Foreword
Thank you for using our 6-inch 1500nit field monitor. Please read this manual carefully before using the unit. Have a great experience!
Cautions
- Please avoid dropping the product onto the ground to prevent damage.
- The screen of this product is made of glass. Keep away from injury if the screen is broken.
- Keep the product away from heat sources. Avoid prolonged exposure to direct sunlight as the LCD screen may be damaged.
- To avoid damaging the product, do not disassemble or repair the unit yourself without the adjustable components in the unit.
- To protect the screen or housing, please follow these guidelines:
- Refrain from using hard objects to hit the screen.
- Do not force to wipe the screen or housing.
- Do not use chemical solutions to clean the screen or housing.
- Do not spray any detergent on the screen or housing.
- Do not write on the screen directly.
- Do not stick anything on the screen or housing.
- Simply wipe with a clean soft cloth and ensure no water is on the screen or housing.
Key Features
- FHD 1920x1080 IPS display for confident viewing of details.
- Sensitive touch screen combined with innovative and flexible knob operation to meet different needs.
- 1500nit high brightness, visible in sunlight.
- Rugged and durable aluminium housing.
- Equipped with 4K 60Hz HDMI and 3G-SDI input and output.
- Load custom 3D-LUTs to preview film looks (up to 32 custom LUTs).
- HDR monitoring: what you see is what you get.
- Waveform, Vector, Histogram, and audio meter can be moved horizontally and vertically.
- 4-group user switching for quick access to already set menus.
- 3.5mm earphone output for real-time audio monitoring.
- Built-in cooling fan with adjustable speed (1-5) for efficient heat dissipation.
- Supports 12 languages.
Product Overview
The FEELWORLD SC6 is a 6-inch aluminium monitor designed for professional video production. It features a 1500nit high-brightness IPS touch screen with 1920x1080 resolution, knob control, 3G SDI, 4K HDMI, HDR, and 3D LUT support.


Setup
Power Supply
There are two ways to power the monitor:
- DC Input (Barrel Connector): The monitor has a barrel connector (5.5mm outer, 2.1mm inner) at the rear for DC 7-24V input. It is recommended to use a 12V/2A power adapter.
- NP-F Battery Slot: The rear cover of the monitor is equipped with an NP-F battery slot, compatible with NP-F series batteries (e.g., F970, F960, F950, F930, F770, F750, F730, F570, F550, F530).
Note: When using DC OUT 8.4V to power another device simultaneously, a 12V/4A power adapter or higher capacity battery is required.
Battery Installation and Removal
- Installation: Insert the battery gently in the indicated direction, then slide it downward (without releasing). A clicking sound indicates secure placement.
- Removal: To remove the battery, press and hold the battery release button while sliding the battery upward, then remove it.

Remark: It is recommended to use standard original F970 batteries. Different battery specifications have different capacities, affecting monitor working time. Please remove the battery if the monitor will not be used for a long time.
DC OUT 8.4V
The DC power output interface provides 8.4V output. This barrel output can power your camera with a separately available DC coupler via adapter (e.g., NP-FW50 for Sony, LP-E6 for Canon, DMW-BLF19 for Panasonic). More adapters are coming soon.
Connection Method and Cautions for Monitor and Camera
Preparing before connecting
- Ensure that both the camera/camcorder and monitor are turned off.
- Check if the HDMI/SDI interface and cables are clean and intact.
- Prepare anti-static wristbands or discharge static by touching a metal object first.
- Ensure that the workbench is clean and stable.
Connection of HDMI cable
- Use the accompanied HDMI/Micro HDMI cable to connect the HDMI IN of the monitor and the HDMI Out of the camera (purchase an extra HDMI cable if the provided one is not long enough).
- Fix the wire to avoid hanging or pulling it.
- Turn on the camera first, then turn on the monitor. The camera viewfinder image will be displayed on the monitor screen. Set the camera's HDMI output to Auto or 16:9 if it has this function.
- When shutting down, first turn off the monitor, wait for it to completely shut down, then turn off the camera.
Connection of SDI cable (available separately)
- Use an SDI cable to connect the SDI IN of the monitor and the SDI Out of the camcorder.
- Fix the wire to avoid hanging or pulling it.
- Turn on the camcorder first, then turn on the monitor. The camcorder image will be displayed on the monitor screen.
- When shutting down, first turn off the monitor, wait for it to completely shut down, then turn off the camera.
Using Cautions for Connections
- When moving the device, be careful not to trip over wires, which may cause hot plugging or unplugging.
- Regularly check whether the HDMI/SDI interface and cables are worn or blocked by foreign objects.
