HOTA T8 Ultra

Contents

HOTA T8 Ultra GaN Smart Charger User Manual

Model: T8 Ultra

1. Product Overview

The HOTA T8 Ultra GaN Smart Charger is a high-performance AC/DC balance charger utilizing advanced Gallium Nitride (GaN) and Silicon Carbide (SiC) technology. It is designed for a wide range of battery types, including LiPo, Li-ion, LiFe, LiHv, Lixx, LTO (1-8S), NiZn, NiCd, NiMH (1-20S), PB (1-12S), and Eneloop (1-20S). With a maximum charging power of 650W (DC) or 300W (AC), it provides efficient and safe charging for various RC models.

HOTA T8 Ultra GaN Smart Charger in use, displaying charging parameters.

Figure 1: HOTA T8 Ultra GaN Smart Charger in operation.

Key features include a 2.8-inch IPS color screen for clear status display, a compact and lightweight design, and a comprehensive ten-layer built-in safety protection system.

2. Package Contents

Please check the package contents upon unboxing:

  • HOTA T8 Ultra GaN Smart Charger Unit
  • AC Power Cable (if included with specific region variant)
  • User Manual (this document)

3. Device Layout and Ports

Familiarize yourself with the charger's layout and connection ports:

Diagram illustrating the ports and keys on the HOTA T8 Ultra charger, including AC/DC input, output, balance, multi-function, USB, fan, and control keys.

Figure 2: HOTA T8 Ultra Charger Port Diagram.

  • AC In Port: Connect the AC power cable for mains power.
  • DC In Port: Connect a DC power source (e.g., a power supply or car battery).
  • Output Port: Main charging output (e.g., XT60 connector).
  • Balance Port: Connect battery balance lead for cell balancing.
  • Multi-Function Port: Can be used for testing steering gears or other functions.
  • USB Port (5V/Update Port): For firmware upgrades and 5V/2.1A USB output.
  • Fan: Cooling fan for temperature management.
  • Speed Shuttle Key: Navigation and selection control.
  • Exit Key/Multi-Function Key: Back/exit function and other controls.

4. Setup and First Use

Follow these steps to set up your HOTA T8 Ultra charger:

  1. Power Connection:
    • For AC power: Connect the provided AC power cable to the "AC In Port" on the charger and then to a suitable wall outlet (100-240V AC).
    • For DC power: Connect a DC power source (7.0-35.0V, max 27A) to the "DC In Port" using an appropriate cable.
  2. Power On: The charger should power on automatically once connected to a power source. The IPS screen will display the main interface.
  3. Initial Settings: Use the "Speed Shuttle Key" and "Exit Key/Multi-Function Key" to navigate through the menu. You may need to set basic parameters like language or system preferences if prompted.

5. Operating Instructions

The HOTA T8 Ultra offers various charging and discharging modes. Always ensure correct battery type and settings before starting any operation.

5.1. Charging a Battery

  1. Connect Battery:
    • Connect the main power lead of your battery to the "Output Port" (e.g., XT60).
    • For LiPo/Li-ion/LiFe/LiHv batteries, also connect the balance lead to the "Balance Port". This is crucial for safe and balanced charging.
  2. Select Task: From the main screen, use the navigation keys to select "Task" or the appropriate charging mode (e.g., LiPo Charge, LiPo Balance, Storage).
  3. Set Battery Parameters:
    • Battery Type: Select the correct chemistry (e.g., LiPo, Li-ion, NiMH).
    • Cell Count (S): For lithium batteries, set the correct cell count (e.g., 3S, 4S, 6S). The charger supports up to 8S for lithium batteries.
    • Charge Current (A): Set the desired charging current. A common recommendation is 1C (e.g., for a 5000mAh battery, set 5.0A).
  4. Start Charging: Confirm your settings and initiate the charging process. The screen will display real-time charging status, including current, voltage, power, and individual cell voltages (for balanced charging).
HOTA T8 Ultra charger user interface displaying different charging statuses, including charging and storage discharging.

Figure 3: Charger screen showing various charging and discharging statuses.

5.2. Discharging and Storage Mode

The charger supports discharging and a dedicated storage mode to bring batteries to a safe voltage for long-term storage.

  1. Connect the battery as described for charging.
  2. Select "Storage" or "Discharge" from the task menu.
  3. Set the desired discharge current or confirm the storage voltage.
  4. Start the process.

