HOMCOM 851-002

Contents

HOMCOM 40L Extractable Trash Bin User Manual

Model: 851-002

1. Introduction

Thank you for choosing the HOMCOM 40L Extractable Trash Bin. This product is designed to provide an efficient and discreet waste management solution for your kitchen. Featuring three separate containers and a smooth pull-out mechanism, it facilitates differentiated waste collection and helps maintain a tidy environment. This manual provides essential information for the safe installation, operation, and maintenance of your new trash bin.

The HOMCOM pull-out trash bin installed under a kitchen sink, demonstrating its space-saving design.
Figure 1: Installed HOMCOM 40L Extractable Trash Bin

2. Safety Information

  • Read all instructions carefully before installation and use.
  • Keep packaging materials away from children to prevent choking hazards.
  • Ensure the installation surface is stable and capable of supporting the weight of the bin when full.
  • The cushioned sliding system is designed with slight resistance to prevent accidental access by children or household animals. Do not force the mechanism.
  • Do not overload the bins beyond their stated capacity.
  • Avoid placing hot ashes or flammable materials directly into the bins.
  • Clean regularly to maintain hygiene and prevent odors.

3. Package Contents

Please check that all components are present and in good condition:

  • 1 x Main pull-out frame/housing with sliding rails
  • 2 x Small 10L waste containers
  • 1 x Large 20L waste container
  • 4 x Metal plates for ground fixing
  • Instruction Manual (this document)
Overview of the pull-out trash bin system with three containers, showing the sliding mechanism.
Figure 2: Components of the Pull-Out Trash Bin System

4. Specifications

Feature Detail
Model Number 851-002
Color Grey
Material ABS, PP, Steel
Total Capacity 40 Liters (2 x 10L, 1 x 20L)
Overall Dimensions (L x W x H) 48 cm x 34.2 cm x 41.8 cm
Large Bin Dimensions (L x W x H) 30.5 cm x 22 cm x 36 cm
Small Bin Dimensions (L x W x H) 22.5 cm x 15 cm x 36 cm
Structure Built-in / Extractable
Smart Device No
Origin Mainland China
Package Weight 7.0 kg
Package Dimensions (L x W x H) 50 cm x 36 cm x 46 cm
Detailed dimensions of the entire trash bin unit (48L x 34.2P x 41.8A cm) and individual bins (small: 22.5L x 15P x 36A cm, large: 30.5L x 22P x 36A cm).
Figure 3: Product Dimensions

5. Setup and Installation

The HOMCOM Extractable Trash Bin is designed for easy installation into a cabinet, ideally one that is at least 40 cm wide. It is not suitable for sliding wardrobes, and accessories for sliding doors are not included.

Installation Steps:

  1. Choose Location: Select a cabinet with sufficient space. The overall dimensions of the unit are 48 cm (Length) x 34.2 cm (Width) x 41.8 cm (Height). Ensure there is enough clearance for the pull-out mechanism and the bins.
  2. Position the Frame: Place the main pull-out frame inside the cabinet at the desired position. Ensure it is level and aligned.
  3. Secure the Frame: Use the four metal plates provided to securely fix the main frame to the cabinet floor. Mark the drilling points, pre-drill if necessary, and then fasten the frame using appropriate screws (not included, as cabinet materials vary).
  4. Insert Bins: Once the frame is securely mounted, slide the two 10L small bins and one 20L large bin into their designated slots on the pull-out mechanism.
Detailed view of the smooth sliding mechanism and the ground fixing points for stable installation.
Figure 4: Ground Fixing Points and Sliding Mechanism
Examples of versatile installation, showing the pull-out bin in different cabinet configurations.
Figure 5: Installation Examples

6. Operating Instructions

Using your HOMCOM Extractable Trash Bin is straightforward:

  1. Pull Out: Gently pull the front of the bin unit. The entire organizer will slide out smoothly on its cushioned rails, while the lid remains stationary inside the cabinet.
  2. Differentiated Collection: Utilize the two 10L small bins for specific waste types (e.g., organic, plastic) and the 20L large bin for general waste or another category.
  3. Emptying Bins: Each bin is equipped with a metal handle for easy lifting and emptying. Simply lift the desired bin out of the frame, empty its contents, and place it back securely.
  4. Push In: Once you are finished, gently push the unit back into the cabinet until it is fully retracted. The cushioned system ensures a quiet and controlled closure.
The three bins with their respective capacities: two 10L small bins and one 20L large bin, designed for differentiated waste collection.
Figure 6: Waste Containers with Capacities
Close-up of the metal handles on the individual trash bins, facilitating easy removal and emptying.
Figure 7: Metal Handles for Easy Bin Removal

7. Maintenance

Regular maintenance will ensure the longevity and hygiene of your trash bin:

  • Cleaning Bins: Periodically remove the individual bins and wash them with warm soapy water. Rinse thoroughly and allow them to dry completely before placing them back into the frame.
  • Cleaning Frame and Rails: Wipe down the main frame and sliding rails with a damp cloth. For stubborn dirt, use a mild household cleaner. Ensure no debris obstructs the sliding mechanism.
  • Odor Control: Empty bins regularly, especially those containing organic waste, to prevent unpleasant odors. You may use bin liners and odor absorbers if desired.
  • Inspection: Occasionally check the mounting screws and sliding rails for any signs of loosening or wear. Tighten screws if necessary.

8. Troubleshooting

Problem Possible Cause Solution
Bin unit does not slide smoothly. Debris on rails, misaligned installation, or overloaded bins. Check rails for obstructions and clean them. Verify that the frame is installed level and securely. Reduce the weight in the bins.
Bins do not fit correctly into the frame. Incorrect bin orientation or foreign objects in the slots. Ensure each bin is placed in its correct slot and oriented properly. Remove any debris from the slots.
Unit feels wobbly after installation. Loose mounting screws or unstable cabinet floor. Tighten all mounting screws. If the cabinet floor is uneven, consider adding shims for stability.

9. User Tips

  • For optimal organization, label your bins (e.g., "Recycling," "Compost," "General Waste") to encourage proper sorting.
  • Use appropriately sized bin liners to keep the containers clean and simplify emptying.
  • Consider placing a small air freshener or baking soda sachet at the bottom of the bins (under the liner) to help neutralize odors.
  • Regularly check the space around the pull-out unit to ensure no items fall behind or beside it, which could obstruct its movement.

10. Warranty and Support

For warranty information or technical support, please refer to your purchase documentation or contact the retailer/manufacturer directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.