- It is recommended to disconnect cables when not in use to protect them and the interfaces.
Physical Protection Measures
- Use HDMI cable fixing clips or brackets.
- The wire should have appropriate slack to avoid being too tight.
- Consider using an L-shaped HDMI connector to reduce pressure on the HDMI interface.
- You can use an HDMI adapter to protect the HDMI interface on the camera and avoid damage from frequent plugging and unplugging.
Installation of Mini Hot Shoe Mount Adapter
- Select the direction in which the adapter is mounted according to the shape of the hot shoe on the camera.
- Align the 1/4 screw of the adapter with the 1/4 screw hole on the device.
- Tighten the adjustment knob of the adapter.
- Fully insert the base of the adapter into the universal hot shoe base in the direction shown in the figure.
- Tighten the rotary table of the adapter to fix it on the camera.

Note: If using a camera with a pop-up built-in flash, please turn off the built-in flash. If the camera has an auto flash function, please turn it off. Remove this device from the camera before using the flash.
Installation of Sunshade
- First, lock the Sunshade Frame with the monitor tightly.
- Open the sunshade and match the sticker on the sunshade inside to the marked part of the sunshade frame.
- Smooth and press the 3 sides on the sunshade, then complete the sunshade installation.

Operating
Menu and Button Operation Instruction
After correctly connecting to the power supply (red indicator), the monitor will automatically turn on by default. The indicator turns Yellow, and then upon HDMI signal input, the indicator will turn Green from Yellow.
You can also set the power to 'Manually' in the menu 'System' -> 'Power setting'. After setting, you will need to long-press the power button to turn on the monitor when plugging in the power supply.
MENU Knob Operation
- When the menu is not displayed, directly rotate the menu knob to adjust the volume or backlight. This can be configured in the 'Left Right Key Set' of the 'User Option' menu.
- Long press the MENU Knob to call up the shortcut menu. Rotate it to select a function, then press to confirm. Long press the MENU Knob again to exit the shortcut menu.
- Press the MENU Knob to enter the OSD main menu. Rotate the knob to select the secondary menu.
- Press the MENU Knob to enter the secondary menu. Rotate the knob to select items. After selecting, press the knob to confirm and enter the function menu. Rotate the knob to select the corresponding function or adjust parameters. Press the knob to confirm finally.
- Press the MODE/EXIT button to return or exit the menu.
Touch Screen Menu Operation
Touch function on/off setting: You can assign any of the top F1~F3 buttons as the touch switch. Enter the menu: 'User Options' -> 'Shortcut Key' -> 'F1/F2/F3' -> 'Touch Switch'. After setting, you can directly press the assigned F shortcut key to turn the touch function on or off.
- Double-click on the screen to open the main menu (shown on the left side of the screen). Click on the corresponding menu to display the secondary menu. You can enter the corresponding function option and click directly to select or set. Click the touch screen to exit the menu.
- When the menu is not displayed, swipe up from the bottom of the screen to open the shortcut menu. Swipe left or right to select the needed function and click on the corresponding menu box to turn on or off the function.
- When the menu is not displayed, on the left side of the screen (1/2 split screen), you can directly adjust the brightness of the screen backlight. On the right side of the screen (1/2 split screen), you can directly adjust the volume.

Menu Function Instruction
The monitor offers a wide range of auxiliary functions accessible through its menu system:
| Function | Description |
|---|---|
| Assist | Enables/disables various assist tools. |
| All Waves | When enabled, waveform, vector, histogram, and embedded audio will be shown. |
| Waveform | On/Off. Modes: RGB, YUV, Y. Position X/Y: 0-100. Waves Trans.: Off, 25%, 50%, 75%. Assists with camera calibration by showing overall image brightness and lighting evenness. |
| Vector | On/Off. Position X/Y: 0-100. Shows image saturation and pixel location on the color spectrum. |
| Histogram | On/Off. Modes: RGB1, RGB2, Y. Position X/Y: 0-100. Displays graphic of color tone distribution, exposure status, and overlapping histograms (red, green, blue). Y Histogram checks picture brightness. |