6. Maintenance and Safety

Proper maintenance ensures the longevity and safe operation of your charger.

  • Cleaning: Keep the charger clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use solvents or abrasive cleaners.
  • Ventilation: Ensure the cooling fan and vents are unobstructed during operation to prevent overheating. The charger features smart temperature control to maintain optimal operating conditions.
  • Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures (-20~60℃ storage temperature, 0~40℃ operating temperature).
  • Safety Protections: The HOTA T8 Ultra is equipped with a ten-layer safety protection system, including:
    • Short circuit protection
    • Overheat protection
    • Over power protection
    • Reverse connection protection
    • Capacity protection
    • Time protection
    • Low voltage protection
    • High voltage protection
    • Overcurrent protection
    • VO standard flame retardant material
    HOTA T8 Ultra charger highlighting its ten-layer built-in safety protection features with icons for each protection type.

    Figure 4: Ten-layer built-in safety protection system.

  • Firmware Updates: Periodically check the manufacturer's website for firmware updates to ensure optimal performance and access to new features. Updates can typically be performed via the USB Port.

7. Troubleshooting

If you encounter issues with your HOTA T8 Ultra charger, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Charger does not power on.No power supply or incorrect connection.Check AC/DC power cable connections. Ensure power source is active and within specified voltage range.
Charging error message on screen.Incorrect battery settings, faulty battery, or connection issue.Verify battery type, cell count, and current settings. Check all battery connections (main and balance leads). Inspect battery for damage.
Charger gets excessively hot.Poor ventilation or operating in high ambient temperature.Ensure vents are clear. Operate in a well-ventilated area. Reduce charging current if necessary.
Balance charging not working.Balance lead not connected or damaged.Ensure the balance lead is securely connected to the "Balance Port". Check the balance lead for any damage.
USB port not functioning.Incorrect cable or device, or firmware issue.Use a compatible USB cable. Ensure the connected device is drawing appropriate power. Try updating firmware.

If the problem persists, please contact customer support for further assistance.

8. Specifications

Detailed technical specifications for the HOTA T8 Ultra GaN Smart Charger:

FeatureSpecification
Input VoltageAC 100~240V, DC 7.0~35.0V @ MAX 27A
Charge PowerDC 0.1-22A @ 650W, AC 300W (Support power distribution)
Discharge Power0.1-22A @ 650W Recycle External, 0.1-3A @ 20W Normal mode
Balance Current1000mA @ 4.2V
Storage Temperature-20~60℃
Operating Temperature0~40℃
Screen Size2.8” IPS 320x240, 260000 colors
USB-A Output5V @ 2.1A Upgrade
Battery Type (Li-based)LiHv/LiPo/LiFe/Lilon/Lixx/LTO: 1~8S
Battery Type (Ni-based)NiZn/NiCd/NiMH: 1~20S
Battery Type (PB/Eneloop)PB: 1~12S, Eneloop: 1~20S
Measurer PWM880us-2200us @ 20-400Hz
Measurer PPM880us-2200us * 8CH @ 20-50Hz
Measurer SBUS880us-2200us * 16CH @ 20-100Hz
Measurer Voltage1.0V-5.0V @ 1-8S
Measurer Internal Resistance1-99mR @ 1-8S
Measurer ESC1-20A @ 1-35V MAX 650W
Output PWM500us-2500us @ 20-1000Hz
Output PPM880us-2200us * 8CH @ 50Hz
Output SBUS880us-2200us * 16CH @ 74Hz
Power Supply Output0.5-22A @ 1-35V mode: CC+CV
Dimensions119mm x 69.5mm x 64mm
Net Weight430g approximate

9. User Tips

  • Always double-check your battery type and cell count settings before starting a charge cycle to prevent damage to the battery or charger.
  • Utilize the balance charging feature for all lithium-based batteries to maximize their lifespan and performance.
  • Keep the charger's firmware updated to benefit from the latest features and improvements.
  • The compact size makes it highly portable; consider using a protective case for transport.

10. Warranty and Support

The HOTA T8 Ultra GaN Smart Charger is designed for reliability and performance. For any technical issues, questions, or support needs, please contact the retailer or manufacturer directly. Keep your proof of purchase for warranty claims.

For the latest information, FAQs, and support resources, please visit the official HOTA website.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.