1. Introduction
Thank you for choosing the HOMCOM 120 inch 4K HD Projector Screen. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new projector screen. Designed for both home cinema and professional presentations, this screen offers a 16:9 format with a 160-degree wide viewing angle, ensuring an immersive experience. It can be conveniently fixed directly to a wall or hung from the ceiling.


2. Safety Information
Please read all instructions carefully before installation and use. Keep this manual for future reference.
- Ensure the mounting surface (wall or ceiling) is strong enough to support the weight of the projector screen.
- Use appropriate tools and hardware for installation. If unsure, consult a professional.
- Keep the screen away from direct sunlight, heat sources, and moisture.
- Do not attempt to disassemble or modify the screen.
- Keep children and pets away from the screen during operation to prevent accidental damage or injury.
3. Package Contents
Please check the package contents upon receipt to ensure all items are present and undamaged.
- 1 x HOMCOM 120 inch Projector Screen
- Mounting hardware (screws, wall anchors, hooks for ceiling mounting)
- User Manual
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | 001-017V00WT |
| Material | PVC, Metal |
| Overall Size (L x P x A) | 283 cm x 8 cm x 192 cm |
| Display Size (L x A) | 266 cm x 149 cm |
| Diagonal | 120 inches |
| Image Ratio | 16:9 |
| Viewing Angle | 160 degrees |
| Black Edge Width | 3 cm (left and right) |
| Color | White |
| Portable | No |
| Certification | None |
| Origin | IT (Italy) |



5. Setup
The projector screen offers two installation modes: wall mounting or ceiling mounting. Choose the method that best suits your environment.
5.1 Wall Mounting
- Select a suitable location on the wall, ensuring it is flat and free from obstructions.
- Hold the screen in the desired position and mark the drilling points for the mounting brackets.
- Drill holes at the marked points and insert appropriate wall anchors (if necessary).
- Securely attach the mounting brackets to the wall using screws.
- Carefully hang the projector screen onto the installed wall brackets.
5.2 Ceiling Mounting
- Identify a sturdy section of the ceiling capable of supporting the screen's weight.
- Mark the drilling points for the ceiling hooks.
- Drill holes and insert appropriate ceiling anchors.
- Screw the ceiling hooks into the anchors until secure.
- Attach the screen to the ceiling hooks, ensuring it hangs level and securely.

6. Operating Instructions
Your HOMCOM projector screen features a manual height adjustment with an automatic locking system for ease of use.
- To Extend the Screen: Gently pull the screen downwards from the handle.
- To Lock the Screen: Once the screen reaches the desired height, release the handle slowly. The automatic locking mechanism will engage, holding the screen in place.
- To Retract the Screen: Pull the screen down slightly (about 2-3 cm) and then release it. The screen will slowly and smoothly retract back into its casing. Guide it gently if needed to prevent rapid retraction.

7. Maintenance
- Cleaning the Screen Surface: Use a soft, damp cloth with mild soap and water to gently wipe the screen surface. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the screen material.
- Cleaning the Casing: Wipe the metal casing with a dry or slightly damp cloth.
- Storage: When not in use for extended periods, ensure the screen is fully retracted into its casing to protect it from dust and damage.
- Inspection: Periodically check the mounting hardware and screen mechanism for any signs of wear or damage.
8. Troubleshooting
If you encounter any issues with your projector screen, refer to the following common problems and solutions:
- Screen does not retract smoothly: Ensure the screen is pulled down slightly before releasing to activate the retraction mechanism. Check for any obstructions in the retraction path.
- Screen does not lock at desired height: Ensure you are releasing the screen slowly enough for the automatic locking mechanism to engage.
- Wavy or wrinkled screen surface: This can sometimes occur if the screen has been stored improperly or exposed to extreme temperature changes. Allow the screen to hang fully extended for a period to see if the wrinkles smooth out. Ensure proper tension during installation.
9. User Tips
- Optimal Viewing Distance: For the best viewing experience with a 120-inch screen, position your seating approximately 3 to 3.5 meters (10 to 11.5 feet) away from the screen.
- Ambient Light: For optimal image quality, minimize ambient light in the viewing area.
- Projector Placement: Ensure your projector is aligned correctly with the screen to avoid keystone effects and achieve a rectangular image.

10. Warranty and Support
For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your purchase receipt as proof of purchase.