WJCOOLMAN AITO Plus

Contents

WJCOOLMAN AITO Plus ATX PC Case

Instruction Manual

1. Product Overview

The WJCOOLMAN AITO Plus is a high-performance ATX PC case designed for enthusiasts and gamers. It features a pillarless curved glass design, offering an unobstructed view of your internal components. Available in both standard and secondary screen versions, it supports extensive cooling solutions and a wide range of hardware configurations.

Video: Demonstration of the WJCOOLMAN AITO Plus PC Case with various RGB lighting effects.

Key Features:

  • Curved glass panel for panoramic view.
  • Side suction radiator cooling support.
  • Compatibility with ATX, Micro-ATX, and ITX motherboards.
  • Support for graphics cards up to 420mm in length.
  • CPU cooler height limit of 165mm.
  • Supports up to 8 x 120mm fans for optimal airflow.
  • Optional 9.16-inch software screen for hardware monitoring and custom interaction.
  • Integrated RGB light strip and cool lighting foot base.
  • Magnetic dustproof net at the bottom for easy maintenance.
  • Tool-free assembly and disassembly for convenience.
Feature Introduction: Curved glass, Side Suction Radiator Cooling, Supports ATX/M-ATX/ITX, Graphics card length limit 420MM, Heatsink height limit 165MM, Supports 120MM*8 fans.

Image: Overview of key features including curved glass, cooling support, and component compatibility.

2. Setup and Installation

This section guides you through the process of installing your components into the AITO Plus PC case. Ensure all power is disconnected before beginning installation.

2.1 Preparing the Case

The AITO Plus case features quick disassembly for easy access. The side and top panels can be removed without tools, often secured by magnetic adsorption or simple latches.

Exploded view of the PC case showing removable panels for easy assembly.

Image: Exploded view demonstrating tool-free panel removal for simplified installation.

2.2 Motherboard Installation

The case supports ATX, Micro-ATX, and ITX motherboards. Install the motherboard into the designated area, ensuring proper alignment with the standoffs.

Diagram showing motherboard compatibility and installation area for ATX, Micro-ATX, and ITX motherboards.

Image: Motherboard compatibility and layout for various form factors.

2.3 Power Supply Installation

The case supports 140-160mm ATX power supplies. Install the power supply in its dedicated compartment, typically at the rear or bottom of the case, ensuring all cables can reach their respective components.

Internal view of the PC case highlighting the power supply unit installation area.

Image: Internal layout showing the power supply installation area (140-160mm).

2.4 Drive Installation

The AITO Plus offers flexible storage options:

  • 2 x 3.5-inch HDD slots
  • 3 x 2.5-inch SSD slots

Utilize the hard drive rack for flexible expansion and neatly arrange your storage devices.

Diagram illustrating the HDD and SSD drive bay locations within the PC case.

Image: HDD and SSD installation points for high-speed and large-capacity storage.

2.5 Cooling System Installation

The case supports extensive air and water cooling configurations:

  • Front of Motherboard: Supports 3 x 120mm fans (compatible with a 360mm water cooling radiator).
  • Rear: Supports 2 x 120mm fans.
  • Bottom Panel: Supports 3 x 120mm fans.

Ensure proper fan orientation for optimal airflow. The side suction radiator cooling design enhances thermal performance.

Diagram showing fan placement and airflow within the PC case, highlighting eight fan positions.

Image: Fan wind control and placement for efficient cooling.

2.6 Graphics Card Installation

The case supports graphics cards up to 420mm in length. Install your graphics card into the appropriate PCIe slot. The case provides 7 PCIe slots for expansion.

Diagram indicating the maximum supported length for graphics cards (420mm) and CPU cooler height (165mm).

Image: Graphics card length and CPU cooler height limits.

2.7 Front Panel Connections

Connect the front panel cables to your motherboard. The side-mounted panel interface includes:

  • HD Audio
  • 2 x USB 3.0 ports
  • 1 x Type-C port
  • Power switch
  • Restart button
Close-up of the front panel interfaces including USB 3.0, Type-C, audio jacks, and power/reset buttons.

Image: High-speed interface for smooth connection and user-friendly design.

3. Operating Instructions

3.1 Powering On/Off

Press the power button located on the front panel to turn your system on or off. A short press typically initiates power-on, while a longer press (usually 4-5 seconds) will force a shutdown.

