1. Introduction
Thank you for choosing the Miwayer WS-4 Wireless Guitar System. This system provides high-definition 2.4GHz digital audio transmission, offering freedom from wired connections for your electric guitar, bass, and other compatible electronic instruments. With its long battery life, rotatable head, and multiple channels, the WS-4 is designed for convenience and superior sound quality. Please read this manual carefully to ensure proper use and optimal performance of your device.
2. Package Contents
Please check the package to ensure all items are present:
- 1 x WS-4 Transmitter
- 1 x WS-4 Receiver
- 1 x Type-C Dual-Head USB Charging Cable
- 1 x User Manual


3. Product Overview
The Miwayer WS-4 system consists of a transmitter and a receiver, both featuring a 6.35mm audio plug and a compact design. Key features include:
- 2.4GHz HD Digital Audio Transmission: Ensures pure and authentic sound quality with 48K/16bit concert-grade audio.
- Long Battery Life: Up to 10 hours of continuous use on a single charge.
- 282-Degree Rotatable Head: Allows for easy connection to various instruments.
- 8 Channels: Supports up to 8 devices simultaneously without pairing.
- Long Transmission Range: Up to 40 meters outdoors and 20 meters through walls.


4. Charging the Device
The WS-4 system is equipped with rechargeable lithium batteries. Before first use, or if the device has not been used for a long time, please charge it for at least 10 minutes to activate the battery.
- Connect the Type-C dual-head USB charging cable to both the transmitter and receiver.
- Plug the other end of the USB cable into a standard USB power adapter (not included) or a computer's USB port.
- The charging indicator lights will illuminate.
- A full charge takes approximately 2 hours and provides up to 10 hours of continuous usage.

5. Setup Instructions
Setting up your Miwayer WS-4 Wireless Guitar System is quick and easy:
- Charge Devices: Ensure both the transmitter and receiver are fully charged (refer to Section 4).
- Power On: Press and hold the power button on both the transmitter and receiver until the indicator lights turn on.
- Select Channel: Both the transmitter and receiver have channel selection buttons (CH). Press the CH button on both units to select the same channel (e.g., Channel 1 on transmitter and Channel 1 on receiver). The system does not require pairing; simply match the channels.
- Connect Transmitter: Plug the transmitter's 6.35mm audio plug into your instrument's output jack (e.g., electric guitar, bass). The 282-degree rotatable head allows for flexible positioning.
- Connect Receiver: Plug the receiver's 6.35mm audio plug into your amplifier, mixer, or audio interface's input jack.
- Test Connection: Play your instrument. If the connection is successful, you should hear your instrument's sound through the connected audio device. Adjust volume levels as needed on your instrument and amplifier.

6. Operating Instructions
Once set up, operating the WS-4 system is straightforward:
- Channel Selection: If you experience interference or wish to use multiple WS-4 systems simultaneously (up to 8 sets), press the 'CH' button on both the transmitter and receiver to cycle through the available 8 channels until you find a clear one or match the desired channel for each set.
- Power On/Off: Press and hold the power button on each unit to turn it on or off.
- Signal Indicators: Observe the signal indicators on both units to confirm a stable connection.
- Range: The system offers a transmission distance of up to 40 meters in open outdoor environments and approximately 20 meters through walls. Maintain a clear line of sight for optimal performance.


7. Maintenance
To ensure the longevity and optimal performance of your WS-4 Wireless Guitar System, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the transmitter and receiver. Do not use abrasive cleaners, solvents, or harsh chemicals.
- Storage: When not in use, store the devices in a cool, dry place away from direct sunlight, extreme temperatures, and humidity.
- Battery Care: For long-term storage, charge the batteries to about 50% every few months to prevent deep discharge and prolong battery life.
- Avoid Impact: Protect the units from drops and impacts, which can damage internal components.
- Moisture: Keep the devices away from water and other liquids. If they come into contact with liquid, power them off immediately and allow them to dry completely before attempting to use them again.
8. Troubleshooting
If you encounter issues with your WS-4 system, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or intermittent sound | Low battery Incorrect channel selection Out of range Interference Loose connection | Charge both units fully. Ensure transmitter and receiver are on the same channel. Move closer to the receiver. Change to a different channel. Ensure plugs are fully inserted into instrument and amplifier. |
| Units won't turn on/charge/flash | Battery in protection mode (after long storage) | Charge the product for at least 10 minutes to activate the battery. |
| Poor sound quality (noise, dropouts) | Interference from other 2.4GHz devices Obstructions between units Weak signal | Change to a different channel. Ensure clear line of sight; avoid thick walls or metal objects. Move units closer together. |
| Cannot connect multiple systems | All systems on the same channel | Assign a unique channel to each transmitter/receiver pair. The system supports up to 8 simultaneous sets. |
9. Specifications
| Feature | Specification |
|---|---|
| Sample Rate | 48K/16bit high definition transmission |
| Transmission Band | 2.4GHz ISM |
| Transmission Distance | 40m/131ft outdoors, 20m/66ft through walls |
| Transmission Latency | ~12.5ms |
| THD+Noise | -98dB |
| THD | <0.02% |
| Dynamic Range | >105dB |
| Frequency Response | 20-20KHz; +1dB/-3dB |
| Rotation Angle | 282º |
| Supported Device Groups | 8 at the same time |
| Battery Type | Rechargeable lithium batteries with short-circuit protection |
| Battery Capacity (Tx/Rx) | 480mAh |
| Charging Cable | 1 in 2 out Type-C USB charge cable |
| Full Charge Time | Approx. 2 hours |
| Usage Time | Up to 10 hours |
| Product Material | ABS plastic |
| Single Product Size | 4 x 3 x 13 cm (1.6 x 1.2 x 5.1 inches) |
| Product Color Options | Black, White |
10. User Tips
- Optimal Placement: For the best signal, try to keep the transmitter and receiver in a relatively clear line of sight, especially in environments with many obstacles or other wireless devices.
- Channel Scan: If you experience any audio dropouts or interference, try cycling through the available channels on both units to find the clearest frequency.
- Instrument Compatibility: The 6.35mm audio plug is standard for most electric instruments. Ensure a snug fit to prevent signal loss.
- Charging Reminder: Always fully charge your units before important performances or long practice sessions to avoid unexpected power loss.
11. Warranty and Support
Miwayer products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your purchase or contact your retailer. If you encounter any issues or have questions not covered in this manual, please reach out to Miwayer customer support through the contact information provided on our official website or through your purchase platform.
Please retain your proof of purchase for warranty claims.