HITBOX HT111

Contents

HITBOX HT111 Automatic Dimming Welding Helmet

User Instruction Manual

Model: HT111 | Brand: HITBOX

1. Introduction

The HITBOX HT111 is a professional-grade automatic dimming welding helmet designed to provide superior eye and face protection during various welding processes, including MIG, ARC, and TIG welding. Featuring advanced true color technology, a wide viewing lens, and rapid auto-darkening capabilities, this helmet ensures both safety and clarity for the user. Its durable PP material construction offers resistance against wear, shock, corrosion, and heat, making it a reliable tool for demanding welding environments.

HITBOX HT111 Welding Helmet front view

Figure 1: HITBOX HT111 Welding Helmet

2. Safety Information

Always read and understand all safety warnings and instructions before using this product. Failure to follow these instructions may result in serious injury.

  • Eye Protection: This helmet is designed to protect your eyes and face from sparks, spatter, and harmful radiation under normal welding conditions. It is not suitable for laser welding or oxyacetylene welding/cutting applications.
  • Impact Protection: The helmet is not an impact-resistant headgear. Always wear appropriate ANSI Z87.1 approved safety glasses underneath the helmet.
  • Inspection: Before each use, inspect the helmet for any damage, cracks, or loose parts. Replace any damaged components immediately.
  • Ventilation: Ensure adequate ventilation in your work area to avoid inhaling hazardous fumes and gases produced during welding.
  • Temperature: Do not use the helmet outside its specified operating temperature range (-5°C to +55°C).
  • Modifications: Never modify the helmet or its components. Unauthorized modifications can compromise safety and void the warranty.
  • Cleaning: Use only mild soap and water for cleaning. Avoid harsh solvents that may damage the helmet material or lens.
Welding helmet durability features: wear, shock, corrosion, and heat resistant PP material

Figure 2: PP Durable Material Features

3. Package Contents

Verify that all items listed below are included in your package:

  • HITBOX HT111 Welding Helmet (1x)
  • Extra Protection Lens (1x)
  • Replaceable CR2450 Battery (2x)
  • User Manual (1x)
Accessories included with the welding helmet: extra protection lens, two CR2450 batteries, and a user manual

Figure 3: Included Accessories

4. Specifications

Feature Specification
Model HT111
Power Supply Li-battery & Solar
Battery Type CR2450 (replaceable)
Battery Capacity 600mAh
Viewing Area 3.66" x 1.69"
Arc Sensor 2 pcs
UV/IR Protection DIN 16
Light State DIN 4
Dark State DIN 9-13
Switch Time 1/30000s (0.04ms)
Delay Control 0.1-1.0s
Way to Shift Dark State Outer Stepless Shift
Operating Temperature -5°C to +55°C
Low Battery Tip LED Indication
Test Function Yes
Grind Function Yes
Welding Process MMA, MIG/MAG, TIG
Helmet Material PP
Weight 0.86 lbs
Certification CE, ANSI Z87.1, CSA Z94.3
Detailed specifications of the HT111 welding helmet, including viewing area, arc sensors, UV/IR protection, light and dark states, switch time, and power supply.

Figure 4: HT111 Product Specifications

5. Setup

5.1 Headgear Adjustment

Proper adjustment of the headgear is crucial for comfort and stability during welding. The HT111 features multiple adjustment points:

  1. Comfort Cushion: Position the comfort cushion for optimal padding against your forehead.
  2. Adjust Top Strap: Use the top strap to adjust the helmet's height and distance from your face.
  3. Width Knob: Rotate the width knob at the back of the headgear to tighten or loosen the fit around your head.
  4. Angel Knob: Adjust the angle knob on the sides to set the helmet's tilt when in the down position.
Diagram showing the adjustable components of the welding helmet headgear: comfort cushion, top strap, width knob, and angel knob.

Figure 5: Headgear Adjustment Points

5.2 Battery Installation

The helmet is powered by a combination of solar cells and two replaceable CR2450 lithium batteries. The batteries are typically pre-installed, but if replacement is needed:

  1. Locate the battery compartment, usually on the auto-darkening filter (ADF) cartridge.
  2. Open the compartment and replace the old CR2450 batteries with new ones, ensuring correct polarity.
  3. Close the compartment securely.

5.3 Protection Lens Installation

The helmet comes with an extra protection lens. Install it over the main auto-darkening filter to protect it from scratches and spatter. Refer to the specific instructions on the ADF cartridge for proper placement and securing.

