JIKONG JK-B1A8S10PHC

Contents

JIKONG JK-B1A8S10PHC Smart Active BMS User Manual

Intelligent Battery Management System for 4S-8S LiFePO4, Li-ion, and LTO Batteries

1. Introduction

The JIKONG JK-B1A8S10PHC is a Smart Active Battery Management System (BMS) designed for efficient and reliable management of 4S-8S battery packs, including LiFePO4, Li-ion, and LTO chemistries. This BMS features active balancing, comprehensive protection functions, and versatile communication options, making it suitable for a wide range of applications from e-bikes to RV energy storage systems.

JIKONG JK-B1A8S10PHC Smart Active BMS with key features
Figure 1: JIKONG JK-B1A8S10PHC Smart Active BMS overview, highlighting functions like BT/Display, HEAT/CANBUS, 1A balancing current, 4S-8S battery string support, and 100A charge/discharge current. It also supports inverter protocols.

Key features include:

  • Active Balancing (Lossless Balancing) with 1A-2A current.
  • Support for 4S-8S battery configurations (Li-ion, LiFePO4, LTO).
  • 100A continuous charge/discharge current.
  • Multiple communication interfaces: Bluetooth (BT), RS485, CANBUS, NTC, Soft Switch, Key Switch, SOC Indicator, Active Equalizer.
  • Comprehensive protection: Overcharge, Over Discharge, Overcurrent, Short Circuit, Temperature Protection.
  • Compatibility with mainstream inverter communication protocols.
  • Mobile APP (iOS/Android/HarmonyOS) and PC software for monitoring and parameter adjustment.
  • Durable aluminum alloy shell for superior heat dissipation.

2. Safety Information

Please read and understand all safety instructions before installing or operating the JIKONG JK-B1A8S10PHC BMS. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.

  • Always disconnect the battery pack from any power sources before installation or maintenance.
  • Ensure all wiring connections are correct and secure to prevent short circuits or damage.
  • Wear appropriate personal protective equipment (PPE), including insulated gloves and eye protection, when working with batteries.
  • Do not attempt to open or modify the BMS unit. Refer all servicing to qualified personnel.
  • Keep the BMS away from water, moisture, and flammable materials.
  • Ensure adequate ventilation around the BMS and battery pack to prevent overheating.
  • Verify battery cell count and type compatibility with the BMS before connection.

3. Package Contents

Verify that all items are present in your package:

  • 1 x JIKONG Smart Active BMS unit
  • 1 x Sampling line (70cm long)
  • 1 x NTC temperature sensor (40cm long)
  • 1 x Switch (50cm long)
JIKONG BMS Packing List
Figure 2: Contents of the JIKONG BMS package, including the BMS unit, sampling line, NTC temperature sensor, and switch.

4. Specifications

The following table details the technical specifications for the JIKONG JK-B1A8S10PHC Smart Active BMS:

JIKONG BMS Product Parameters Table
Figure 3: Detailed product parameters for JIKONG BMS models, including the JK-B1A8S10PHC.
JIKONG Product Specifications (JK-B1A8S10P/PHC)
Technical IndexJK-B1A8S10PJK-B1A8S10PHCJK-B2A8S20PJK-B2A8S30P
Number of Battery Strings (Li-ion)3S-8S3S-8S3S-8S3S-8S
Number of Battery Strings (LiFePO4)4S-8S4S-8S4S-8S4S-8S
Number of Battery Strings (LTO)6S-8S6S-8S6S-8S6S-8S
Balance MethodActive Balance (Full State On)
Balance Current1A1A2A2A
Conductive Resistance in Main Circuit0.3mΩ0.3mΩ0.3mΩ0.3mΩ
Continuous Discharge Current100A100A200A300A
Continuous Charge Current100A100A200A300A
Maximum Discharge Current (MAX 2min)200A200A300A400A
Over Charge Protection10-100A10-100A10-200A10-300A
Other Interfaces (Customized)RS485RS485RS485RS485
Other Interfaces (Customized)CANBUS HEATCANBUS HEATCANBUS HEATCANBUS HEAT
Size (mm)155*126*18mm155*126*18mm189*94*24mm189*94*24mm
Wiring OutputCommon Port
Single Coil Voltage Range1-5V
Voltage Acquisition Accuracy±5mV
Over Charge Protection Voltage1.2-4.35V Adjustable
Over Charge Release Voltage1.2-4.35V Adjustable
Over Current Detect Delay2-120S Adjustable
Over Discharge Protection Voltage1.2-4.35V Adjustable
Over Discharge Release Voltage1.2-4.35V Adjustable
Quantity of Temperature Detection1 Pcs.
Temp ProtectionYes
Short Circuit ProtectionYes
Coulomb CounterYes
Bluetooth FunctionSupport for Android iOS

