SPORTARC LCD Display Meter with Thumb Throttle

Contents

E-bike LCD Display Meter User Manual

Model: LCD Display Meter with Thumb Throttle | Brand: SPORTARC

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your SPORTARC E-bike LCD Display Meter. Please read this manual thoroughly before use to ensure safe and efficient operation of your device.

2. Safety Warnings

  • WARNING: Stay away from children and avoid misoperation.
  • WARNING: Please do not disassemble or modify this product by yourself. Non-professional repairs may cause damage or safety accidents.
  • Do not use the product in damp or dusty environments.
  • Avoid severe impact or vibration on the product.

3. Product Overview and Features

The SPORTARC E-bike LCD Display Meter is designed to provide essential information for your electric bicycle or scooter. It features a durable ABS material construction and integrates a thumb throttle for convenient control.

Key Features:

  • LCD display for clear visibility.
  • Integrated thumb throttle.
  • Voltage compatibility: 24V, 36V, 48V, 52V, 60V, 72V (user-adjustable).
  • Available in 6-pin and 8-pin configurations.

Display Functions:

Instrument Display Function Overview
Figure 3.1: Instrument Display Function Overview
This diagram illustrates the various data points shown on the LCD display.
  • Speedometer Display: Shows current speed in km/h. The faster the speed, the larger the displayed number.
  • Battery Level Display: Indicates remaining battery charge. One bar represents 25% battery level.
  • Single Trip Distance Display: Shows the distance covered in the current trip. Resets to zero after single trip shutdown.
  • Voltage Display: Shows the current voltage (adjustable for 24V, 36V, 48V, 60V, 72V systems).
  • Total Distance Display: Shows the total accumulated distance. This value does not reset after shutdown.
  • Gear Display: (Available only on 8-pin models) Shows the current gear. On 8-pin models, clicking the 'M' button can adjust the gear. The 6-pin display does not have this function.

4. Specifications

AttributeValue
Product Name24-72V Speed Display for E-Bike and Scooter
BrandSPORTARC
MaterialABS
Dimensions (approx.)77mm (width) x 72mm (depth) x 83mm (height)
ColorBlack
Voltage Compatibility24V, 36V, 48V, 52V, 60V, 72V (adjustable)
Pin Configuration6-pin or 8-pin
OriginMainland China
Dimensional drawing of the display meter
Figure 4.1: Product Dimensions
Detailed measurements of the E-bike LCD Display Meter.

5. Installation and Wiring

Before installation, ensure all accessories are complete after unboxing. The display meter is designed for handlebar mounting and includes an integrated thumb throttle.

Wiring Instructions:

Carefully connect the wires according to the color codes provided below. Incorrect wiring can damage the device or your e-bike/scooter system.

Wiring diagrams for 6-wire and 8-wire configurations
Figure 5.1: 6-wire and 8-wire Wiring Diagrams
This image shows the specific wire colors and their corresponding functions for both display types.
Wire ColorFunctionNotes
Red Cable+5V Input
Green CableHall Signal Line
Black CableHall Negative Pole
White CableBattery Positive Input to Lock
Yellow CableBattery Positive Output from Lock
Brown CableHall/Phase Line Speed Measurement Line
Dark Blue CableGear LineAdditional line for 8-pin display only
Light Blue CableGear LineAdditional line for 8-pin display only
E-bike LCD Display Meter with thumb throttle
Figure 5.2: Display Meter with Thumb Throttle
The display meter is designed for easy mounting on your e-bike or scooter handlebar.

6. Operating Instructions

Once installed and wired correctly, the display meter will power on with your e-bike/scooter. Refer to the display functions section for an overview of the information presented.

Basic Operation:

  • The display will automatically show battery level, speed, and mileage upon startup.
  • For 8-pin displays, press the 'M' button to cycle through or adjust gears.
  • The thumb throttle provides speed control.

7. Parameter Adjustment

The display allows for internal parameter adjustment, such as setting the speed measurement method.

Parameter Adjustment for P3 setting
Figure 7.1: Parameter Adjustment Interface
This image shows the display during parameter adjustment, specifically for the P3 setting.

Steps for Parameter Adjustment:

  1. After starting the meter, hold the 'M' button for 2 seconds to enter internal parameter adjustment.
  2. Locate the 'P3' setting. This parameter determines the speed measurement method:
    • If P3 is set to 1: The speed line is connected to the controller's phase line (Phase Line Speed Measurement).
    • If P3 is set to 2: The speed line is connected to the controller's Hall line (Hall Speed Measurement).
  3. Adjust other parameters as needed, referring to the full operation manual for detailed descriptions of each setting.

8. Maintenance

To ensure the longevity and optimal performance of your LCD Display Meter, follow these maintenance guidelines:

  • Keep the display clean and free from dust and dirt. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to excessive moisture or direct water spray.
  • Protect the display from severe impacts or vibrations, which can damage internal components.
  • Store the e-bike/scooter in a dry, temperate environment when not in use.

9. Troubleshooting

If you encounter issues with your display meter, consider the following basic troubleshooting steps:

  • Display not turning on: Check all wiring connections to ensure they are secure and correctly matched. Verify the e-bike/scooter's battery is charged and providing power.
  • Incorrect speed reading: Ensure the P3 parameter is correctly set for your controller's speed measurement method (Phase Line or Hall Line).
  • Inaccurate battery level: Confirm the display's voltage setting matches your e-bike/scooter's battery voltage (24V, 36V, 48V, etc.).
  • Throttle not responding: Check the throttle wiring for any loose connections.

For persistent issues, consult a professional e-bike technician or refer to the comprehensive PDF user manual available here.

10. Warranty and Support

For warranty information and technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

A detailed user manual in PDF format is available for download, which may contain additional setup and troubleshooting information. You can access it via this link: E-bike LCD Display Meter User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.