BONROAD Wireless CarPlay Android Auto Interface Adapter Module

Contents

BONROAD Wireless CarPlay Android Auto Interface Adapter Module

User Manual

1. Introduction

Thank you for choosing the BONROAD Wireless CarPlay Android Auto Interface Adapter Module. This device seamlessly integrates advanced smartphone functionalities like Apple CarPlay and Android Auto into your BMW MINI Cooper's original infotainment system, enhancing your driving experience with navigation, music, communication, and more. This manual provides detailed instructions for installation, operation, and troubleshooting.

BONROAD Wireless CarPlay Android Auto Interface Module installed in a MINI Cooper dashboard

Figure 1.1: BONROAD Interface Module in a MINI Cooper dashboard, showcasing Wireless CarPlay, Airplay, Android Auto, and Autolink features.

2. Compatibility

This module is designed for specific BMW MINI Cooper models equipped with either the EVO or BIS infotainment system. Please verify your car's system before installation.

  • For BMW MINI EVO/BIS system
  • BIS System: Only fits original 6.5-inch non-touch screens.
  • EVO System: Fits factory 6.5-inch, 8.8-inch, and 10.25-inch screens.

2.1 How to Check Your Car System

Refer to the image below to identify your car's system:

Diagram showing how to identify MINI Cooper BIS vs EVO system

Figure 2.1: Visual guide to distinguish between MINI BIS and EVO systems. BIS systems have no cube icon on the left side of the display and are 6.5-inch non-touch. EVO systems have a cube icon on the left side and use a 6-pin LVDS plug, fitting 6.5-inch, 8.8-inch, or 10.25-inch screens.

Close-up of MINI EVO system identification

Figure 2.2: Detailed view of EVO system identification, showing the cube icon on the left side and the 6-pin LVDS plug.

3. Package Contents

Please check that all components are present according to your car's system type:

Accessories included for BIS and EVO systems

Figure 3.1: Accessories included for BIS and EVO systems.

3.1 BIS System Accessories

  • Main box (PCB)
  • Power cable
  • Data Cable
  • FPC Cable
  • WiFi antenna
  • RCA & USB Cable

3.2 EVO System Accessories

  • Device
  • Power cable
  • USB cable
  • LVDS cable
  • WiFi antenna
  • Microphone cable

4. Setup and Installation

Warning: Installation requires disassembling parts of your car's dashboard. If you are not comfortable with this process, it is recommended to seek professional installation. Disconnect the car battery before starting any electrical work.

4.1 MINI BIS System Installation Instructions

These instructions are for 18-19 year 6.5-inch screens (without touch) in MINI vehicles.

  1. Prepare Original Main Unit:
    Removing original main unit parts

    Figure 4.1: Original main unit with screws marked for removal.

    • Remove the original shell of the main unit.
    • Remove the original host screws (5+4 screws).
    • Carefully remove the heatsink, power supply board, fan unit, and original PCB in order.
    • Remove the metal casing.
  2. Install the New PCBA:
    Installing PCBA and WiFi antenna

    Figure 4.2: Installation of the new PCBA and WiFi antenna.

    • Install the new PCBA into the main unit.
    • Plug in the FPC cable and the original car wiring.
    • Secure these connections with adhesive tape.
    • Install the WiFi antenna and secure it with adhesive tape.
  3. Reassemble the Main Unit:
    Reassembling the main unit

    Figure 4.3: Reassembly steps for the main unit.

    • Put back the original metal case, paying close attention to the FPC cable installation.
    • Put back the original PCB and plug in the FPC cable.
    • Install the fan, power supply board, and heatsink in turn.
    • After installing these components, put back all the original screws. Pay attention to the FPC cable when installing.
  4. Final Connections and Reassembly:
    Final cable connections and car shell reassembly

    Figure 4.4: Plugging in power, USB cables, and snapping back the car shell.

    • Plug in the power adapter cable, power cord, and USB cable to the main unit.
    • Carefully snap back the original car shell, ensuring all clips are secure.

