1. Introduction
The HOTA S6 Ultra is a high-performance dual-channel smart charger designed for a wide range of RC battery types. Utilizing advanced GaN+SiC technology, it delivers efficient and safe charging with robust protection features. This manual provides essential information for the safe and effective operation, setup, and maintenance of your HOTA S6 Ultra charger.
2. Safety Information
Always read this manual completely before using the charger. Failure to do so may result in damage to the charger, batteries, or personal injury.
- Ensure proper ventilation during operation to prevent overheating.
- Always connect the correct battery type and cell count to avoid damage.
- Never leave the charger unattended while in use.
- Avoid short circuits and reverse polarity connections.
- Keep the charger away from moisture, direct sunlight, and extreme temperatures.
- The HOTA S6 Ultra features ten layers of protection for safe and reliable operation: Short circuit protection, Overheat protection, Over power protection, Reverse connection protection, Capacity protection, Time protection, Low-voltage protection, High voltage protection, Overcurrent protection, and V0 standard flame retardant material.

3. Package Contents
Please check the package contents upon receipt. If any items are missing or damaged, contact your retailer.
- HOTA S6 Ultra Dual Channel Smart Charger
- AC Power Cable (may vary by region/plug type)
- User Manual (this document)
4. Product Overview
The HOTA S6 Ultra is a compact and powerful charger. Familiarize yourself with its components and interfaces:



Key Features:
- Dual Channel Operation: Independently charge two batteries simultaneously.
- GaN+SiC Technology: Provides high thermal conductivity, good electrical conductivity, low energy consumption, good heat dissipation, higher frequency, smaller size, and higher efficiency, leading to a 2-3 times longer service life compared to ordinary chargers.
- Wide Voltage Range: Supports AC 100-240V input, enabling worldwide travel without limitation.
- High Balancing Current: Up to 1600mA per channel for precise cell balancing.
- Independent Output Interface: Features an XT60-F port for powering external appliances like FPV goggles or monitors.
- Compact Design: Tiny size for portability.
- Quiet Operation: Smart fan operates at low speed for efficient heat dissipation without excessive noise.






