1. Product Overview
The Feker G108 is a 108-key full-size mechanical keyboard kit featuring a gasket top aluminum alloy CNC construction. It supports three connectivity modes (Wired, 2.4G Wireless, Bluetooth) and includes a customizable screen, hot-swappable switches, and RGB lighting. The modular design allows for easy customization and maintenance.

2. Package Contents
The Feker G108 Mechanical Keyboard Kit comes with the following components. Please verify all items are present upon unboxing:
- Keyboard Kit (unassembled or partially assembled, depending on variant)
- USB Type-C Cable (1.5M braided)
- Switch Puller
- Cleaning Cloth
- Instruction Manual / Quick Start Guide
- TOP Screws (for assembly)
- Silicone Feet (6 pieces)
- Replacement Switches (9 pieces, for Kit Two and Finished Product variants)
- Replacement Keycaps (30 pieces, including 23 PC transparent keycaps, for Finished Product variant)

3. Setup Instructions
3.1. Assembly (if applicable)
If you have received a kit variant, assembly of switches and keycaps will be required. The keyboard features a GASKET and TOP Dual Structure for optimal typing feel.
- Disassembly/Modular Design: The keyboard features a true modular design. Screens and decorative nameplates can be freely swapped. The top-right corner includes a physical multi-functional knob for volume adjustment and one-key mute.
- Quick-Release Structure: The heavy-duty aluminum alloy top/bottom covers integrate a precision ball catch quick-release mechanism. This allows for easy opening and closing without tools, using high-toughness stainless steel ball bearings and specially designed limit slots.
- Switch Installation: Align the pins of your desired hot-swappable switches with the sockets on the PCB. Gently press down until the switch is seated firmly.
- Keycap Installation: Place the keycaps onto the installed switches, ensuring they are properly aligned.


3.2. Connectivity
The Feker G108 supports three connection modes: Wired, 2.4G Wireless, and Bluetooth.

3.2.1. Wired Connection
Connect the provided USB Type-C cable from the keyboard to an available USB port on your computer. The keyboard will be automatically detected and ready for use.
3.2.2. 2.4G Wireless Connection
Plug the 2.4G USB receiver into an available USB port on your computer. Switch the keyboard to 2.4G mode (refer to the keyboard's physical switch or function key combination). The keyboard should connect automatically.
3.2.3. Bluetooth Connection
- Switch the keyboard to Bluetooth mode (refer to the keyboard's physical switch or function key combination).
- On your device (computer, laptop, tablet), go to Bluetooth settings and search for new devices.
- Select 'Feker G108' (or similar name) from the list of available devices to pair.
- Follow any on-screen prompts to complete the pairing process.
4. Operation
4.1. TFT Visual Window (Screen)
The keyboard features a 1.14-inch HD secondary screen that intuitively displays various system information such as time, date, battery level, and connection status. It also supports player-customized display settings.

4.2. ARGB Lighting
The keyboard supports 16.8 million color ARGB lighting, allowing for extensive customization of lighting effects to match your preferences.

4.3. Multi-functional Knob
The top-right knob provides convenient control for volume adjustment and one-key mute functionality.
4.4. Operating System Compatibility
The keyboard supports switching between Windows and Mac modes freely, ensuring compatibility with various operating systems.

4.5. Web Driver Software
Utilize the FEKER self-developed web driver for advanced customization. This driver allows for one-click modification of key functions, custom lighting effects, custom display screen content, and custom dot matrix screen displays. It is designed for simple and easy operation.

5. Maintenance
5.1. Cleaning
- Use the provided cleaning cloth or a soft, lint-free cloth to wipe down the keycaps and keyboard surface.
- For deeper cleaning, keycaps can be removed using a keycap puller and washed with mild soap and water. Ensure they are completely dry before reattaching.
- Use a switch puller to remove switches for cleaning or replacement.
- Avoid spraying cleaning solutions directly onto the keyboard.
5.2. Modular Component Care
The modular design allows for easy replacement of switches, keycaps, screens, and decorative nameplates. Handle these components with care during removal and installation to prevent damage.
6. Troubleshooting
- Keyboard not responding: Ensure the keyboard is properly connected (wired, 2.4G receiver, or Bluetooth paired). Check battery level if using wireless modes.
- Keys not registering: Verify switches are fully seated. If a specific key is not working, try swapping the switch with a known working one to diagnose if the issue is with the switch or the PCB.
- Lighting issues: Check lighting settings via the web driver software. Ensure ARGB is enabled and configured correctly.
- Connectivity issues (2.4G/Bluetooth): Try re-pairing the device. Ensure no interference from other wireless devices. For 2.4G, try a different USB port.
- Screen not displaying: Ensure the screen module is correctly installed. Check for any software settings related to the screen display in the web driver.
7. Specifications
| Feature | Detail |
|---|---|
| Product Name | G108 3-Mode CNC Aluminum Mechanical Keyboard |
| Kind | 3-Mode Kit One, 3-Mode Kit Two, 3-Mode Finished Product |
| Shell Material | National standard 6063 aluminum alloy |
| Structure | GASKET and TOP Dual Structure |
| Keycap (Finished Product) | Enrong 1.8mm Wall Thickness PBT Dye-Sublimation Keycaps |
| Axis Options | Huaxun PRO Switch, Retro R Click Switch, Peach Pink Light Silent Switch, Muffled Switch, Crisp Click Switch, Silent Muffled Switch, Muffled Thunder Switch for Large Keys |
| Lighting | 16.8 million Colorful ARGB Lighting |
| Number of Keys | 108 Keys |
| PCB | 1.2mm Single Key Slot |
| Positioning Plate | PC positioning plate |
| Decorative Parts | Aluminum alloy knob, 1.14-inch color screen, 7x7 dot matrix screen, Anodized decorative nameplate |
| Driver | Webpage (driver for adjustable screen + dot matrix screen) |
| Battery Capacity | 10000mAh Li-ion |
| Filling | PORON sandwich cotton + IXPE switch pad + PET sound-dampening pad + PORON bottom cotton + bottom sound-dampening pad |
| Dimensions (L x W x H) | 447.4 x 139.5 x 20 (front height) / 35.2 (rear height) mm |
| Net Weight | ~1940g (Kit One), ~2019g (Kit Two), ~2338g (Finished Product) |
| Interface Type | USB (Wired), 2.4Ghz Wireless, Bluetooth |
| Application | Desktop, Laptop, Number, Tablet |
| Operation Style | Mechanical |
| Language | English |
| Full Size Keyboard | Yes |
| Battery Included | Yes |


8. User Tips
- Experiment with Switches: The hot-swappable design allows you to easily try different switch types to find your preferred typing feel and sound.
- Customize Your Display: Utilize the web driver to personalize the TFT screen with custom information or graphics.
- Optimize Connectivity: Choose the connection mode (wired, 2.4G, Bluetooth) that best suits your current setup for optimal performance and battery life.
- Explore ARGB Effects: Dive into the web driver's lighting settings to create unique and dynamic RGB patterns.
9. Warranty and Support
For technical support, driver downloads, or warranty inquiries, please refer to the official Feker website or contact your retailer. Keep your proof of purchase for warranty claims.