1. Introduction
The fenvi FV-BE5400 is a high-performance WiFi 7 (802.11be) PCI Express wireless adapter designed for desktop computers. It provides advanced tri-band (2.4GHz, 5GHz, and 6GHz) connectivity with speeds up to 5400Mbps, ensuring an unimpeded streaming and gaming experience. Equipped with Bluetooth 5.4 technology, it offers lower latency, stronger anti-interference capabilities, and improved battery life for connected devices. This adapter is compatible with both Intel and AMD platforms and supports Windows 10 and Windows 11 (64-bit) operating systems.
2. Safety & Warnings
Important Safety Information:
- Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
3. Package Contents
Please check the package for the following items:
- fenvi FV-BE5400 WiFi 7 PCI Express Wireless Adapter
- High-gain Antennas (2 units)
- Low-Profile Bracket (for small form factor PCs)
- Mounting Screws
- User Manual (this document, also available as PDF)
For the PDF version of this manual, please refer to the official product page or download it from here.
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | fenvi |
| Model Name/Number | FV-BE5400 |
| Type | Wireless (Internal) |
| Application | Desktop |
| Interface Type | PCI Express (PCI-E) |
| Wireless Communication Standard | 802.11be (WiFi 7) |
| Wi-Fi Supported Frequency | Tri-Band (2.4G & 5G & 6GHz) |
| Wireless Transmission Rate | 5400Mbps (6GHz-2400Mbps, 5GHz-2400Mbps, 2.4GHz-574Mbps) |
| Bluetooth Protocol | Bluetooth 5.4 |
| Heat Dissipation | Support (Efficient Heatsink) |
| Compatibility | Intel and AMD platforms |
| Supported OS | Windows 10/11 (64-bit) |
| Antennas | 2*6dBi High-Gain Antennas |
| Certification | CE |
5. Setup Guide
5.1. Hardware Installation
- Power Off Your PC: Before starting, ensure your computer is completely powered off and unplugged from the power outlet.
- Open PC Case: Remove the side panel of your computer case to access the motherboard.
- Locate a PCI Express Slot: Find an available PCI Express slot (x1, x4, x8, or x16) on your motherboard.
- Install the Adapter: Carefully insert the fenvi FV-BE5400 adapter into the chosen PCI Express slot until it is firmly seated. If necessary, replace the standard bracket with the included low-profile bracket for smaller cases.
- Secure the Adapter: Use a screw to secure the adapter to the PC case.
- Attach Antennas: Screw the two high-gain antennas onto the connectors on the back of the adapter. Adjust their orientation for optimal signal reception.
- Close PC Case: Replace the side panel of your computer case.
- Power On: Plug in your computer and power it on.
5.2. Driver Installation
Before first use, it is crucial to install the corresponding drivers for both Wi-Fi and Bluetooth.
- Download Drivers: Visit the official fenvi website (fenvi.cn) to download the latest Wi-Fi and Bluetooth drivers for the FV-BE5400 model, specifically for your Windows 10 or Windows 11 (64-bit) operating system.
- Install Wi-Fi Driver: Locate the downloaded Wi-Fi driver file (usually an executable .exe file) and run it. Follow the on-screen instructions to complete the installation. You may need to restart your computer after installation.
- Install Bluetooth Driver: Similarly, locate and run the downloaded Bluetooth driver file. Follow the on-screen instructions. A restart might be required.
Note: Ensure you have an internet connection (e.g., via Ethernet) to download the drivers if you don't have them on a USB drive.
6. Operating Instructions
6.1. Wi-Fi Connectivity
- After driver installation and system restart, click on the Wi-Fi icon in your Windows taskbar.
- Select your desired Wi-Fi network from the list of available networks.
- Enter the network password if prompted and click 'Connect'.
- Your computer should now be connected to the Wi-Fi network.
6.2. Bluetooth Connectivity
- Ensure Bluetooth is enabled on your computer. You can usually find this in Windows Settings > Devices > Bluetooth & other devices.
- Put your Bluetooth device (e.g., headphones, mouse, keyboard) into pairing mode.
- On your computer, click 'Add Bluetooth or other device' and select 'Bluetooth'.
- Select your device from the list and follow any on-screen prompts to complete the pairing process.
7. Maintenance
- Keep Drivers Updated: Regularly check the fenvi official website (fenvi.cn) for the latest Wi-Fi and Bluetooth drivers to ensure optimal performance and security.
- Cleanliness: Keep your computer's interior clean to prevent dust buildup on the adapter's heatsink, which can affect performance. Use compressed air to gently clean the adapter and surrounding components.
- Antenna Placement: Ensure antennas are positioned optimally for the best signal. Avoid placing your PC in enclosed spaces or near large metal objects that could obstruct the signal.
8. Troubleshooting
8.1. Common Issues
- No Wi-Fi or Bluetooth Connection:
- Ensure the adapter is correctly seated in the PCIe slot.
- Verify that drivers are installed correctly. Check Device Manager for any yellow exclamation marks next to the network adapter or Bluetooth device.
- Try reinstalling the drivers from the fenvi website.
- Ensure Wi-Fi and Bluetooth are enabled in Windows settings.
- Slow Wi-Fi Speed:
- Check antenna orientation and ensure they are securely attached.
- Ensure your router supports WiFi 7 (802.11be) and is configured for tri-band operation.
- Move closer to your Wi-Fi router or reduce interference from other electronic devices.
- Update your router's firmware.
- Bluetooth Device Not Pairing:
- Ensure the Bluetooth device is in pairing mode.
- Remove any previous pairings of the device from your computer and try again.
- Restart both your computer and the Bluetooth device.
8.2. User Tips
- For optimal performance, always use the latest drivers available on the fenvi official website.
- If experiencing intermittent connectivity, try changing the Wi-Fi channel on your router to avoid interference.
- Consider using the 6GHz band for devices that require high bandwidth and low latency, as it is typically less congested.
9. Warranty & Support
For warranty information, technical support, and further assistance, please contact fenvi customer service through their official website (fenvi.cn). Please have your product model (FV-BE5400) and any relevant batch/serial numbers ready when contacting support.
Manufacturer: Shenzhen Fenvi Technology Co., LTD.
EU Authorized Representative: E-CrossStu GmbH
10. Compliance Information
This device complies with relevant regulatory standards. The following compliance marks are applicable:
- FC (Federal Communications Commission)
- CE (Conformité Européenne)
- UKCA (UK Conformity Assessed)