4.2 Important Installation Notes

  • USB Cable: Reserve the USB cable to the passenger front storage compartment for easy access.
  • WiFi Antenna: Paste the WiFi antenna extension onto a plastic surface. Do not paste it onto metal surfaces, as this can interfere with signal reception.

5. Operating Instructions

5.1 Connecting Your Phone (Wireless CarPlay/Android Auto)

After installation, you can connect your smartphone wirelessly:

  1. On your car's display, navigate to Settings.
  2. Select Wireless CarPlay Settings or Wireless Android Auto Settings.
  3. Choose Discover and connect devices.
  4. On your smartphone, go to Bluetooth settings and search for the CarPlay/Android Auto Bluetooth name displayed on your car screen.
  5. Pair your phone with the module.
  6. Ensure both Bluetooth and Wi-Fi are enabled on your phone for wireless functionality.

5.2 Audio Settings

To ensure audio plays correctly through your car's speakers:

  1. On your car's display, navigate to Settings.
  2. Select Audio Settings.
  3. Set Use the original Bluetooth Audio to On.
  4. The factory audio source should be set to Bluetooth.

5.3 Key Features and Functions

Grid of product features icons

Figure 5.1: Overview of product features including CarPlay, Android Auto, Mirror Link, Bluetooth, Online Map, Online Music, Hands-Free Calling, Voice Control, and Reversing Camera support.

  • Wireless CarPlay & Android Auto: Enjoy seamless integration of your smartphone apps via Bluetooth or data cable.
  • Mirror Link (Airplay/Autolink): Mirror your iOS (Airplay) or Android (Autolink) phone screen directly onto your car's display for video playback and navigation.
  • Voice Control (Siri/Google Assistant): Use voice commands for navigation, music, calls, and more, keeping your hands on the wheel.
    Siri voice control in action

    Figure 5.2: Siri voice control interface on the car display.

  • Navigation Maps: Supports popular navigation apps like Google Maps, Waze, Apple Maps, Naver Map, and T Map.
    Navigation maps displayed on car screen

    Figure 5.3: Various navigation apps supported and displayed on the car screen.

  • Online Music: Stream music from apps like Apple Music, Spotify, YouTube Music, Tidal, and Amazon Music via Bluetooth.
    Online music apps on car screen

    Figure 5.4: Online music streaming services available through the module.

  • Hands-Free Calling: Make and receive calls safely through your car's system.
    Hands-free calling interface

    Figure 5.5: Hands-free calling interface on the car display.

  • Bluetooth Function: Enjoy hands-free phone calls and listen to music safely via Bluetooth.
    Bluetooth call and music functions

    Figure 5.6: Bluetooth functionality for calls and music playback.

  • Reversing Camera Support: Supports original rear camera and parking radar, aftermarket rear cameras, and front cameras with CVBS DVR.
    Reversing camera view on car screen

    Figure 5.7: Reversing camera view with parking guidelines on the car display.

  • Original Control Retention: The module retains full functionality of your original car's iDrive knob and steering wheel controls.
    Original iDrive knob and steering wheel controls

    Figure 5.8: The module integrates with the original iDrive knob and steering wheel controls.

6. Maintenance

  • Keep the car's interior, especially around the display and controls, clean and free of dust.
  • Avoid exposing the device to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
  • Do not use harsh chemicals or abrasive cleaners on the car's display or controls. Use a soft, damp cloth for cleaning.
  • Ensure all cables remain securely connected.

