Introduction
The Feker G108 is a high-performance aluminum alloy mechanical keyboard designed for gaming and ergonomic use. It features a 108-key full-size layout, 3-mode wireless connectivity (Wired, 2.4G, Bluetooth), a Gasket Top dual structure, hot-swappable switches, and customizable RGB lighting. The keyboard also includes a 1.14-inch HD secondary TFT visual window and a multi-functional knob for enhanced user experience and personalization.
Safety Information
Please read and understand the following safety precautions before using your Feker G108 mechanical keyboard:
- Keep the keyboard away from liquids and excessive moisture to prevent damage to electronic components.
- Avoid exposing the keyboard to extreme temperatures (hot or cold) or direct sunlight.
- Do not attempt to disassemble or modify the keyboard, as this may void the warranty and cause damage.
- Use only the provided USB cable for charging and wired connection.
- Keep out of reach of small children to prevent accidental ingestion of small parts.
- Clean the keyboard with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
Package Contents
Verify that all items are present in your package. Contents may vary slightly depending on the specific kit purchased (e.g., Kit One, Kit Two, or Finished Product):
- Feker G108 Mechanical Keyboard
- USB Type-C Cable (1.5M braided)
- Switch Puller
- Keycap Puller
- Cleaning Cloth
- Instruction Manual (this document)
- Replacement Switches (quantity may vary by kit)
- Replacement Keycaps (quantity may vary by kit)
- TOP screws and silicone feet (for specific kits)
- Keyboard bag (for specific kits)
Setup Guide
1. Initial Use
- Unbox your Feker G108 keyboard and inspect for any physical damage.
- Connect the keyboard to your computer using the provided USB Type-C cable to ensure it is fully charged before initial wireless use.
2. Connectivity Modes
The Feker G108 supports three connection modes:
- **Wired Mode (Type-C):** Connect the keyboard directly to your device using the USB Type-C cable.
- **2.4G Wireless Mode:** Insert the 2.4G USB receiver into your device. The keyboard should automatically connect.
- **Bluetooth (BT) Mode:**
- Turn on Bluetooth on your device.
- Put the keyboard into Bluetooth pairing mode (refer to the keyboard's specific key combination for pairing, usually Fn + a Bluetooth key).
- Select "Feker G108" from your device's Bluetooth list to connect.
3. Modular Design & Customization
The Feker G108 features a true modular design, allowing for extensive customization:
- **Swappable Screens & Decorative Nameplates:** The 1.14-inch TFT visual window and decorative nameplates can be freely swapped. The top-right corner knob also offers multi-functional control for volume adjustment and one-key mute.
- **Hot-Swappable Switches:** The keyboard supports hot-swappable switches, allowing you to easily change mechanical switches without soldering. Use the provided switch puller for this task.
- **Push-Button Quick-Release Structure:** The heavy-duty aluminum alloy top/bottom covers integrate a precision ball catch quick-release mechanism, making disassembly and reassembly tool-free.
4. Driver Installation
For advanced customization of the screen, dot matrix display, and lighting, download the FEKER self-developed web driver from the official website. This driver allows for one-click modification and custom display settings.
Operating Instructions
1. TFT Visual Window
The 1.14-inch HD secondary screen provides an intuitive display of various system information and supports player-customized display settings. This can include time, date, connection status, and more.
2. RGB Lighting
The keyboard supports 16.8 million color ARGB lighting. Use the dedicated function keys (refer to your quick start guide for specific combinations, typically Fn + arrow keys or other designated keys) or the web driver to customize lighting effects, brightness, and speed.
3. Multi-functional Knob
The top-right corner knob typically controls volume (rotate) and mute (press). Its functionality can often be customized further via the web driver.
4. Windows/Mac Compatibility
The keyboard supports switching between Windows and Mac modes. Refer to the quick start guide or the web driver for the specific key combination (e.g., Fn + Win/Mac key) to switch operating system layouts.
Maintenance
- **Cleaning:** Regularly clean the keyboard with a soft, dry cloth. For deeper cleaning, use a keycap puller to remove keycaps and a brush or compressed air to remove dust and debris from between the switches.
- **Storage:** Store the keyboard in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
- **Battery Care:** For models with a built-in 10000mAh battery, avoid fully discharging the battery frequently. Charge it regularly to prolong battery life.
Troubleshooting
- **Keyboard not responding:**
- Check the connection: Ensure the USB cable is securely plugged in, or the 2.4G receiver/Bluetooth is properly connected and paired.
- Recharge the battery: If using wireless mode, the battery might be low.
- Try a different USB port or device.
- **Keys not registering:**
- Ensure the keyboard is not in a locked mode (e.g., gaming mode that disables certain keys).
- If using hot-swappable switches, ensure the switch is properly seated in its socket.
- Clean around the affected key to remove any debris.
- **RGB lighting not working:**
- Check lighting settings via function keys or the web driver.
- Ensure the keyboard firmware is up to date.
- **Wireless connection issues:**
- For 2.4G, ensure the receiver is close to the keyboard and there's no interference from other wireless devices.
- For Bluetooth, try re-pairing the keyboard with your device. Ensure your device's Bluetooth is enabled and discoverable.
Specifications
| Feature | Detail |
|---|---|
| Product Name | G108 3-Mode CNC Aluminum Mechanical Keyboard |
| Keyboard Standard | 108 Keys (Full Size) |
| Connectivity Type | 3-Mode Wireless (Wired, 2.4Ghz Wireless, Bluetooth) |
| Operation Style | Mechanical (Hot-swappable) |
| Shell Material | National standard 6063 aluminum alloy |
| Structure | GASKET and TOP Dual Structure |
| Battery Capacity | 10000mAh |
| Lighting | 16.8 million color ARGB Lighting |
| TFT Visual Window | 1.14-inch HD secondary screen |
| PCB | 1.2mm Single Key Slot |
| Positioning Plate | PC positioning plate |
| Keycap | Enrong 1.8mm Wall Thickness PBT Dye-Sublimation Keycaps |
| Dimensions (L x W x H) | 447.4 x 139.5 x 20 (front height) / 35.2 (rear height) mm |
| Net Weight | Approx. 1940g - 2338g (depending on kit) |
| Application | Desktop, Laptop, Number, Tablet |
| Language | English |
| Modular Features | Swappable screen/nameplate, Push-Button Quick-Release Structure |
| Driver | FEKER Self-developed Web Driver for customization |
User Tips
- **Experiment with Switches:** Since the keyboard is hot-swappable, don't hesitate to try different switch types to find your preferred typing or gaming feel.
- **Customize RGB:** Utilize the web driver to create unique lighting profiles that match your setup or mood.
- **Modular Flexibility:** Take advantage of the modular design to swap out decorative plates or screens for a personalized look.
- **Battery Management:** For optimal battery longevity, avoid completely draining the 10000mAh battery frequently. Charge it when convenient, ideally before it drops below 20%.
- **Firmware Updates:** Periodically check the official Feker website for any firmware updates to ensure optimal performance and access to new features.
Warranty and Support
For detailed warranty information and customer support, please refer to the official Feker website or contact the seller directly. A user manual in PDF format is also available for download:
For return and refund policies, please consult the seller's terms of service.