1. Introduction
The JIKONG JK BMS B1A8S10P is a smart, active balanced Battery Management System designed for large capacity series-connected lithium battery packs. It is suitable for power lithium batteries, storage lithium batteries, and outdoor battery applications. This BMS provides comprehensive protection and management for LiFePO4, Li-ion, and LTO battery types, supporting configurations from 4S to 8S (12V to 24V systems).
Key features include high-precision voltage and current acquisition, active balancing, and various communication interfaces for monitoring and control.
1.1 Application Scenarios
This BMS is widely applicable in various scenarios, including:
- E-bikes
- Electric Tricycles
- Low Speed Quads
- Forklifts
- Cleaning Cars
- Tourist Cars
- Industrial Drones
- Scooters
- RV Energy Storage
- General Lithium Battery applications
- Power Banks
- Storage Batteries
2. Specifications
The JIKONG JK BMS B1A8S10P offers robust performance and features for battery management.
| Feature | Specification |
|---|---|
| Model | JK-B1A8S10P-HCR (Standard) / JK-B1A8S10P |
| Balance Method | Active Balance |
| Balance Current | 1A |
| Charge/Discharge Current | 100A |
| Maximum Instantaneous Current | 200A |
| Battery Strings (Li-ion/LiFePO4/LTO) | 4S-8S |
| Working Voltage Range | 10-36V |
| Conductive Resistance in Main Circuit | 0.8mΩ |
| Over Charge Protection Current | 10-100A |
| Interface | BT (Built-in), LCD Switch, Sampling/Temp. |
| RS485 Interface | Support (Optional for JK-B1A8S10P) |
| CANBUS Interface | Support (Optional for JK-B1A8S10P) |
| Battery Heating | Support (Optional for JK-B1A8S10P) |
| LCD Interface | Support |
| Alarm Interface | Support |
| Bluetooth Function | Support |
| Protection Functions | Overcurrent Protection, Overvoltage Protection, Undervoltage Protection, Over Temperature Protection, Low Temperature Protection, Short Circuit Protection |
| Dimensions (L*W*H) | 153.9 * 107 * 17.6 mm |
| Certifications | CE, FCC, RoHS |
3. Packing List
Upon opening the package, please verify that all the following items are included:
- 1x BMS Unit
- 1x NTC Temperature Sensor (400mm)
- 1x Set of Balance Wires (750mm)
- 1x Switch (500mm)
- 1x Pack Box
- 2x M6 Screws
- 1x GH1.25mm-4P to SM A connector-2.54-2P+2P-150mm+100mm-CAN-485 Communication Cable
4. Installation
Proper installation is crucial for the safe and efficient operation of your BMS. Please follow these instructions carefully. It is recommended that installation be performed by a qualified professional.
4.1 Safety Precautions
- Always disconnect the battery pack from any loads or chargers before installation.
- Wear appropriate personal protective equipment (PPE), including insulated gloves and eye protection.
- Ensure all connections are secure and properly insulated to prevent short circuits.
- Verify correct polarity before making any connections.
4.2 Wiring Diagram
Refer to the wiring diagram below for connecting the BMS to your battery pack, charger, and load. The diagram illustrates the connections for the B- (total negative terminal), P- (total negative output terminal), and the charger/load connections.
4.3 Communication Cable Connection
The communication cable (GH1.25mm-4P to SM A connector-2.54-2P+2P-150mm+100mm-CAN-485) is used for RS485 and CAN communication. Pay close attention to the wire colors and their definitions.
- The cable colors must be implemented according to the definitions provided.
- Wrap all four wires (white, yellow, red, and black) with heat-shrink tubing for insulation.
- The total wire length is 250mm (150mm + 100mm).
4.4 Interface Overview
The BMS features a rich set of interfaces to support various communication and control needs:
- CAN: Controller Area Network interface for robust communication.
- RS485: Serial communication interface for industrial applications.
- BT (Bluetooth): Built-in Bluetooth for wireless app connectivity.
- NTC: Negative Temperature Coefficient thermistor input for temperature monitoring.
- Soft Switch: For power control.
- SOC Indicator: State of Charge indicator.
- Key Switch: For system activation/deactivation.
- Active Equalizer: For active cell balancing.
5. Operation
The JIKONG BMS can be monitored and controlled via a mobile application or PC software, providing a personal lithium battery steward experience.
5.1 Mobile App and PC Software
The JIKONG SMART BMS app supports iOS, Android, and HarmonyOS systems and multiple languages. It allows for remote operation and displays all battery information clearly.
