1. Introduction
The JARJUM MP-1 is a versatile 2-in-1 effects pedal designed for electric guitars, offering both Wah and Volume functions. This compact and durable pedal provides musicians with precise control over their sound, featuring an RM-type shielded inductor for superior tone and a robust, non-slip design for stable performance.
2. Key Features
- Dual-Functionality: Seamlessly switch between Wah and Volume modes.
- Intuitive Mode Switching: A single click on the footswitch changes modes, indicated by clear dual-color LEDs.
- Superior Tone: Equipped with RM-type shielded inductors customized to prevent interference and ensure a rich, clear Wah tone.
- Precise Control: Features a large 23° angle stroke design, allowing for a wider and more accurate range of expression.
- Durable Construction: Made from high-quality ABS material for longevity.
- Stable Performance: Anti-slip pattern on the pedal surface and non-slip rubber pads on the bottom ensure stability during use.
3. Specifications
| Attribute | Value |
|---|---|
| Material | ABS |
| Color | Black |
| Product Dimensions (L x W x H) | Approx. 13.5 x 5 x 7 cm (5.3 x 2 x 2.8 inches) |
| Control Mechanism | Pedal sweep, Footswitch |
| Audio Output Effects | Modulation |
| Power Supply | External DC 9V (not included) |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 15 x 9 x 5 cm |
| Package Weight | 0.291 kg |
4. Package Contents
- 1 x JARJUM MP-1 Guitar Wah Volume Pedal
5. Setup Instructions
- Connect Your Guitar: Plug your electric guitar into the 'IN' jack on the side of the pedal using a standard 1/4-inch instrument cable.
- Connect to Amplifier/Other Effects: Connect the 'OUT' jack of the pedal to your amplifier's input or to the input of your next effects pedal in the signal chain, using another 1/4-inch instrument cable.
- Power Connection: Connect a compatible DC 9V power adapter (not included) to the DC input jack on the side of the pedal. The pedal will power on when a cable is inserted into the input jack and power is supplied.

6. Operating Instructions
- Power On: Ensure all connections are secure and the power adapter is plugged in. The pedal is ready for use when powered.
- Mode Switching: The JARJUM MP-1 features two modes: Wah and Volume. To switch between these modes, simply step on the footswitch with a single click. Dual-color LEDs on the pedal will illuminate to indicate the currently active mode (e.g., one color for Wah, another for Volume).

Figure 6.1: The pedal's footswitch and dual-color LEDs for easy mode selection between Volume and Wah. - Volume Mode: When in Volume mode, use the pedal's sweep (rocking motion) to control the overall volume level of your guitar signal. Pushing the pedal forward typically increases volume, while pulling it back decreases volume.
- Wah Mode: When in Wah mode, use the pedal's sweep to control the wah effect, creating the characteristic vocal-like filtering sound. Pushing the pedal forward and pulling it back will sweep through the filter's frequency range.
- Control Range: The pedal is designed with a 23° wide angle stroke, providing a broad and precise range of control for both volume and wah effects.

Figure 6.2: Illustration of the pedal's 23° large angle stroke design, enabling wide and precise control.
7. Maintenance
- Cleaning: To clean the pedal, wipe it with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
- Storage: Store the pedal in a dry environment, away from direct sunlight, extreme temperatures, and high humidity.
- Non-slip Pads: Periodically check the non-slip rubber pads on the bottom of the pedal to ensure they are clean and intact. This helps maintain stability during use.

Figure 7.1: View of the pedal's underside, highlighting the non-slip rubber pads for enhanced stability.
8. Troubleshooting
- No Sound:
- Ensure all instrument cables are securely connected to the 'IN' and 'OUT' jacks.
- Verify that the DC 9V power adapter is correctly connected and supplying power.
- Check if your guitar and amplifier are functioning correctly.
- Poor Tone or Interference:
- The pedal incorporates RM-type shielded inductors designed to minimize interference and ensure superior tone. If you experience issues, check for external sources of electromagnetic interference.
- Ensure all equipment in your signal chain is properly grounded.

Figure 8.1: The pedal's internal design featuring RM-type shielded inductors for optimal sound quality. - Pedal Not Responding:
- Confirm that the power supply is connected and functional.
- Check the integrity of your instrument cables; try swapping them with known working cables.
9. User Tips
- Power Adapter Compatibility: This pedal requires an external 9V DC power adapter (not included). For best performance and to avoid damage, ensure the adapter is specifically designed for guitar pedals, typically providing 9V DC with a center-negative polarity.
- Experimentation: Take time to experiment with both the Wah and Volume modes. The wide sweep range allows for subtle nuances and dramatic effects. Explore how different settings interact with your guitar and amplifier.
10. Warranty and Support
For detailed warranty information, technical support, or service inquiries, please refer to the policies provided by your retailer or contact the manufacturer directly. It is recommended to retain your purchase receipt as proof of purchase for any warranty claims.