6. Operating Instructions

6.1 Controls Overview

Familiarize yourself with the controls on the auto-darkening filter (ADF) cartridge:

  • TEST Button: Press to check if the auto-darkening function is working correctly. The lens should momentarily darken.
  • Low Battery Light: An LED indicator that illuminates when the batteries need replacement.
  • Sensitivity Knob: Adjusts the sensitivity of the arc sensors to detect the welding arc. Higher sensitivity is needed for low amperage welding or when the arc is partially obscured.
  • Delay Time Knob: Controls the time it takes for the lens to return from dark state to light state after welding stops. This prevents eye strain from afterglow.
  • Shade Control Knob (DIN 4/9-13): Located on the side of the helmet, this knob allows you to manually select the desired dark shade level (DIN 9-13) for welding or set it to DIN 4 for grind mode.
Diagram of the welding helmet lens controls, including TEST button, Low Battery Light, Sensitivity Knob, Delay Time Knob, Lithium Battery, Solar Cell, Arc Sensors, and Shade Control Knob.

Figure 6: Lens Specifications and Controls

6.2 Welding Mode

In welding mode, the helmet automatically darkens to a selected shade (DIN 9-13) when an arc is detected. The light state is DIN 4.

  1. Set the Shade Control Knob to the desired DIN level (9-13) based on your welding process and current (refer to the Shade Number Selection table below).
  2. Adjust the Sensitivity Knob to ensure the helmet darkens reliably when the arc is struck.
  3. Adjust the Delay Time Knob to your preference for the lens to return to clear after welding.
  4. The helmet will switch from light to dark in 1/30000 seconds (0.1-0.8s adjustable delay).
Comparison of helmet view before welding (clear) and during welding (auto-darkened), illustrating the fast darkening feature.

Figure 7: Before and During Welding View

6.3 Grind Mode

For grinding operations, the helmet can be set to a permanent light state (DIN 4) to protect your face from debris without darkening.

  1. Set the Shade Control Knob to DIN 4. This will disable the auto-darkening function.
  2. Ensure the helmet is securely fitted before beginning grinding.
Comparison of Grind Mode (Light State DIN 4) and Weld Mode (Light State DIN 4, Dark State DIN 9-13) with visual examples of different DIN levels.

Figure 8: Grind Mode vs. Weld Mode

6.4 Shade Number Selection Table

Use the following table as a guide for selecting the appropriate shade number based on your welding process and current (A):

Process Current (A)
5 10 15 30 40 70 100 125 175 200 250 300 350 400 500 600
MMA 9 10 11 12 13 14
MAG 10 11 12 13 14
TIG 9 10 11 12 13 14
MIG 10 11 12 13 14
PAC 11 12 13 14
PAW 9 10 11 12 13

Figure 9: Shade Number Selection Guide

Table showing recommended shade numbers for various welding processes (MMA, MAG, TIG, MIG, PAC, PAW) across different current amperages.

7. Maintenance

7.1 Cleaning the Helmet and Lens

  • Clean the helmet shell with a mild soap and water solution. Avoid abrasive cleaners or solvents.
  • Wipe the auto-darkening filter (ADF) and protection lenses with a soft, clean cloth. Do not use harsh chemicals or abrasive materials that could scratch the lens surface.
  • Regularly check the arc sensors for any obstructions or dirt and clean them gently.

7.2 Battery Replacement

When the Low Battery Light illuminates, replace the CR2450 batteries promptly to ensure proper functioning of the auto-darkening feature. Refer to section 5.2 for installation steps.

7.3 Storage

Store the helmet in a dry, clean place away from direct sunlight and extreme temperatures. Protect the lens from scratches during storage.

8. Troubleshooting

  • Helmet not darkening:
    • Check if the batteries are installed correctly and have sufficient charge. Replace if necessary.
    • Ensure the arc sensors are clean and unobstructed.
    • Adjust the sensitivity setting to a higher level.
    • Verify that the helmet is not in Grind Mode (Shade DIN 4).
  • Poor visibility through the lens:
    • Clean the inner and outer protection lenses and the ADF cartridge.
    • Replace scratched or damaged protection lenses.
    • Ensure the true color technology is functioning as expected.
  • Helmet feels uncomfortable or unstable:
    • Re-adjust the headgear using the top strap, width knob, and angel knob for a snug and balanced fit.
    • Ensure the comfort cushion is properly positioned.

9. User Tips

No specific user tips were available from reviews or Q&A for this product at this time. Always refer to the operating instructions and safety guidelines for best practices.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the HITBOX customer service department or the authorized dealer from whom you purchased the product. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.