Through the app or PC software, you can:
- Modify PVD (Protection Value Data)
- Turn Charge ON/OFF
- Turn Discharge ON/OFF
- Turn Balance ON/OFF
- Activate/Deactivate Emergency functions
- Control Display Always On ON/OFF
- Manage Smart Sleep On ON/OFF
- Configure Timed Stored Data ON/OFF
- Disable Temperature Sensor ON/OFF
5.2 Active Balancing
The BMS features active balancing technology, which achieves energy transfer by moving energy from cells with higher voltage to cells with lower voltage. This process ensures voltage balance with minimal energy loss, maximizing battery consistency, improving battery range, and delaying battery aging. The continuous balanced current ranges from 0.4A to 2A.
6. Maintenance
To ensure the longevity and optimal performance of your JIKONG BMS, follow these maintenance guidelines:
- Keep Clean: Regularly inspect the BMS for dust or debris accumulation. Use a soft, dry cloth to clean the surface.
- Environmental Conditions: Operate the BMS within its specified temperature and humidity ranges. Avoid exposure to extreme temperatures, moisture, or corrosive environments.
- Connection Integrity: Periodically check all wiring connections to ensure they are tight and free from corrosion. Loose connections can lead to poor performance or damage.
- Heat Dissipation: The BMS is designed with a fully aluminum alloy shell for superior heat dissipation. Ensure adequate airflow around the unit and do not obstruct its cooling surfaces.
7. Troubleshooting
The JIKONG BMS is equipped with multiple protection functions to safeguard your battery. If the system is not operating as expected, check for the following common issues:
7.1 Common Protection Triggers
- Overcharge Protection: If the battery voltage exceeds the set maximum, the BMS will stop charging. Check charger voltage settings and individual cell voltages.
- Over Discharge Protection: If the battery voltage drops below the set minimum, the BMS will stop discharging. Recharge the battery immediately.
- Overcurrent Protection: If the current drawn from or supplied to the battery exceeds the safe limit (100A continuous, 200A instantaneous), the BMS will cut off. Reduce the load or charging current.
- Short Circuit Protection: In case of a short circuit, the BMS will immediately cut off power. Identify and resolve the short circuit before attempting to restart the system.
- Over Temperature Protection: If the battery or BMS temperature exceeds safe operating limits, the BMS will activate protection. Ensure adequate ventilation and check for external heat sources.
- Low Temperature Protection: If the battery temperature drops below safe charging limits, the BMS may prevent charging. If equipped with heating, ensure it is functioning.
7.2 General Troubleshooting Steps
- Check Connections: Ensure all wires, especially balance wires and main power cables, are securely connected and free from damage.
- Monitor via App/Software: Use the JIKONG app or PC software to check real-time cell voltages, temperatures, and current. This can help pinpoint the exact issue.
- Restart BMS: Sometimes, a simple power cycle (disconnecting and reconnecting the battery) can resolve minor glitches.
- Consult Documentation: Refer to the detailed user manual (if a PDF is available, it would be referenced here) for specific error codes or advanced troubleshooting.
8. User Tips
- For optimal performance, ensure your battery pack is assembled with cells of similar internal resistance and capacity.
- Regularly check the cell voltage balance through the app, especially after initial setup or prolonged storage.
- If using the heating function, ensure it is configured correctly for your battery type and environmental conditions.
- Consider purchasing models with LCD displays for direct monitoring without needing a phone or PC.
- For inverter communication, ensure you select the correct SKU (e.g., JK-B1A8S10P-HCR-P-LINK-CR-RJ45) that includes the necessary P-LINK-CR-RJ45 cable.
9. Warranty and Support
JIKONG BMS products are manufactured to high-quality standards and are certified with CE, FCC, and RoHS. For any technical assistance, support, or warranty inquiries, please contact JIKONG BMS Global Store directly.
9.1 Contact Information
- Brand: JIKONG
- Seller: JIKONG BMS Global Store
- Phone: +86 13068721990
- Email: jasonliu@jk-smartbms.com
9.2 Optional Functions
JIKONG BMS supports various optional functions to meet different customer usage scenarios. If you require customized features, please contact customer support for details.
- A: ACC
- H: Heating
- P: Parallel
- T: 4 NTC
- M: Dry contact (buzzer alarm)
- D: Charger detection
- O: One-line connection
- C: CAN
- R: RS485
- E: Pre-Charge