| Focus Assist | On/Off. Color: Red, Green, Blue. Peaking Level: 1-10. Highlights in-focus areas for quick and accurate focusing. |
| Embedded Audio | On/Off. Position X/Y: 0-100. Audio Level Meters provide numerical indicators and headroom levels. |
| Zebra Pattern | On/Off. Threshold Value: 10-100. Fills areas above a certain threshold with a striped pattern to highlight overexposed areas. |
| Check Field | On/Off. Mode: Red, Green, Blue, Mono. Adjusts hue and saturation quickly and accurately. |
| False Colors | On/Off. Mode: Normal, ARRI. Depicts objects in colors different from a true color image to show exposure levels. |
| Time Code | On/Off. Mode: LTC, VITC. |
| Marker | Enables/disables various markers. |
| Grid | On/Off. Modes: 2x2 to 9x9, Custom (Rows: 2-9, Columns: 2-9). Color: Red, Green, Blue, Black, White, Gray. Divides the picture into equal grids. |
| Safe Frames | Color: Red, Green, Blue, Black, White, Gray. |
| Center Marker | On/Off. Color: Red, Green, Blue, Black, White, Gray. |
| Ratio Marker | On/Off. Modes: 4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1, 9:16. Color: Red, Green, Blue, Black, White, Gray. Modified Mark: 0-5. |
| Image | Image adjustment settings. |
| Scan Mode | Under Scan, Over Scan. |
| Aspect Ratio | Auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, Full Screen. Provides various aspect ratios to match different cameras and anamorphic lenses. |
| Anamorphic | On/Off. Mode: 1.33X, 1.6X, 2.0X, 2.0X MAG, User (customizable 1.20X~2.00X). Allows viewing unsqueezed images from anamorphic lenses. |
| Image Flip | On/Off. Mode: H Flip, V Flip, H_V Flip. |
| Zoom Mode | On/Off. Mode: 2X, 4X, 9X, 16X, User (customizable 100%~200%). Provides amplification for high-quality close-up of any HD signal part. |
| Image Freeze | On/Off. |
| P2P (Pixel to Pixel) | On/Off. Enables checking the image from the 1:1 signal source without scaling, essential for capturing optimum detail. |
| User Option | Contains settings for LUT, HDR, and display adjustments. |
| LUT | On/Off. After LUT Switch is on, use Lut (SLOG2, SLOG3, LOGC, VLOG). Lut Import: Confirm. Lut Table: Shows 4 built-in LUTs and custom loaded LUTs (up to 32). |
| HDR | On/Off. Mode: HLG1, HLG2, HLG3. Provides greater dynamic range and details, reflecting visual effects in the real environment. |
| Display Adjustment | Backlight, Brightness, Contrast, Saturation, Tint (all 0-100). Adjusts screen and image parameters. |
| Color Adjustment | Display Range: Auto, Limit, Full. Selects grayscale range (16-235 or 0-255). Color Temp.: 5600K, 6500K, 9300K, User (adjust R, G, B 0-255). |
| Shortcut Key | Assign functions to F1, F2, F3 keys. Options include All Waves, Waveform, Vector, Histogram, Embedded Audio, Center Marker, Safe Frames, Grid, Focus Assist, False Colors, Zebra Pattern, Anamorphic, Image Freeze, Check Field, Zoom Mode, Image Flip, Aspect Ratio, Ratio Marker, LUT, Touch Switch. |
| Left Right Key Set | Volume, Backlight. |
| System | System settings. |
| User Switch | 1-4. Save and recall set menus. |
| Language | English, Simplified Chinese, Spanish, Portuguese, French, Dutch, German, Japanese, Traditional Chinese, Korean, Russian, Italian. |
| OSD Option | OSD Time: Off, 15Sec, 30Sec, 45Sec. OSD Trans: Off, 25%, 50%, 75%. No Signal: Red, Green, Blue, Black, White, Gray. |
| EDID Settings | 2.0, 1.4. Compatible with different camera/device resolutions. Default to 2.0. |
| Volume | 0-100. Adjusts speaker volume. |
| Cooling Fan | ON, OFF. Mode: 1-5. Default to ON with 3 modes. |
| Power Settings | Power on: Auto, Manual. Reset: Select Reset and press MENU button Confirm to return to original settings. |
| Firmware Update | Firmware Version (displays version number). Firmware Update: Confirm. |
How to Import Custom LUT
- USB flash drive format: Supports FAT32.
- Max Files Limit: Maximum 32 LUT files.
- File requirements:
- The LUT file format suffix should be
.cube. - Single file not to exceed 7.9Mb.
- Support LUT-3D-Size 16, 17, 32, 33, 64, 65.
- The LUT file format suffix should be
Remark: LUT file names must be English or Arabic numerals.
Steps for loading
- Make sure the USB flash drive is correctly connected to the monitor via the accompanied USB-A to USB-C adapter.
- Enter the main menu: 'User Option' -> 'LUT' -> 'LUT Import' -> 'Confirm' to load. The monitor will auto-detect the USB flash drive.
