1. Introduction
Thank you for choosing the POSEIDON Wireless Tattoo Pen. This device is designed for professional tattoo artists, offering quiet stability, a powerful motor, and a comfortable, anti-slip design for extended use. This manual provides detailed instructions for safe and effective operation, maintenance, and troubleshooting.
2. Safety Information
WARNING: To avoid danger of suffocation, keep this plastic bag away from babies and children. Do not use this bag in cribs, beds, carriages or play pens. This bag is not a toy.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- The appliance must only be supplied at safety extra-low voltage corresponding to the marking on it.
3. Specifications
| Feature | Specification |
|---|---|
| Model Item | HM135 |
| Brand Name | POSEIDON |
| Type | Tattoo Kits |
| Material | Aerospace-grade Aluminum Alloy |
| Technology | Five-axis precision CNC machining |
| Motor | Japanese motor, 8V/8000 U/min |
| Principle | Direct-drive long-axis |
| Stroke Length (Hub) | 4.0 mm |
| Needle Length | 1 mm - 4.2 mm |
| Output Voltage | 4-12 V |
| Working Frequency | 11000 RPM |
| Battery Capacity | 2300 mA (Is Batteries Included: Yes) |
| Grip Distance | 42 mm |
| Charging Port | Type-C |
| Charge Time | 2-3 hours |
| Working Duration | 4-6 hours |
| Color | Yellow |
| Origin | Mainland China |
4. Setup
4.1 Charging the Device
The POSEIDON Wireless Tattoo Pen features a Type-C charging port. Connect the provided Type-C cable to the device and a suitable power source. The display will show a charging symbol. A full charge typically takes 2-3 hours, providing 4-6 hours of working duration.
4.2 Attaching the Needle Cartridge
Ensure the device is powered off before attaching or detaching needle cartridges. Carefully insert the needle cartridge into the pen until it clicks securely into place. The pen is designed with an aluminum alloy protective layer at the interface for a tight and wear-resistant connection.
5. Operating Instructions
The tattoo pen is controlled via the power button and the plus/minus ('+') and ('-') function buttons, and the 'M' key.
5.1 Power On/Off and Basic Operation
- **Power On/Off**: Press and hold the power button for 1.5 seconds to turn the machine on or off.
- **Start/Pause**: After powering on, press the power button to activate the motor and start the timer. Press it again to pause the machine. Press again to resume.
- **Battery Status Display**: Each time you activate the motor, the battery symbol will be displayed on the screen.
5.2 Adjusting Voltage and Speed
- **Voltage Adjustment**: Use the plus ('+') and minus ('-') buttons to adjust the voltage in 0.1V increments. Press and hold for continuous adjustment. The voltage range is between 4.0V and 12.0V. The default starting voltage is 8V.
5.3 Memory Modes and Special Functions
- **Memory Function**: The device will display the active mode and gear upon startup, restoring the previously set speed or gear.
- **Display Auto-Off/Sleep Mode**: The display automatically turns off after 10 seconds of inactivity. The device enters sleep mode after 5 minutes of inactivity.
- **Low Battery Reminder**: When the battery status reaches 79%, the battery status will blink as a reminder.
- **Forced Start Mode**: After starting the device, double-press the 'M' key to switch to forced start mode. The highest speed will be maintained for 0.5 seconds, then it will return to the set speed. The forced start symbol will be displayed.
- **Switching Needle Output (Prick Function)**: Press and hold the 'M' key to switch to the prick function (e.g., 40 NPS). Hold the 'M' key again to switch back to normal needle output (e.g., 131 HZ).
- **Clamping Mode**: Press the 'M' key to switch between clamping mode and normal mode. In clamping mode, use the plus/minus buttons to set the clamping frequency (e.g., 20NPS10HZ).
- **Function Keys Setup**: The function keys offer two options. The broadcast option can only be selected when the unit is on. Use the plus/minus buttons to set the needle length or frequency. The setting can be changed by rotating the function knob. Press the power button to exit the setting, or hold it down for 5 seconds for automatic setup.
5.4 Using the Tattoo Pen
Once the needle cartridge is attached and the desired settings are configured, the tattoo pen is ready for use. Ensure proper hygiene and safety protocols are followed during tattooing.
6. Maintenance
6.1 Cleaning
Regular cleaning of your tattoo pen is crucial for hygiene and longevity. After each use, carefully wipe down the exterior of the machine with a suitable disinfectant. Ensure no liquids enter the internal components. Always follow professional sterilization guidelines for all tattoo equipment.
6.2 Storage
Store the tattoo pen in a clean, dry, and safe place away from direct sunlight, extreme temperatures, and moisture. Keep it out of reach of children.
7. Troubleshooting
| Problem | Error Code / Indication | Possible Cause | Solution |
|---|---|---|---|
| Motor not running or stopping unexpectedly | E1 | Motor locking or overload protection activated | Check for any obstructions to the needle or motor. Reduce pressure if overloading. Restart the machine. |
| Device shuts down or malfunctions due to electrical issue | E2 | Overcurrent protection activated | Ensure the power source is stable and within specifications. Disconnect and reconnect the device. If the problem persists, contact support. |
| Display turns off, device unresponsive | No display | Device in sleep mode or battery low | Press any button to wake from sleep mode. Check battery level and charge if necessary. |
| Automatic threading/unthreading occurs | N/A | No operation for 5 minutes | This is a normal function. Simply restart operation. |
8. User Tips
- **Power On Current**: For optimal performance, ensure the power on current is below 2A.
- **Comfortable Grip**: The new hand-slip anti-slip design provides a comfortable pen grip. Utilize this for better control and to reduce fatigue during long sessions.
- **Needle Stability**: The strong movement motor ensures needle stability, which is crucial for precise work.
- **Versatility**: This pen is suitable for various embroidery tattoo applications.
9. Warranty and Support
For any questions, technical assistance, or warranty claims, please refer to your purchase documentation or contact the seller directly. Keep your proof of purchase for any service requests.
A user manual in PDF format is also available for download: View User Manual (PDF)