Additional specifications:

  • Voltage detection accuracy: ±0.015V
  • Short circuit protection response: 10-500μs
  • Shell Material: Fully aluminum alloy for superior heat dissipation.
  • Dimensions (JK-B1A8S10P/PHC): Approximately 87mm (width) x 153.9mm (length) x 17.6mm (thickness).

5. Installation and Wiring

Careful installation and correct wiring are crucial for the safe and proper operation of your BMS. Please follow these steps precisely.

5.1 General Wiring Steps

  1. Connect all balance cables to the battery cells first, ensuring correct polarity and sequence (1S, 2S, 3S, etc.).
  2. Insert the balance cable connector into the BMS.
  3. Connect the B- line (total negative electrode) from the battery pack to the B- terminal on the BMS.
  4. Connect the P- line (total positive electrode) from the battery pack to the P- terminal on the BMS.
  5. Connect your load (e.g., motor, inverter) and charger to the appropriate P+ and P- terminals as shown in the diagrams.

5.2 Wiring Diagrams

Refer to the following diagrams for specific wiring configurations based on your battery string count.

5.2.1 Wiring Method for 8-String Cells

Wiring diagram for 8-string battery cells with JIKONG BMS
Figure 4: Wiring diagram illustrating connections for an 8-string battery pack to the JIKONG BMS. Shows individual cell connections (1S-8S), total negative (B-) and positive (P-) electrodes, and connections for inverter/charger/motor load.

5.2.2 Wiring Method for 4-String Cells

Wiring diagram for 4-string battery cells with JIKONG BMS
Figure 5: Wiring diagram illustrating connections for a 4-string battery pack to the JIKONG BMS. Shows individual cell connections (1S-4S), total negative (B-) and positive (P-) electrodes, and connections for inverter/charger/motor load.

5.3 Communication Board Connection

The BMS supports external communication boards for enhanced functionality, such as RS485 or CANBUS. Connect these boards to the designated ports on the BMS.

JIKONG BMS connected to a communication board
Figure 6: JIKONG BMS connected to an external communication board, demonstrating the physical connection.
JIKONG RS485 Interface Board
Figure 7: Close-up view of the JIKONG RS485 Interface Board, showing its ports.

6. Operation

The JIKONG Smart Active BMS offers intelligent monitoring and control through its mobile application and PC software.

6.1 Mobile APP (JIKONG SMART BMS)

The mobile application is available for iOS, Android, and HarmonyOS devices. It allows for real-time monitoring of battery parameters and adjustment of certain settings.

  • Download: Scan the QR code on the BMS unit or visit www.jk-bms.com to download the APP.
  • Connection: Connect to the BMS via Bluetooth.
  • Monitoring: View real-time data such as total voltage, individual cell voltages, current, temperature, State of Charge (SOC), alarms, and cycle count.
  • Settings: Adjust various protection parameters and select inverter communication protocols.
JIKONG Smart BMS Mobile App and PC Software Interface
Figure 8: Multi-screen display options for the JIKONG BMS, including the mobile app, PC software, and a dedicated home storage display. The mobile app shows real-time data like voltage, current, temperature, SOC, alarms, and cycles.

6.2 PC Software (Host Computer)

For more detailed parameter adjustment and monitoring, use the PC software. This allows for fine-tuning of protection values and protocol settings.

