1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your EVCO EV3 series thermostat/controller. The EV3 series offers a range of advanced temperature control solutions for various applications, including refrigeration, heating, and air-conditioning systems. Please read this manual thoroughly before attempting to install or operate the device.
2. Product Overview
The EVCO EV3 series includes several models designed for specific control needs:
- EV3B21/EV3B31 Temperature Controller: Standard temperature control.
- EV3B23/EV3B33 Air-cooled Temperature Controller: Optimized for air-cooled systems.
- EV3401 Series Single Output Temperature Controller: Features a single control output.
- EV3402 Series Dual Output Temperature Controller: Provides two independent control outputs.
- EV3412M Series Three Output Temperature Controller: Offers three control outputs for complex systems.
- EV3X21 Series Thermostat: General-purpose thermostat.
- EV322 Series Temperature Controlled EVCO: Specific temperature control applications.
Each model is designed with user-friendly interfaces and robust performance for reliable temperature management.
Figure 1: EV3 Series Controller (EV3B23N7 model shown) with wiring terminals and digital display. This image illustrates the physical appearance and connection points for power, fan, compressor, defrost, and digital inputs.
Figure 2: EV3401 Series Single Output Temperature Controller. Displays the digital temperature reading and control buttons (SET, Power, FNC, Up, Down).
Figure 3: EV3402 Series Dual Output Temperature Controller. Similar to EV3401, showing digital display and control buttons, indicating dual output capability.
Figure 4: EV3412M Series Three Output Temperature Controller. Shows the digital display and control buttons, highlighting its three output functionality.
3. Setup and Installation
3.1 Mounting
The controller should be mounted in a dry, well-ventilated area, away from direct heat sources, strong electromagnetic fields, and excessive vibrations. Ensure adequate space around the unit for proper air circulation and access to wiring terminals.
3.2 Electrical Connections
All electrical connections must be performed by qualified personnel and comply with local electrical codes. Ensure the power supply is disconnected before making any connections.
Refer to the specific model's wiring diagram (e.g., Figure 1 for EV3B23N7) for terminal assignments. Common connections include:
- Power Supply: Connect the appropriate voltage (e.g., 230 VAC, 115 VAC, or 12~24 VAC/DC depending on model) to the designated power terminals.
- Sensor Inputs: Connect temperature sensors (PTC, NTC, Pt1000, J/K, Pt100, Ni120, etc.) to the analog input terminals.
- Digital Inputs: Connect external switches or signals to the multi-function digital input terminals.
- Outputs: Connect controlled devices (e.g., fan, compressor, defrost heaters) to the relay output terminals (K1, K2, etc.). Ensure the load current does not exceed the relay's rating (e.g., 16 A, 8 A).
- Data Interface: For models with communication capabilities (e.g., TTL MODBUS, TTL/RS-485, eVlink Bluetooth/WiFi), connect to the respective data ports.
WARNING: Incorrect wiring can cause damage to the device and pose a safety hazard. Always verify connections before applying power.
4. Operating Instructions
4.1 Basic Display and Buttons
The controller features a digital display showing the current temperature or parameter values. Control is typically managed via a set of buttons:
- SET Button: Used to enter parameter setting mode or confirm selections.
- Up/Down Arrows: Used to navigate menus or adjust parameter values.
- FNC Button: (Function) Used for accessing specific functions or modes.
- Power Button: Used to turn the unit ON/OFF or for standby mode.
4.2 Setting the Setpoint Temperature
- Press the SET button. The display will show the current setpoint value.
- Use the Up or Down arrow buttons to adjust the setpoint to the desired temperature.
- Press the SET button again to confirm and save the new setpoint.
4.3 Control Modes
Depending on the model and configuration, the controller supports various control modes:
- Heating/Cooling Control: Standard modes for maintaining temperature by activating heating or cooling elements.
- ON-OFF Control: Simple switching of outputs based on setpoint and hysteresis.
- PID Control: Advanced proportional-integral-derivative control for precise temperature regulation (available on EV3412M and other advanced models).
- Intermediate Control Mode: Specific to certain dual/triple output models like EV3402 and EV3412M.
Consult the detailed programming manual for your specific model to configure advanced parameters and control modes.
5. Maintenance
To ensure optimal performance and longevity of your EVCO controller, follow these maintenance guidelines:
- Cleaning: Periodically clean the controller's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the display and buttons are free from dust and debris.
- Inspections: Regularly check all electrical connections for tightness and signs of corrosion or damage.
- Environmental Conditions: Ensure the operating environment remains within the specified temperature and humidity ranges to prevent malfunction.
CAUTION: Disconnect power to the unit before performing any cleaning or inspection to prevent electrical shock.
6. Troubleshooting
This section provides solutions to common issues you might encounter. For problems not listed here, contact technical support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Controller does not power on | No power supply; incorrect wiring; blown fuse. | Check power connections; verify wiring against diagram; replace fuse if necessary. |
| Incorrect temperature reading | Faulty sensor; sensor incorrectly connected; sensor type mismatch. | Check sensor wiring; replace sensor; ensure correct sensor type is configured in parameters. |
| Output (e.g., compressor) not activating | Setpoint not met; output relay fault; parameter misconfiguration. | Adjust setpoint; check relay status; review control parameters (e.g., hysteresis, delays). |
| Display shows error code | Specific system fault. | Refer to the specific model's programming manual for error code definitions and solutions. |
7. Specifications
| Feature | Details (Model Dependent) |
|---|---|
| Brand | EVCO |
| DIY Supplies | Electrical |
| Power Supply | 230 VAC, 115 VAC, or 12~24 VAC/DC |
| Analog Inputs | PTC, NTC, Pt1000, J/K, Pt100, Ni120, 0-20mA, 4-20mA, 0-10V, 2-10V |
| Digital Inputs | Multi-function digital inputs |
| Relay Outputs | K1 (16 A res. @ 250 VAC), K2 (8 A res. @ 250 VAC) |
| Analog Outputs | 0-10V / PWM (on EV3412M) |
| Communication | TTL MODBUS, TTL/RS-485, eVlink Bluetooth/WiFi module (on EV3412M) |
| Alarm | Buzzer |
| Dimensions (approx.) | Length: 22 cm, Width: 22 cm, Height: 11 cm |
| Weight (approx.) | 1.0 kg |
8. User Tips
- Always ensure the correct sensor type is selected in the controller's parameters to get accurate readings.
- For critical applications, consider using a secondary temperature monitoring device to verify the controller's readings.
- When configuring advanced settings, make small adjustments and observe the system's response before making further changes.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your authorized EVCO distributor or the point of purchase. Ensure you have your product model number and serial number available when contacting support.
Video 1: Seller contact information. This video provides details on how to reach the seller for product inquiries and support.