EFT 50L/Z50

Contents

EFT Spray Tank 50L/Z50 Instruction Manual

For Z50 Agricultural Sprayer Drone Parts

1. Introduction

This manual provides essential instructions for the proper installation, operation, and maintenance of the EFT Spray Tank 50L/Z50, designed as a replacement part for Z50 Agricultural Sprayer Drones. Please read this manual thoroughly before use to ensure safe and efficient operation.

Warm Notice: This accessory is only used for REPAIR and REPLACEMENT of EFT drones. NO Technical support for accessories. If you have any questions, please contact online service before placing an order.

Repair Part For EFT Drones

2. Specifications

AttributeValue
Brand NameEFT
Model50L/Z50
Capacity50 Liters
Core ComponentsFrame
Warranty of Core Components1 year
Machinery Test ReportProvided
Video Outgoing-InspectionProvided
Marketing TypeFactory direct sale
Key Selling PointsLarge Load
Warranty1 year
FeatureFarm tools, Automatic Flight
Sprayer TypeFrame
Applicable IndustriesAgriculture
UsagePesticide sprayer
OriginMainland China (China-Anhui)
ConditionNew
KeywordsPayload Long Distance Drone, Crop Spraying Drone
TypeCrop Spraying Drone
FunctionGeoponics irrigation
Package Length63 cm
Package Width42 cm
Package Height45 cm
Package Weight15.0 kg

Product Views

EFT Spray Tank, front view
Front View
EFT Spray Tank, top view with two openings
Top View with Fill Ports
EFT Spray Tank, side view
Side View
EFT Spray Tank, rear view
Rear View
Close-up of the tank's top openings with covers
Top Fill Port Detail

3. Setup and Assembly

The EFT Spray Tank is designed for easy integration with the Z50 Agricultural Sprayer Drone. The following steps outline the general assembly process. For detailed visual guidance, please refer to the product assessment video below.

3.1 Unboxing and Component Identification

Upon receiving your drone kit, carefully unbox all components. The video demonstrates the typical contents:

  1. Drone Kits: Main drone body and associated parts.
  2. Spreading Tank: The 50L spray tank.
  3. Motor Set: Drone motors.
  4. Spreader: Granular spreader component (if applicable to your drone configuration).

3.2 Assembly Steps

The assembly process involves attaching the various components to the drone frame. Key steps include:

  1. Open Box: Carefully open the main packaging, often secured with banding straps.
  2. Arm Parts: Install the drone's arm parts.
  3. Drone Body and Tank: Integrate the spray tank with the drone body. Ensure secure fitting.
  4. Double Impeller Pump: Connect the double impeller pump to the tank and drone's spray system.
  5. Landing Gear: Attach the landing gear components. The video highlights the easy assembly of these parts using screws.
  6. Front and Rear Cabin Connections: Ensure all electrical and control connections in the front and rear cabins are properly secured.

Note: This spray tank is intended for use with the Z50 Agricultural Sprayer Drone. Ensure compatibility and follow the drone's main assembly instructions for complete setup.

3.3 Product Assessment and Assembly Video

Video demonstrating the unboxing, assembly, and initial tests of the Z30/Z50 drone system, including the spray tank.

4. Operating Instructions

The EFT Spray Tank functions as the reservoir for agricultural liquids. Its operation is integrated with the Z50 Agricultural Sprayer Drone's control system.

4.1 Filling the Tank

  1. Ensure the drone is powered off and stable on a level surface.
  2. Open the top fill ports of the spray tank (refer to "Top Fill Port Detail" image in Specifications).
  3. Carefully pour the desired agricultural liquid (pesticide, fertilizer, etc.) into the tank, observing the maximum fill level.
  4. Securely close the fill port covers to prevent spills during operation.

4.2 Integrated Spray System Operation

Once the tank is filled and securely mounted, the spray function is controlled via the Z50 drone's flight controller. Refer to your Z50 drone's main operating manual for specific instructions on:

  • Activating the spray pump.
  • Adjusting spray rates and patterns.
  • Programming flight paths for automated spraying.

The product assessment video includes demonstrations of a "Spray test" and "Flight test" to show the integrated system in action.

5. Maintenance

Regular maintenance of the spray tank is crucial for its longevity and efficient operation.

5.1 Cleaning

  • After each use, especially when changing liquid types, thoroughly rinse the tank with clean water.
  • For stubborn residues, use appropriate cleaning agents recommended for agricultural spray equipment, ensuring they are compatible with the tank material.
  • Drain all cleaning solutions completely and rinse again with clean water.

5.2 Inspection

  • Periodically inspect the tank for any cracks, leaks, or damage.
  • Check the integrity of the fill port covers and their seals.
  • Ensure all connections to the pump and drone system are secure and free from corrosion.

5.3 Storage

  • When not in use, store the tank in a clean, dry place, away from direct sunlight and extreme temperatures.
  • Ensure the tank is empty and clean before long-term storage.

6. Troubleshooting

This section addresses common issues you might encounter with the spray tank. As this is an accessory, many operational issues will be related to the main drone system.

6.1 Common Issues

  • No Spray/Low Pressure:
    • Check if the tank contains sufficient liquid.
    • Ensure the pump is correctly connected and powered.
    • Inspect for blockages in the pump or spray nozzles (refer to drone manual).
    • Verify all hoses and connections are secure and not leaking.
  • Leaking Tank:
    • Check the fill port covers are tightly sealed.
    • Inspect the tank body for visible cracks or damage.
    • Examine connections to the pump and hoses for loose fittings or damaged seals.

For issues related to the drone's flight or electronic controls, please consult the Z50 Agricultural Sprayer Drone's dedicated manual.

If you encounter problems that cannot be resolved using this guide or the drone's manual, please contact EFT Drone Official Store's online service for assistance.

7. Warranty and Support

7.1 Warranty Information

The core components of the EFT Spray Tank 50L/Z50 are covered by a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and material faults under normal use conditions. Please retain your proof of purchase for warranty claims.

7.2 Customer Support

For any questions, technical assistance, or warranty claims, please contact the EFT Drone Official Store's customer service. As stated in the product notice, direct technical support for accessories may be limited, but the official store can guide you on repair and replacement procedures.

You can typically find contact information on the seller's store page or through the platform's messaging system.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.