5. Specifications
| Feature | Specification |
|---|---|
| Input Voltage | AC 100~240V / DC 10.5-30V |
| Charge Power | DC 325W x 2 (@ input voltage > 25V), AC 480W (Support power distribution) |
| Charge Current | 0.1~15A x 2 |
| Discharge Power | Internal Discharge: 15W x 2 (Balance port 10W x 2), External Discharge: 325W x 2 (650W) |
| Battery Type | LiHV/LiPo/LiFe/Lilon/Lixx: 1~6S, NiZn/NiCd/NiMH: 1~16S, Smart Battery: 1~6S, Lead Acid (Pb): 1~12S (2~24V), Eneloop: 1~16S |
| Balance Current | 1600mA x 2 |
| Discharge Current | 0.1~3A x 2 |
| Combined Charging Power | 500W |
| Combined Charging Current | 0.1~22A |
| USB Output | 5V / 2.1A |
| Storage Temperature | -20~60°C |
| Operating Temperature | 0-40°C |
| Dimensions | 116mm x 116mm x 85mm |
| Net Weight | 800g approximate |
6. Setup
- Power Connection:
- AC Power: Connect the provided AC power cable to the AC in Port on the charger and then to a suitable wall outlet (AC 100-240V).
- DC Power: Alternatively, connect a DC power source (10.5-30V) to the DC in Port. Ensure the DC power source can provide sufficient current for your charging needs.
- Battery Connection:
- For each battery you wish to charge, connect its main power lead (e.g., XT60 connector) to the corresponding Battery Port (CH1 or CH2 OUT).
- Connect the battery's balance lead to the appropriate Balance Port (CH1 or CH2) next to the main output port. Ensure the balance lead is inserted correctly, matching the pin configuration.
- Initial Power On:
- Once power is connected, the charger will power on. Use the Speed Shuttle Key (typically a rotary dial with a push function) to navigate the menu and confirm selections.
7. Operating Instructions
The HOTA S6 Ultra features an intuitive interface controlled primarily by the Speed Shuttle Key.
7.1. Menu Navigation
- Rotate: Turn the Speed Shuttle Key left or right to scroll through menu options or adjust values.
- Press: Press the Speed Shuttle Key to select an option or confirm a setting.
- Long Press: A long press may be used for specific functions, such as exiting a menu or starting a process.
7.2. Charging Batteries
- Select Channel: Use the Channel Switch or menu to select Channel 1 (CH1) or Channel 2 (CH2) for operation.
- Choose Battery Type: Navigate to the 'Battery Type' setting and select the correct chemistry for your battery (e.g., LiPo, LiFe, LiHV, NiMH, Pb).
- Select Charging Mode: Choose your desired charging mode:
- Charge: Standard charging.
- Balance Charge: Charges and balances individual cells for optimal performance and safety (recommended for LiPo/LiFe/LiHV).
- Fast Charge: Charges faster but may not balance cells as thoroughly.
- Storage: Charges or discharges the battery to a safe storage voltage.
- Set Current and Cell Count: Adjust the charging current (in Amps) and the battery's cell count (e.g., 3S, 4S, 6S) to match your battery's specifications.
- Start Charging: Confirm all settings and press the Speed Shuttle Key to start the charging process. The display will show real-time charging data.
7.3. Discharging Batteries
- Select Channel and Battery Type: As with charging, select the channel and correct battery type.
- Select Discharge Mode: Choose 'Discharge' from the menu.
- Set Current and Voltage: Adjust the discharge current and the target discharge voltage.
- External Discharge (if applicable): For higher discharge power (up to 650W per channel), connect an external discharge resistor to the designated external discharge port (if available and supported by your model).
- Start Discharging: Confirm settings and press the Speed Shuttle Key to begin discharging.
7.4. Using the USB Output
The USB-A port provides 5V/2.1A output for charging mobile devices or powering small electronics.
7.5. Independent Output Interface (XT60-F)
The XT60-F port can provide power to external devices such as FPV goggles or monitors. Ensure the connected device's voltage and current requirements are within the charger's capabilities.
8. Maintenance
- Cleaning: Regularly wipe the charger's exterior with a soft, dry cloth. Do not use solvents or abrasive cleaners. Ensure no dust or debris accumulates in the fan vents.
- Storage: Store the charger in a cool, dry, and dust-free environment when not in use.
- Firmware Updates: Periodically check the manufacturer's website for firmware updates. Updates can typically be performed via the 'Upgrade Port' (USB-C or Micro USB, depending on model) using a computer.
9. Troubleshooting
- Charger does not power on:
- Check if the AC power cable or DC input is securely connected and the power source is active. Ensure the Speed Shuttle Key is pressed to initiate power on if required.
- Error message on screen:
- Refer to the specific error code or message displayed. Common errors include 'Connection Break', 'Cell Count Error', 'Battery Type Mismatch', or 'Overheat'. Disconnect the battery, check connections, and ensure settings match the battery specifications. Allow the charger to cool if an overheat warning is present.
- Battery not charging/discharging:
- Verify that the main power leads and balance leads are correctly and securely connected. Double-check the selected battery type, cell count, and current settings. Ensure the charging process has been initiated from the menu.
- Charger is hot during operation:
- Some heat generation is normal during high-power operation. Ensure the charger has adequate ventilation and the fan is operating. If it becomes excessively hot or displays an overheat warning, stop operation and allow it to cool.
10. User Tips
- Always verify the battery's voltage and cell count manually before starting any charging or discharging process, especially for LiPo batteries, to prevent damage.
- For optimal battery life and safety, always use the 'Balance Charge' mode for LiPo, LiFe, and LiHV batteries.
- When using DC input, ensure your power supply can deliver the required voltage and current for the desired charging power.
- Keep your charger's firmware updated to benefit from the latest features and improvements.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact your original point of purchase. You may also visit the official HOTA website for further assistance and contact details.