1. Product Overview
This computer case is a hardware storage and protection device specifically designed for desktop computers. Manufactured with high-quality materials, it integrates excellent heat dissipation performance, expanded compatibility, and a user-friendly installation experience. Suitable for various scenarios including home office, gaming entertainment, and professional design, it provides a safe and stable operating environment for computer hardware.
2. Feature Introduction
- Hardware Protection Function: The main body of the case is made of high-strength cold-rolled steel, featuring a robust structure. It can effectively resist external impacts, prevent dust accumulation, and shield against electromagnetic interference, protecting core hardware such as motherboards, CPUs, and graphics cards from damage and extending their service life.
- Efficient Heat Dissipation System: Supports multiple fan mounting positions (optional front, rear, top/bottom). Some models are equipped with heat dissipation grilles or water cooling installation brackets, with an optimized air duct design that quickly expels internal heat, avoiding hardware overload caused by high temperatures.
- Rich Expansion Interfaces: The front panel is equipped with USB 3.0/2.0 interfaces, audio interfaces (headphone/microphone), and some models support Type-C interfaces. It facilitates easy connection of external devices such as USB flash drives, headphones, and portable hard disks, meeting daily data transmission and audio usage needs.
- Flexible Drive Bay Design: Provides multiple hard disk mounting positions (supporting 2.5-inch SSDs and 3.5-inch HDDs), supports long graphics cards, and is compatible with mainstream motherboard form factors including partial ATX, M-ATX, and ITX, satisfying the upgrade needs of different hardware configurations.
- User-Friendly Operation Design: Tool-free side panel removal (for some models), adjustable hard disk racks, and cable management holes with rubber protection to prevent cable wear, simplifying hardware installation, removal, and cable organization for improved assembly efficiency.
3. Setup: Hardware Installation Steps
Before beginning installation, ensure you have all necessary components and tools. Always disconnect the power supply and touch a metal object to discharge static electricity before handling hardware.
- Open the Case: Unscrew the fixing screws of the case side panel (or snap open buckles for tool-free models), remove the side panel, and expose the internal installation area.
- Install the Motherboard: Place the motherboard into the case's motherboard tray, align it with the screw holes, and fix the motherboard with the included screws. Ensure no contact between the motherboard and the case's metal parts to avoid short circuits.
- Install the CPU and Cooler: According to the installation method corresponding to the CPU model, insert the CPU into the motherboard socket and secure it. Apply thermal grease, then install the cooler and connect the cooler's power cable to the corresponding motherboard interface.
- Install the Memory: Open the latches on the motherboard's memory slots, align the gold fingers of the memory module with the slot's notch, insert vertically, and press until the latches automatically lock into place.
- Install Storage Devices: Place the 2.5-inch SSD or 3.5-inch HDD into the corresponding drive bay, fix it with screws (or push in for tool-free bays). Connect the SATA data cable (insert NVMe-supported SSDs into the motherboard's M.2 interface) and power cable.
Internal view illustrating the SSD (x2) and HDD (x1) drive bay locations for storage device installation. - Install the Graphics Card: Open the latch on the motherboard's PCIe slot, insert the graphics card's gold fingers into the slot and press to secure. Fix the graphics card bracket to the rear of the case with screws, then connect the graphics card's power cable.
- Connect Power Supply and Cables: Install the power supply into the case's power supply bay and secure it. Connect the 24Pin motherboard power cable, CPU power cable, hard disk power cable, etc.; connect the case's front USB cables, audio cables, power button cable, reset cable, etc., to the corresponding motherboard interfaces (refer to the motherboard manual for interface definitions).
- Organize Cables and Close the Case: Use cable ties to organize excess cables for optimized air flow; reattach the side panel to the case and tighten the fixing screws (snap closed for tool-free models).
- Power-On Test: Connect external devices such as monitors, keyboards, and mice, turn on the power, and press the case's power button. The installation is complete if the hardware starts normally.
4. Operating: Daily Operation Instructions
- Power On: Press the power button on the front or top of the case; the power indicator will light up, and the computer will start.
- Restart: To restart the computer during operation, use the system's restart function or press the reset button briefly (avoid long presses).
- External Devices: Connect external devices via the front USB ports, Type-C port, or audio interfaces for plug-and-play use (drivers may be required for some devices).
Front panel interfaces for convenient connectivity, including USB 2.0, USB 3.0, HD Audio, and control buttons.
5. Maintenance
Proper maintenance ensures the longevity and optimal performance of your PC case.
- Cleaning Dust: When cleaning dust inside the case, disconnect the power supply and use a hair dryer on the cool setting or a soft brush for gentle cleaning. Do not rinse with water or scrape hardware with sharp tools.
- Dust Filters: The case is equipped with a top magnetic dust filter and a bottom pull-out dust filter. Regularly remove and clean these filters to prevent dust accumulation and maintain optimal airflow.
6. Troubleshooting (FAQs)
- Q: No response when pressing the power button, and the power indicator does not light up?
- A: Check if the power plug is securely connected and the power cable is damaged; confirm the power switch is turned on; inspect the 24Pin motherboard power cable and CPU power cable for secure connections; if the power supply has a test button, press it to check for power supply failures.
