SmallRig 5955 / 5956

Contents

SmallRig Basic Handheld Camera Cage Kit

For Canon EOS R6 Mark III / R6 Mark II (Models 5955 / 5956)

Introduction

The SmallRig Basic Handheld Camera Cage Kit is designed to enhance the stability, portability, and accessory expansion capabilities for your Canon EOS R6 Mark III or R6 Mark II camera. This kit provides comprehensive protection and a versatile mounting platform for various shooting scenarios, including handheld, low-angle, and tripod photography.

Key features include an ergonomic top handle with silicone padding for comfortable use, a secure HDMI & USB-C cable clamp to prevent signal interruptions, and multiple mounting interfaces for accessories. The integrated Arca-Swiss quick release baseplate allows for quick transitions between tripods and DJI RS series gimbals.

What's in the Box

The contents of your kit may vary slightly depending on the specific model (5955 or 5956) purchased.

Model ID: 5955

Contents of SmallRig Cage Kit 5955, showing a camera cage, cable clamp, top handle, and operating instruction.

Image: Components of the SmallRig Cage Kit 5955.

  • Cage × 1
  • Cable Clamp × 1
  • Top Handle × 1
  • Operating Instruction × 1

Model ID: 5956

Contents of SmallRig Cage Kit 5956, showing a camera cage, cable clamp, top handle, side handle, and operating instruction.

Image: Components of the SmallRig Cage Kit 5956.

  • Cable Clamp × 1
  • Top Handle × 1
  • Side Handle × 1
  • Operating Instruction × 1

Setup Instructions

  1. Prepare the Camera Cage: Before mounting, remove the side locating blocks on both sides of the cage. These blocks are designed to be adjustable for a snug fit.

  2. Attach the Camera: Place your Canon EOS R6 Mark III or R6 Mark II camera into the cage. Secure the camera using the bottom 1/4"-20 screw. Ensure the dual side locating blocks are properly aligned and tightened to prevent rotation. The built-in silicone pads will protect your camera from scratches.

    Diagram showing the three-point locking system of the camera cage with a bottom screw and side locating blocks.

    Image: Illustration of the three-point locking system for secure camera attachment.

  3. Install the Top Handle (if included): Attach the ergonomic top handle to the NATO rail on the top of the cage. Ensure it is securely fastened for a comfortable and stable grip during handheld shooting.

    Person holding a camera with the SmallRig top handle attached, highlighting the ergonomic design.

    Image: Demonstrates the ergonomic top handle in use.

  4. Attach the Cable Clamp: Position the HDMI & USB-C cable clamp to secure your camera's cables. Fasten it with the single thumbscrew to prevent accidental disconnections and ensure stable signal transmission.

    Close-up of the cable clamp securing HDMI and USB-C cables to the camera cage.

    Image: The cable clamp securing HDMI and USB-C cables.

  5. Mounting on Tripods/Gimbals (Arca-Swiss Quick Release): The bottom of the cage features an integrated Arca-Swiss quick release plate. This allows for direct mounting onto Arca-type tripods (e.g., ID 4060, 4353) and DJI RS 2, RSC 2, RS 3, RS 3 Mini, RS 3 Pro, RS 4, and RS 4 Pro gimbals. This facilitates quick and seamless transitions between different shooting setups.

    Diagram showing the quick switch system, with the camera cage being moved between a gimbal and a tripod using an Arca-Swiss quick release plate.

    Image: Demonstrates the quick switch capability between gimbal and tripod using the Arca-Swiss plate.

    Two images showing the HawkLock Quick Release System. One shows an integrated Arca-Swiss quick release plate, and the other shows a hand assembling a camera rig quickly.

    Image: The HawkLock Quick Release System for fast rig assembly.

Operating Instructions

Once the camera is securely mounted in the cage and necessary accessories are attached, you can utilize the various features for enhanced shooting:

  • Handheld Shooting: Use the ergonomic top handle (and side handle if applicable to your kit) for stable and comfortable handheld operation. The silicone padding provides a non-slip grip.

  • Accessory Mounting: The cage offers numerous mounting points for additional accessories:

    • 1/4"-20 threaded holes
    • 1/4"-20 locating holes
    • 3/8"-16 threaded holes
    • ARRI 3/8"-16 locating holes
    • Cold shoe mount
    • HawkLock quick release NATO rails (on top and left)
    • QD interfaces
    • Strap slots

    These interfaces allow you to attach monitors, microphones, lights, follow focus systems, and other gear to customize your rig.

    Diagram showing various mounting points on the SmallRig camera cage, including 1/4-20, 3/8-16, ARRI, cold shoe, NATO rail, QD socket, and strap slot.

    Image: Overview of comprehensive protection and 3-point locking system with various mounting options.

    A camera rig with a monitor attached to the cage via a monitor mount (ID: 2903B).

    Image: Example of a recommended attachment, a monitor mount.

  • Versatile Shooting Scenes: The kit supports various photography and videography styles.

    Three images depicting different photography scenes: handheld, low-angle, and tripod photography using the camera cage.

    Image: Examples of handheld, low-angle, and tripod photography setups.

Maintenance

  • Cleaning: Wipe the aluminum alloy components with a soft, dry cloth to remove dust and fingerprints. For stubborn dirt, use a slightly damp cloth and dry immediately.
  • Silicone Pads: Ensure the silicone pads remain clean and free of debris to maintain optimal grip and camera protection.
  • Storage: Store the cage kit in a dry, cool place away from direct sunlight and extreme temperatures when not in use.
  • Inspection: Periodically check all screws and connections to ensure they are tight and secure.

Troubleshooting

  • Camera not fitting securely: Ensure the side locating blocks were removed before mounting the camera. Re-adjust and tighten the 1/4"-20 bottom screw and side blocks for a snug fit.

  • Incompatibility with DJI RS 4 Mini: Please note that this cage kit is not compatible with the DJI RS 4 Mini gimbal.

  • Cable clamp issue with Canon R6 Mark II (Model 5955): When using Cage 5955 with the Canon R6 Mark II, the included cable clamp may be incompatible. In this specific configuration, please purchase cable clamp 2981B separately for proper cable management.

Specifications

Attribute Detail
Product Dimensions 218.7 × 135.0 × 183.1mm / 8.6 × 5.3 × 7.2in
Product Weight 484.0 + 5.0g / 17.1 + 0.2oz
Package Dimensions 184.0 × 180.5 × 80.0mm / 7.2 × 7.1 × 3.1in
Package Weight 608.0 + 5.0g / 21.4 + 0.2oz
Material(s) Aluminum Alloy
Cage Type Camera Cage
Configured For Cameras
Compatibility Canon EOS R6 Mark III, Canon EOS R6 Mark II, Canon EOS R5 II, Canon EOS R5 Mark II
Model Numbers 5955, 5956

User Tips

  • Users report improved grip comfort and increased mounting options, making the kit an excellent solution for enhancing camera handling.
  • The cage fits the R6 Mark III perfectly, providing a secure and stable platform.

Warranty and Support

SmallRig products are designed for durability and performance. For any questions regarding product functionality, assembly, or troubleshooting not covered in this manual, please contact SmallRig customer support. Keep your purchase receipt for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.