  • Connection: Connect the BMS to your PC using the appropriate communication interface (e.g., RS485).
  • Parameter Adjustment: Freely adjust multiple protection values such as overcharge, overdischarge, overcurrent, and temperature thresholds.
  • Protocol Selection: Set inverter communication protocols (UART1, UART2, UART3, CAN) to ensure compatibility with your inverter system. Supported CAN protocols include JIKONG, NIU, China tower, Growatt, Voltronic, and WOW.
JIKONG Smart BMS PC Software Interface for parameter adjustment
Figure 9: PC software interface for the JIKONG BMS, showing various basic and advanced settings for cell count, battery capacity, voltage, current, and protocol numbers.
JIKONG Smart BMS PC Software for CAN protocol selection
Figure 10: PC software interface demonstrating the selection of inverter communication protocols, including various CAN protocols.

6.3 Active Balancing

The BMS continuously monitors cell voltages and performs active balancing to ensure all cells remain at a similar voltage level. This "lossless balancing" transfers energy from higher-voltage cells to lower-voltage cells, extending battery lifespan and improving performance without generating significant heat.

Diagram illustrating active balancing in a battery pack
Figure 11: Visual representation of active balancing, showing energy transfer between battery cells to achieve voltage equilibrium.
Table showing balance effect before and after balancing
Figure 12: Comparison table demonstrating the reduction in pressure difference across 1S-8S cells before and after active balancing, highlighting improved cell voltage uniformity.

7. Maintenance

The JIKONG BMS is designed for durability and minimal maintenance. However, following these guidelines will help ensure its longevity and optimal performance:

  • Regular Inspection: Periodically check all wiring connections for tightness and signs of corrosion or damage.
  • Cleaning: Keep the BMS unit clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
  • Environmental Conditions: Ensure the BMS operates within its specified temperature and humidity ranges. Avoid exposing it to extreme temperatures or direct sunlight.
  • Heat Dissipation: The aluminum alloy shell is designed for efficient heat dissipation. Ensure that the BMS is installed in a location with adequate airflow and that its cooling fins are not obstructed.
JIKONG BMS with aluminum alloy shell for heat dissipation
Figure 13: Illustration of the BMS's fully aluminum alloy shell, designed for superior heat dissipation and protection of internal components.

8. Troubleshooting

This section provides guidance on common issues you might encounter with your JIKONG BMS. For complex problems, please contact customer support.

ProblemPossible CauseSolution
BMS not powering on/no displayIncorrect wiring, loose connections, battery voltage too low.Check all wiring according to diagrams (Figures 4 & 5). Ensure battery voltage is within operating range. Verify balance cable connection.
Overcharge/Overdischarge protection triggeredBattery cells exceeding/falling below set voltage limits.Check individual cell voltages. Adjust protection voltage parameters via APP/PC software if necessary (refer to Section 6). Ensure charger/load is appropriate for battery.
Overcurrent protection triggeredLoad drawing too much current, short circuit in load.Reduce load. Check for short circuits in the system. Adjust overcurrent protection parameters via APP/PC software if appropriate for your application (refer to Section 6).
Temperature protection triggeredBMS or battery overheating/underheating.Ensure adequate ventilation. Check NTC sensor connection and placement. Avoid operating in extreme ambient temperatures.
Bluetooth connection issuesOut of range, interference, APP issues.Ensure device is close to BMS. Restart APP and Bluetooth on your device. Check APP permissions.
Inverter communication failureIncorrect protocol selected, wiring issues with communication board.Verify the correct inverter protocol is selected in the APP/PC software (refer to Section 6). Check wiring to the RS485/CAN communication board (Figures 6 & 7).

9. User Tips

Based on common user experiences, here are some tips for optimizing your JIKONG BMS usage:

  • Initial Setup: Always perform a thorough check of all cell voltages before connecting the balance leads to the BMS. Ensure all cells are within a reasonable voltage range to prevent excessive initial balancing.
  • Firmware Updates: Periodically check the official JIKONG website (www.jk-bms.com) for any firmware updates for your BMS or software updates for the APP/PC tool.
  • Parameter Customization: Take advantage of the adjustable protection parameters in the APP or PC software to fine-tune the BMS to your specific battery pack and application requirements. Always understand the implications of changing these settings.
  • Monitoring: Regularly monitor your battery's health through the mobile app, especially during the first few charge/discharge cycles, to ensure stable operation and proper balancing.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official JIKONG website or contact your point of purchase. Ensure you have your product model number (JK-B1A8S10PHC) and any relevant purchase details ready when contacting support.

Official Website: www.jk-bms.com

© 2024 JIKONG. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.