DykbRadio BP1048B1

Contents

DykbRadio BP1048B1 Bluetooth 5.3 DSP Tuning Amplifier Board User Manual

Model: BP1048B1

1. Introduction

The DykbRadio BP1048B1 is an advanced DSP audio amplifier board designed for DIY enthusiasts. Featuring the TPA3116 power chip and Bluetooth 5.3 connectivity, it offers comprehensive 20-band EQ adjustment, multiple sound effects, and real-time PC tuning capabilities. This compact board is ideal for upgrading existing audio systems or building new DIY speaker projects, including car audio and portable speakers. It also supports TWS (True Wireless Stereo) pairing for a richer stereo experience.

Note: This product is recommended for users with DIY experience. A power supply is not included. For TWS stereo functionality, two units must be purchased.

2. Safety Warnings and Precautions

2.1. Safety Warning

  • WARNING: Stay away from children and avoid misoperation.
  • WARNING: Please do not disassemble or modify this product by yourself. Non-professional repairs may cause damage or safety accidents.

2.2. Precautions

  • Do not use the device in damp or dusty environments.
  • Avoid severe impact or vibration on the product.

3. Package Contents

Upon unboxing, please verify that all accessories are present and in good condition.

  • DSP1048B1 amplifier board
  • External Bluetooth antenna
  • Pin headers for connections
  • Button panel with connecting cable
BP1048B1 amplifier board and included accessories
Figure 1: BP1048B1 amplifier board with external antenna, pin headers, and button panel.

4. Setup and Wiring

Careful wiring is crucial for optimal performance and safety. Refer to the wiring diagram below for connections.

Wiring diagram for BP1048B1 amplifier board showing power, speaker, AUX, and button connections.
Figure 2: Wiring Diagram. Connect DC 12V-24V power, right and left speakers, AUX input, and the button panel. The Tuning port is for PC connection.

4.1. Power Connection

Connect a DC 12V-24V power supply (≥3A recommended) to the designated power input terminals on the board. Ensure correct polarity (+ and -).

4.2. Speaker Connection

Connect your right and left speakers to the corresponding output terminals (R+ R- and L+ L-). Ensure proper speaker impedance compatibility with the amplifier.

4.3. AUX Input

For wired audio input, connect your audio source to the AUX input terminals.

4.4. Button Panel Connection

Connect the provided button panel to the designated header on the amplifier board. This panel provides control over various functions.

4.5. PC Tuning Connection

For real-time DSP tuning, connect the board to a computer using a Type-C USB cable to the 'Tuning' port.

Video 1: Demonstration of the BP1048B1 amplifier board connected to speakers and a laptop, playing music.

5. Operating Instructions

5.1. Basic Operation (Button Functions)

The connected button panel allows control over the amplifier's functions:

  • K1 Button:
    • Short press: Cycle through EQ presets.
    • Long press: Switch between input modes (e.g., Bluetooth, AUX, USB Audio).
    • Double press: Initiate TWS connect/disconnect (if two units are present).
  • K2 Button:
    • Short press: Decrease volume.
    • Long press: Go to the previous track.
  • K3 Button:
    • Short press: Play/Pause audio.
  • K5 Button:
    • Short press: Increase volume.
    • Long press: Go to the next track.

5.2. Bluetooth Connectivity

  1. Ensure the amplifier board is powered on and in Bluetooth mode (use K1 long press to switch modes if necessary).
  2. On your audio device (smartphone, tablet, etc.), search for Bluetooth devices.
  3. Select the amplifier board's Bluetooth name (usually 'BP1048B1' or similar) to pair. A confirmation sound may be heard.

5.3. TWS (True Wireless Stereo) Pairing

If you have two BP1048B1 units, you can pair them for a stereo sound experience:

  1. Power on both amplifier boards.
  2. Ensure both boards are in Bluetooth mode.
  3. On one of the boards, double-press the K1 button to initiate TWS pairing. The boards will attempt to connect to each other.
  4. Once paired, connect your audio device to the primary board via Bluetooth. Audio will then play in stereo across both units.