3.2 RGB Lighting Control

The AITO Plus case features integrated RGB lighting. Control of the RGB lighting, including colors and effects, is typically managed through your motherboard's RGB software or a dedicated RGB controller (if included with your fans/accessories). Refer to your motherboard or RGB controller manual for specific instructions.

3.3 Secondary Software Screen (Optional)

If you have the secondary screen version, this 9.16-inch display visualizes hardware status, parameters, or custom interactions. To utilize this feature, you will need to install the appropriate control software.

Software Download: The screen control software can be downloaded from https://theme.hlinel.com/?download/.

Close-up of the 9.16-inch software screen displaying hardware status within the PC case.

Image: The 9.16-inch software screen displaying hardware information.

4. Maintenance

4.1 Dust Filter Cleaning

The AITO Plus case is equipped with a magnetic dustproof net at the bottom. Regularly remove and clean this filter to prevent dust buildup and maintain optimal airflow. Simply detach the magnetic filter, clean it with water or a soft brush, and reattach once dry.

Image showing the magnetic dust filter and mesh side panel for heat dissipation.

Image: Magnetic dust filter and mesh side panel for efficient heat dissipation.

4.2 General Cleaning

To clean the exterior of the case, including the curved glass panels, use a soft, lint-free cloth. For stubborn smudges, a slightly damp cloth with a mild, non-abrasive cleaner can be used. Avoid harsh chemicals or abrasive materials that could scratch the surfaces.

5. Troubleshooting

5.1 System Not Powering On

  • Ensure the power supply is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
  • Verify all power cables from the PSU are securely connected to the motherboard, CPU, and graphics card.
  • Check that the front panel power switch cable is correctly connected to the motherboard's header.

5.2 Fans Not Spinning / RGB Not Lighting Up

  • Confirm that all fan power cables are securely connected to the motherboard or fan controller.
  • For RGB lighting, ensure RGB cables are correctly connected to the motherboard's RGB headers or a dedicated RGB controller.
  • Check your motherboard's BIOS/UEFI settings or dedicated RGB software to ensure fans and lighting are enabled and configured correctly.

5.3 Secondary Screen Not Displaying (Optional)

  • Ensure the screen's power and data cables are properly connected.
  • Verify that the screen control software is installed and running on your operating system.
  • Check for any driver updates for the secondary screen from the manufacturer's website.

6. Specifications

Feature Specification
Model Number AITO Plus
Chassis Size (L*W*H) 447mm * 285mm * 465mm
Hardware Dimensions (L*W*H) 447mm * 285mm * 448mm
Case Weight 11kg
Type Horizontal
Form Factor Compatibility ATX, MicroATX, ITX
Material STEEL, Tempered glass, others (SPCC steel plate + tempered glass)
Power Supply Support 140/160mm ATX Power Supply (No power supply included)
CPU Cooler Height Limit 165mm
Graphics Card Length Support Up to 420mm
Internal 3.5" Drive Bays 2
Internal 2.5" Drive Bays 3
PCIE Support 7 slots available
Panel Interface Side-mounted HD Audio + 2x USB 3.0 + 1x Type-C
Air/Water Cooling System Front: 3x 120mm fans (360mm radiator compatible); Rear: 2x 120mm fans; Bottom: 3x 120mm fans
With Side Panel Window Yes
RGB Support RGB
Origin Mainland China

7. User Tips

  • Case Only: Please note that the WJCOOLMAN AITO Plus PC case is sold as a standalone chassis. All internal components, including the cooling system, fans, power supply, motherboard, CPU, GPU, and storage drives, must be purchased separately.
  • Secondary Screen: If you desire the 9.16-inch software screen feature, ensure you select the 'secondary screen version' of the case, as the standard edition does not include it.
  • Cable Management: Take advantage of the case's design for neat hardware layout and cable management. Proper cable routing improves airflow and aesthetics.
  • Airflow Optimization: Pay attention to fan placement and direction to create an efficient airflow path, especially with the side suction radiator cooling and multiple fan positions.

8. Warranty and Support

For any technical assistance, warranty claims, or support inquiries regarding your WJCOOLMAN AITO Plus PC Case, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

For software related to the optional secondary screen, please visit the official download page: https://theme.hlinel.com/.

© 2024 WJCOOLMAN. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.