If there is a valid LUT file on the USB flash drive, the monitor will load LUT files and show '[n] name'. '[n]' shows the quantity number. The 'name' should be the LUT file's name. If loading is successful, the screen will show 'complete[n]'. '[n]' stands for the quantity number for LUT files, which should be under 32.
PS: How to clear up the imported LUTs?
Insert an empty USB flash drive into the monitor, enter the main menu 'User Option' -> 'LUT' -> 'LUT Import' -> 'Confirm'. The imported LUTs will be cleared.
Firmware Update
We generally do not recommend upgrading casually. If an upgrade is truly needed, please contact after-sales support or another person to obtain the relevant upgrade file.
- Use a USB flash drive formatted with FAT32. Copy the upgrade file to the USB flash drive, then insert it into the USB-A port of the USB-A to USB-C adapter.
- Turn on the monitor, insert the USB-A to USB-C adapter into the Type-C port of the monitor.
- Enter the menu, select 'System' -> 'Firmware Update' -> 'Update', click 'Confirm' to start the upgrade.
- The monitor will shut down automatically when finished. Please reboot manually.
- Check whether the latest version is installed.
Remark: Please keep the device powered on throughout the entire upgrading process.
Maintenance
Regular Maintenance Checks
- Check for dust accumulation on the interfaces.
- Ensure the equipment voltage is stable.
- Confirm that the wire is not damaged or bent.
- Verify that the fixing device is securely fastened.
- Ensure all screws are securely fastened.
These measures can significantly reduce the risk of equipment damage and extend its service life.
Troubleshooting
11.1. Only black and white or monochrome picture
- Please check saturation, brightness & contrast adjustment.
- Please check if "Check Field" is set to black, white, or monochrome image or other condition.
11.2. No Image after powering on
- Check if the signal cable connection is in good condition, and if the monitor is synchronized with the input signal.
- Check the signal cable connection, and make sure to use the standard adapter to connect the monitor. If power is supplied by battery, please check if the battery is fully charged.
11.3. No sound
- Check if Volume control is not open; try to increase the volume.
- Check if the signal input source is normal or not.
If there are still other problems, please contact our related technologists.
As we are improving product features and product performance, specifications may change without prior notice.
Specifications
| Parameter | Value |
|---|---|
| Panel Size | 6" IPS |
| Resolution | 1920x1080 pixels |
| Dot Pitch | 0.069(L) x 0.069(W) mm |
| Aspect Ratio | 16:9 |
| Brightness | 1500cd/m² |
| Contrast | 1000:1 |
| Viewing Angle | 80°/80°(L/R) 80°/80°(U/D) |
| Backlight | LED |
| Response Time | Ton+Toff=35ms |
| Input | 3G-SDI, HDMI 2.0, USB-C (LUT file import and Firmware update) |
| Output | 3G-SDI, HDMI 2.0, 3.5mm Stereo Headphone |
| Power Input | DC IN 12V, Barrel (5.5mm outer, 2.1mm inner) |
| Power Output | DC OUT 8.4V, Barrel (5.5mm outer, 2.1mm inner) (Can power DSLR or mirrorless camera) |
| Battery Slot | NP-F Battery Slot |
| Power Consumption | ≤18W |
| Unit Size | 165x103x28.8 (mm) |
| Unit Weight | 398g |
| Mount Points | 1/4"-20 Thread Point (Top, Right side, Bottom) |
| Working Temperature | -20℃ ~ 50℃ |
| Storage Temperature | -30℃ ~ 60℃ |
| HDMI Support Format | 1080p (60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF), 4K UHD 3840×2160p (30/29.97/25/24/23.98), 1080i (60/59.94/50), 720p (60/59.94/50/30/29/25/24/23.98), 480i/480p/576i/576p |
| SDI Support Format | 1080p (60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF), 1080i (60/59.94/50), 720p (60/59.94/50/30/29/25/24/23.98) |
User Tips
- For optimal outdoor visibility, utilize the 1500nit brightness and consider attaching the portable sun-hood to minimize glare.
- When using the monitor with different cameras, remember to check and adjust the EDID settings (2.0 or 1.4) for best compatibility.
- Take advantage of the custom 3D LUT feature to preview your desired film look directly on set. Ensure your LUT files are in .cube format and meet the size requirements for smooth import.
- Familiarize yourself with the touch screen gestures for quick adjustments to backlight and volume, and assign frequently used functions to the F1-F3 shortcut keys for efficient workflow.
- Regularly check cable connections and battery charge to avoid interruptions during shooting.
Warranty & Support
For any technical assistance, warranty claims, or to obtain relevant upgrade files for firmware, please contact FEELWORLD customer support or your authorized dealer.
A detailed user manual in PDF format is also available for download: User Manual (PDF)