Cleaning

After each use, especially in saltwater, rinse the boat with fresh water to remove salt, dirt, and debris.
Ensure all compartments are dry before storage.
Wipe the remote controls with a soft, dry cloth.

2. Battery Care

Always fully charge batteries before storage if not used for an extended period.
Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
Periodically check batteries for any signs of swelling or damage.

3. Propeller Inspection

Regularly inspect the propellers for any entanglement (e.g., fishing lines, weeds) or damage.
Clean any debris from the propellers to ensure optimal performance. Replace damaged propellers with the provided spares.

Troubleshooting

Boat Not Responding

Check if both the boat and remote control are powered on.
Ensure batteries in both the boat and remote control are sufficiently charged.
Verify that the remote control is within the 500-meter operating range.
Check for any physical obstructions or damage to the propellers.

Low Battery Alerts

**Boat:** When the boat is in a low power state, the front light flashes, the stern light flashes red, and the remote control emits a fast 'di-di' sound. Return the boat to shore immediately for charging.
**Remote Control:** When the remote control itself is low on battery, it will make a 'di-di' sound. Charge the remote control.

GPS/Positioning Issues

Ensure the boat has a clear view of the sky for optimal satellite signal reception.
Perform GPS calibration if positioning seems inaccurate.

Fish Finder Not Detecting

Ensure the fish finder remote control is powered on and properly connected.
Check if the sonar sensor is clean and free from obstructions.
Verify that the boat is in water deep enough for sonar operation (minimum 1.5m for sea fishing mode).

Specifications

Feature	Specification
Brand Model	V803 Pro
Material	ABS Plastic + Electronic Components
Colour	Carbon Fibre Colour
Suitable Age	14 years and above
Product Dimensions	55 × 26.8 × 20 cm (21.65 × 10.55 × 7.87 inches)
Net Weight	2821g (approx. 6.22 lbs)
Load Capacity	3 KG (6 pounds)
Boat Battery Capacity	12000mAh × 2 (Dual Power Supply)
Boat Battery Life	4 hours (with 12000mAh batteries)
Boat Charging Time	8 hours (with 12000mAh batteries)
Remote Control Battery	3.7V 1200mAh
Maximum Speed	250 metres/minute
Remote Control Range	500 metres
Drive System	Dual drive, 2-speed gear shifting
Number of Bait Bins	4 (Independently controllable)
Number of Positioning Points	200
Fish Finder Parameters
Detection Range	500 metres
Detection Depth	100 metres
Detection Angle	90°
Sonar Frequency	125 kHz/200 kHz
Operating Time (Fish Finder)	10 hours

Product Information Table — Image: Comprehensive product information table including dimensions, weight, battery, speed, and fish finder specifications.

Boat Size Diagram — Image: Diagram illustrating the boat's dimensions: 55cm (length), 26.8cm (width), and 20cm (height).

User Tips

Always check the battery levels of both the boat and remote controls before heading out for fishing to avoid unexpected power loss.
Familiarize yourself with the GPS positioning and fishing spot memory functions in a calm environment before using them in active fishing scenarios.
Experiment with different fishing modes (Normal, Shallow Water, Bank Fishing, Sea Fishing) to understand their optimal use cases for your specific fishing environment.
Utilize the dual-gain antennas for maximum signal range, especially when operating at longer distances.

Warranty and Support

For any product inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact details and warranty terms.

Flytec V803 Pro