- Q: The computer shuts down automatically or displays a blue screen after startup?
- A: This is most likely due to poor heat dissipation or loose hardware connections. Check if the cooler is properly installed and the fan is running normally; reinsert memory, graphics cards, and other hardware to ensure secure connections; check if the CPU temperature is too high and replace thermal grease if necessary.
- Q: The front USB ports or audio interfaces are unavailable?
- A: Check if the case's front cables are correctly and securely connected to the motherboard interfaces; confirm the corresponding motherboard interfaces are enabled (some motherboards require settings in BIOS); test with alternative external devices to rule out device-specific faults.
- Q: Excessively loud noise during case operation?
- A: Check if fans are excessively dusty and clean them; ensure fans are securely installed without loose collisions; replace aging fans with the same specifications if needed; adjust fan speed (via motherboard BIOS or third-party software).
- Q: The graphics card cannot be installed or is not recognized after installation?
- A: Check if the graphics card dimensions exceed the case's compatible length; confirm the PCIe slot is functional by testing with an alternative slot; verify the graphics card power cable is properly connected; update the motherboard BIOS and graphics card drivers.
7. Specifications
| Attribute | Value |
|---|---|
| Model Number | Dreamer Mini |
| Chassis Type | Desktops |
| Application | Desktop |
| Form Factor | MicroATX, ITX |
| Material | Steel, Tempered glass, others |
| Case Size (L*W*H) | 350*280*375MM (Mini version) |
| Case Weight | 4kg (Net), 5.493kg (Package) |
| Max GPU Length | 330mm |
| Max CPU Cooler Height | 175mm (Supports up to 157MM for radiators) |
| Internal 2.5" Drive Bays | 2 (SSD) |
| Internal 3.5" Drive Bays | 1 (HDD) |
| Power Model | ATX (Supports 140/160mm power supplies) |
| With Power Supply | No |
| With Fan | No |
| With Side Panel Window | Yes (Three-sided tempered glass) |
| RGB Support | NO RGB (Case itself, supports aRGB fans) |
| Interface Support | Top HD AUDIO; USB3.0*1; USB2.0*1 |
| Air Cooling System | Front side: 2*120MM, Bottom plate: 2*120MM, Plate: 2*120MM, Board: 1*120MM (Total 7 fan slots) |
| Water Cooling System | Top 240 water cooling, Rear plate 120 water cooling (Total 3 water cooling positions) |
| Package Dimensions (L*W*H) | 44*44*35 cm |
8. User Tips
- Cable Management: Utilize the provided cable management holes and ties to ensure clean routing of cables. This not only improves aesthetics but also enhances airflow and cooling efficiency.
- Dust Prevention: Regularly check and clean the magnetic top dust filter and pull-out bottom dust filter to maintain optimal airflow and prevent dust buildup inside the case.
- Component Compatibility: Always double-check the dimensions of your CPU cooler, graphics card, and power supply against the case's maximum supported lengths and heights to ensure a smooth build process.
- Static Discharge: Before handling any internal components, always ground yourself by touching a metal object to prevent electrostatic discharge (ESD) damage.
9. Safety Information and Precautions
▲ ATTENTION: Not suitable for children aged 14 to touch after power is turned on.
- Unboxing Inspection: Take photos or videos immediately to check for collisions or damage to the shipping box and whether the cooler inside the case is skewed. Record the entire unboxing process with videos or photos to form a complete evidence chain and prevent after-sales disputes.
- Static Electricity: Before installation or disassembly, always disconnect the power supply and touch a metal object to discharge static electricity to avoid static damage to hardware.
- Placement: Place the case on a flat, well-ventilated surface, away from humid, high-temperature, and dusty areas. Avoid direct sunlight and liquid spills.
- Screw Tightening: When installing hardware, tighten screws with moderate force to prevent deformation or damage to motherboards, hard disks, and other hardware due to over-tightening.
- Power Supply: Do not disassemble the internal structure of the power supply by yourself. Power supply failures should be repaired by professional personnel to avoid electric shock hazards.
- Abnormal Operation: If the case produces abnormal noise, odor, or automatic shutdown during operation, immediately disconnect the power supply. Check hardware connections and heat dissipation, or contact after-sales service. Do not force a restart.
- Weight Distribution: Avoid placing heavy objects on the case to prevent deformation that may affect the operation of internal hardware.
- Component Dimensions: Only install hardware that meets standard specifications. Do not install graphics cards, coolers, or other devices exceeding the case's compatible dimensions.
10. Warranty and Support
For any product issues or after-sales inquiries, please follow these guidelines:
- Evidence Preservation: When users discover product issues, they must preserve evidence immediately, including photos/videos of the faulty parts, screenshots of purchase receipts, and logistics delivery records (provide complete unboxing videos if damage is found during unboxing).
- Contact Support: Contact official after-sales channels, specify the product model, fault description, purchase time, and scenario of the issue, and submit the preserved evidence.
A detailed user manual in PDF format is available for download and reference: View User Manual (PDF)