7. Troubleshooting

ProblemPossible CauseSolution
No sound from CarPlay/Android AutoIncorrect audio settings; phone not connected via Bluetooth for audio.Go to Settings > Audio Settings and ensure "Use the original Bluetooth Audio" is ON. Verify your phone is connected via Bluetooth for audio.
Cannot connect wirelesslyBluetooth/Wi-Fi off on phone; incorrect pairing.Ensure Bluetooth and Wi-Fi are enabled on your phone. Re-pair the device following the connection instructions. Check WiFi antenna placement (not on metal).
Display issues / Black screenLoose cable connections; incorrect system selection.Check all cable connections, especially LVDS and FPC cables. Ensure the module is compatible with your car's EVO/BIS system.
Reversing camera not working or poor qualityCamera not connected; module may not support all high-resolution cameras.Verify camera connections. If using an aftermarket camera, ensure it is compatible (CVBS DVR). The module may have limitations with very high-resolution cameras.
Controls (iDrive/steering wheel) not respondingModule not fully integrated; loose connections.Check all wiring connections. Ensure the module is correctly installed and detected by the car's system.

8. Specifications

  • Compatibility: BMW MINI Cooper F-series with EVO or BIS infotainment systems.
    • BIS: Original 6.5-inch non-touch screen.
    • EVO: Factory 6.5-inch, 8.8-inch, 10.25-inch screens.
  • Features: Wireless Apple CarPlay, Wireless Android Auto, Mirror Link (Airplay for iOS, Autolink for Android), Bluetooth, Voice Control (Siri/Google Assistant), Navigation, Online Music, Hands-Free Calling, Reversing Camera Support (original, aftermarket, front camera/CVBS DVR).
  • Control: Retains original iDrive knob and steering wheel controls.
  • Connectivity: Bluetooth, Wi-Fi, USB.

9. User Tips

  • Installation Assistance: If you find the included manual difficult to follow, search for instructional videos online (e.g., eBay or YouTube) for visual guidance. Professional installation is recommended if you are unsure.
  • Non-Touchscreen Operation: Be aware that operating navigation (Android Auto or Apple CarPlay) will require using your car's center console buttons and iDrive controller, as your original screen is not touch-sensitive. It may take some time to get accustomed to this method.
  • Connectivity Options: While the module communicates directly via Bluetooth for wireless functions, you can also connect your phone using the USB cable. Ensure the USB cable is plugged in immediately after installing the PCB and corresponding cables for optimal functionality.
  • BIS System Installation: Installation for models with the BIS system can be more involved and may not be suitable for all users. Consider professional help if you are not experienced with car electronics.

10. Frequently Asked Questions (FAQ)

Q: Is this compatible with a MINI John Cooper Works F57 Cabriolet from February 2018, with a non-touchscreen original display, GPS, and NBT EVO ID4 system (NBTevo_E17235A)?
A: Yes, based on the product description, EVO systems are compatible, especially with factory 6.5-inch, 8.8-inch, or 10.25-inch screens. The key indicators for EVO compatibility are the presence of the 6-pin LVDS plug and a 'cube icon' on the left side of your display.
Q: Is it compatible with a 2019 Mini One with an EVO 5 system and a 6.5-inch screen without touch function and without an external radio module?
A: Yes, EVO systems with 6.5-inch screens are generally compatible with this module.
Q: Does it include a specific LVDS cable for EVO 5? Does wireless Apple CarPlay work?
A: Yes, for EVO systems, an LVDS cable is included in the package. And yes, wireless Apple CarPlay is a primary feature of this module.
Q: I have a 2016 Mini Clubman F54, which CarPlay do I need?
A: You need to determine if your F54 has an EVO or BIS system. Check your car's display for a 'cube icon' on the left side and identify the type of LVDS plug (6-pin for EVO). Refer to the compatibility section (Section 2) for detailed identification.
Q: Will this work with a Mini One 2018 with a non-touch screen that is controlled via a rotary controller?
A: Yes, this system is designed to work with both BIS systems (original 6.5-inch non-touch screen, no cube icon) and EVO systems (factory 6.5-inch/8.8-inch/10.25-inch screens, cube icon, 6-pin LVDS). The rotary controller is the standard input method for these systems and will be used to control the CarPlay/Android Auto interface.

11. Warranty and Support

For warranty information, technical support, or further assistance, please refer to the seller's official channels or contact BONROAD customer service. Additional item guides and documents may be available in PDF format from the product listing page.

© 2024 BONROAD. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.