SAGE LU MEI GL-RC-002WL

Contents

WLED Remote Control User Manual

Model: GL-RC-002WL

Brand: SAGE LU MEI

1. Introduction

This manual provides comprehensive instructions for the SAGE LU MEI GL-RC-002WL WLED Remote Control. Designed for seamless integration with GLEDOPTO WLED digital LED strip controllers, this remote utilizes ESP Now technology for efficient wireless communication. It offers advanced features such as 7 group preset scenes, sleep mode, and precise dimmable brightness adjustment. Please read this manual thoroughly before operating the device to ensure proper functionality and to prevent any potential damage.

2. Safety & Warnings

To ensure safe operation and prevent damage to the device or injury, please observe the following warnings:

  • Warning: Keep the device and its cord (if any) out of reach of children under 3 years old.
  • Do not expose the remote control to water, excessive moisture, or extreme temperatures.
  • Avoid dropping the device or subjecting it to strong impacts.
  • Do not attempt to disassemble, modify, or repair the remote control yourself. This will void the warranty.
  • Use only specified battery types (AAA 1.5V) and ensure correct polarity during installation.

3. Package Contents

Upon opening the package, please verify that all the following items are included:

  • 1x WLED Remote Control (Model: GL-RC-002WL)
  • 1x User Manual
Image showing the WLED Remote Control GL-RC-002WL alongside its retail packaging.
Image: WLED Remote Control and its packaging.

4. Product Overview

The GL-RC-002WL is an intelligent and user-friendly remote control designed to enhance your WLED lighting experience. It offers a range of features for convenient control of your LED strip controllers.

Diagram illustrating the multiple functions of the WLED Remote Control: 7 Group Preset Scenes, Sleep Mode, Brightness Changeable, 50 meters control distance, WiFi Control, and Fireproof PC material.
Image: Overview of the WLED Remote Control's multiple functions.

4.1 Button Functions

Diagram of the WLED Remote Control showing the layout of buttons and their labels: Indicator light, ON, OFF, S1-S7 for preset scenes, Brightness +, Brightness -, and Night light.
Image: Product presentation highlighting the indicator light and button functions.
  • Indicator Light: Displays the current status of the remote control.
  • ON: Powers on the connected WLED device.
  • OFF: Powers off the connected WLED device.
  • S1-S7: Short press these buttons to recall pre-configured scenes from the WLED application.
  • Brightness +: Increases the brightness level of the lights.
  • Brightness -: Decreases the brightness level of the lights.
  • Night Light: Activates a low-brightness night light mode.

5. Specifications

Feature Specification
Model No. GL-RC-002WL
Input Voltage 3V (2*1.5V AAA Batteries)
Standby Current <13uA
Control Distance 50m
Wireless Communication WiFi (2.4GHz)
Material PC (Fireproof)
Working Temperature -20°C to 45°C
Waterproof Rating IP20
Dimensions 39 x 16 x 143mm
Net Weight (N.W.) 51.8g
Gross Weight (G.W.) 62.0g
Features ESP NOW, 7 Group Preset Scenes, Dimmable Brightness
Certification CE, ROHS
Diagram showing the physical dimensions of the remote control (39mm width, 16mm thickness, 143mm length) and a table of detailed product specifications.
Image: Detailed product parameters and dimensions.

6. Setup and Connection

6.1 Battery Installation

The remote control is powered by two AAA 1.5V batteries (not included).

Image showing the back of the remote control with the battery cover removed, revealing the battery compartment for two AAA batteries. Two AAA batteries are depicted next to the remote.
Image: Battery compartment for 2*AAA 1.5V batteries.
  1. Locate the battery cover on the back of the remote control and slide it open.
  2. Insert two AAA 1.5V batteries, ensuring that the positive (+) and negative (-) terminals match the indicators inside the compartment.
  3. Slide the battery cover back into place until it clicks securely.

6.2 Initial Preparation

Before first use, perform the following steps:

  1. Remove any protective films from the device's surface.
  2. Power On: Press and hold the 'ON' button for approximately 3 seconds to turn on the remote control.

Note: The provided PDF user manual mentions "Charging: Connect the provided USB cable to a certified 5V power adapter." However, based on product specifications and imagery, this remote control is battery-powered (2*AAA) and does not feature a USB charging port. Please disregard the USB charging instruction for this specific model.

6.3 WLED Remote Control Connection Steps

To ensure proper functionality, your WLED controller must be running version 0.14.0-beta3 or above. The remote is compatible with Gledopto WLED series digital LED strip controllers.

Image showing the WLED Remote Control alongside various Gledopto WLED digital LED strip controllers, indicating broad compatibility.
Image: Compatibility with Gledopto WLED digital LED strip controllers.
Five sequential screenshots of a mobile app interface detailing the steps to connect the WLED remote control. This includes navigating to 'Config', 'WiFi Setup', enabling 'Wireless Remote', and copying 'Last Seen' to 'Hardware MAC'.
Image: WLED Remote Control Connection Steps via the WLED controller app.
  1. Access the WLED controller's control page (usually via a web browser or dedicated app).
  2. Click on the
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.