Introduction
The BRS-TS20 Reactor Burner is a portable, integrated gas stove designed for outdoor activities such as mountaineering, camping, and cooking. It features infrared combustion, a windproof design, and high thermal efficiency, making it suitable for low temperature and high altitude environments. This manual provides essential information for the safe and efficient use of your BRS-TS20 Reactor Burner.

Safety Warnings
Failure to follow these safety warnings may result in serious injury or death.
- This product is for outdoor use only or in a well-ventilated environment. It is strictly prohibited to use in tents, cars, rooms, or other enclosed environments.
- Avoid use in direct sunlight or other high-temperature environments.
- Stop using immediately if any gas leakage is detected.
- The structure of this product is precise; do not modify it yourself to avoid danger.
- It is strictly prohibited to disassemble or install the gas tank when the flame is not extinguished, and it is strictly prohibited to do so near an open flame.
- Keep away from flammable and explosive materials.
- When lighting, do not place your body (especially head and hands) above the stove to avoid burns.
- The metal parts of the burner head become very hot during use and for up to 5 minutes after use. Do not touch them.
- Used gas canisters cannot be refilled; attempting to do so may lead to accidents.
- Children under 12 years of age should not use this product alone.
Product Overview
The BRS-TS20 Reactor Burner is designed for efficiency and portability. Key features include:
- Infrared Combustion: Provides efficient and windproof heating.
- High Thermal Efficiency: Up to 70%, capable of boiling 1 liter of water in approximately 3 minutes with a gas consumption of about 79 g/h.
- Altitude Performance: Tested and proven at altitudes up to 4860 meters.
- Multi-functional: Can also be used as a heater, converting heat energy into infrared radiation.
- Integrated Pot Set Support: Compatible with various pot sizes (1L, 1.7L, 2.5L) for different user capacities.
- Durable Pot Body: Hard alumina pot body with wear, high temperature, and corrosion resistance. Features 2mm thickness for frying/baking and 1mm for stewing.
- Energy-Concentrating Loop Heat Collection System: Enhances fuel efficiency and heat retention with a tight-fit windshield design.
- Nested Storage: Components are designed for compact and easy transport.



Specifications
| Feature | Detail |
|---|---|
| Product Name | BRS-TS20 Reactor (integrated) |
| Ignition Method | External fire source |
| Fuel Type | Butane gas, propane gas |
| Combustion Power | 1.1 kW |
| Gas Consumption | Approx. 79 g/h |
| Material | Stainless steel, Aluminum alloy, copper, etc. |
| Thermal Efficiency | Up to 70% (CE standard not less than 50%) |
| Weight | 0.214 kg |
| Storage Size | Φ105 mm (diameter) x 75 mm (height) |
| Package Dimensions | 13 cm (L) x 13 cm (W) x 9 cm (H) |
| Package Weight | 0.33 kg |
Note: There may be slight errors in manual measurements. Please refer to the actual product.

Setup
Follow these steps to set up your BRS-TS20 Reactor Burner:
- Take out Valve Switch: Locate and remove the valve switch from its storage position.
- Install Gas Tank:
- Confirm that the valve is in the clockwise closed position.
- Connect the valve body with the gas tank and tighten it securely.
NOTICE: Before ignition, please check for any gas leakage. If you detect an odor (like onion), stop ignition immediately and ensure all connections are secure in a well-ventilated area.

Operating Instructions
Ignition
- Turn the valve switch counterclockwise to open (do not open too wide initially).
- Use an external fire source (e.g., lighter, match) to ignite the furnace head.
NOTICE: Do not place your head or any other body parts directly above the stove during ignition.
Closing the Stove
- Turn the valve clockwise to close and extinguish the flame.
- Allow the stove to cool completely for at least 5 minutes before handling.
- Once cooled, unscrew the stove head from the gas tank.
Maintenance
- Keep the stove dry, clean, and free from corrosion.
- Discoloration of the furnace surface during use is normal and does not indicate a defect.
- Before each use, check the O-seal rubber ring at the connection between the valve body and the gas tank to ensure it is present and intact.
- Keep the connection between the valve body and the tank clean to prevent blocking the gas airway.
- Always separate the stove from the gas tank before storing.
Troubleshooting
- Gas Leakage: If you detect any gas odor, immediately turn off the gas supply, move to a well-ventilated area, and check all connections. Do not attempt to ignite the stove if a leak is suspected.
- Flame Floating / Metal Sponge Not Burning Red: This can occur with new gas tanks or in high-temperature environments where pressure is high.
Solution: Turn down the valve slightly and wait 1-3 minutes for the flame to settle into the metal net. Then, adjust the gas volume for proper ignition within the network.
User Tips
- Always ensure proper ventilation when using the stove, even outdoors, to prevent carbon monoxide buildup in enclosed spaces.
- For optimal performance and fuel efficiency, especially in cold or windy conditions, utilize the integrated heat collection system and ensure the pot fits snugly.
- Consider carrying a separate burner bracket (if not included in your set) for compatibility with a wider range of cookware.

Frequently Asked Questions (FAQ)
- Q: Can I use this stove indoors?
- A: No, this stove is designed for outdoor use only in well-ventilated areas. Using it indoors or in enclosed spaces is strictly prohibited due to the risk of carbon monoxide poisoning.
- Q: What type of gas canister does this stove use?
- A: It uses standard butane gas or propane gas canisters.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact the manufacturer or your authorized retailer. Please retain your purchase receipt as proof of purchase.
A detailed user manual in PDF format may also be available for download from the seller's website or by contacting customer support. (Reference: User manual (PDF))