5.4. USB Audio Input

Connect the amplifier board to a computer via the Type-C USB port. The board will be recognized as a USB audio device (plug-and-play), allowing audio playback directly from your computer.

5.5. DSP Tuning Software

The BP1048B1 features a powerful DSP for audio customization. You can fine-tune the sound using the dedicated PC software:

  1. Download the tuning software from: http://115.28.16.44:81/file/655-B1.rar
  2. Install the software on your Windows PC.
  3. Connect the amplifier board to your PC via the Type-C 'Tuning' port.
  4. Launch the software to access features like 20-band parametric EQ, bass enhancement, vocal boost, dynamic range compression (DRC), 3D sound, frequency shift/low-cut, and surround enhancement.
  5. Adjust settings in real-time and save them to the board's memory.
Screenshot of the PC tuning software interface for the BP1048B1 amplifier board, showing various audio effects and a 'Save Flash Result' popup.
Figure 3: PC Tuning Software Interface. Allows detailed adjustment of audio parameters.

6. Technical Specifications

FeatureSpecification
Model NumberBP1048B1
Brand NameDykbRadio
ChipsetBP1048b1 + TPA3116 Class-D
Power Output50W x 2
Power SupplyDC 12V-24V, ≥3A (battery compatible)
Bluetooth Version5.3 (AAC/SBC codec support)
DSP Processing20-band parametric EQ, bass enhancement, vocal boost, DRC, 3D sound, frequency shift/low-cut, surround enhancement
EQ Control20-band fully adjustable + 3 custom presets
InputsBluetooth, USB audio (plug-and-play), AUX
TWS FunctionYes (requires two units)
Tuning InterfaceType-C USB for PC software
Dimensions69 × 43 × 18 mm
ConnectivityExternal antenna, status LED, mute function
DIY Supplies CategoryElectrical
CertificationNONE

7. Maintenance

  • Keep the amplifier board clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
  • Ensure proper ventilation around the board, especially during extended use, to prevent overheating.

8. Troubleshooting

8.1. No Sound Output

  • Check power supply connection and ensure it meets the 12V-24V DC, ≥3A requirement.
  • Verify speaker connections are secure and correctly polarized.
  • Ensure the correct input mode is selected (Bluetooth, AUX, USB Audio) using the K1 button.
  • Check volume levels on both the amplifier and the audio source device.

8.2. Bluetooth Connection Issues

  • Ensure the amplifier is in Bluetooth mode.
  • Make sure the external Bluetooth antenna is properly connected.
  • Try unpairing and re-pairing the device from your audio source's Bluetooth settings.
  • Ensure no other devices are actively connected to the amplifier.

8.3. TWS Pairing Failure

  • Ensure both units are powered on and in Bluetooth mode.
  • Perform the double-press K1 action on one unit to initiate pairing.
  • Ensure the units are within close proximity during pairing.

8.4. Sound Quality Issues / DSP Tuning Problems

  • If experiencing unexpected sound quality, connect the board to a PC and use the tuning software to reset or adjust EQ and sound effects.
  • Ensure the tuning software is the correct version for your board.

9. User Tips

  • Experiment with EQ: The 20-band EQ offers extensive customization. Take time to experiment with different settings using the PC software to find the sound profile that best suits your speakers and listening preferences.
  • Power Supply Quality: Using a stable and clean power supply (e.g., a good quality DC adapter or battery pack) can significantly impact audio performance and reduce noise.
  • Antenna Placement: For optimal Bluetooth range and stability, ensure the external antenna is positioned away from metal obstructions.
  • TWS Setup: When setting up TWS, ensure both boards are powered on and in close proximity before initiating the pairing process. This helps establish a stable stereo connection.

10. Warranty and Support

For technical support, troubleshooting assistance, or warranty inquiries, please contact the seller or manufacturer directly. Refer to the original purchase documentation for specific warranty terms and contact information.

An additional user manual in PDF format, containing basic instructions and warnings, can be found here.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.