1. Introduction
The SONGGER MD917 Series Moisture Meter is a non-destructive, pinless moisture measurement device designed for rapid detection of moisture content in building materials and industrial materials. Utilizing high-frequency electromagnetic wave sensing technology, this instrument enables surface moisture analysis without damaging walls, floors, wood panels, or paper products.
It is suitable for construction inspection, renovation projects, wood processing, packaging control, and laboratory testing.

2. Models Overview
The MD917 Series includes several models, each optimized for specific material types. All models feature non-destructive measurement, auto zero calibration, and operate on 3 AAA batteries.
- MD917plus (Wall Model): Specialized for wall surfaces, concrete, and tiles. Measuring range: 0–40%.
- MD918plus (Wood Model): Optimized for wood, timber, and lumber. Measuring range: 4–80%.
- MD919plus (Paper/Air Model): Designed for paper, cartons, and ambient air humidity. Paper range: 2–40%, Air range: 10–80% RH.
- MD920plus (Wall & Wood Model): A versatile 2-in-1 model for both wall and wood applications. Wall range: 0–40%, Wood range: 2–80%.





3. Specifications
The following table details the specifications for each model in the MD917 Series:
| Item | MD917plus (Wall) | MD918plus (Wood) | MD919plus (Paper/Air) | MD920plus (Wall & Wood) |
|---|---|---|---|---|
| Sensing Principle | High-frequency electromagnetic wave | |||
| Measuring Range | 0–40% (Wall) | 4–80% (Wood) | Paper: 2–40% Air: 10–80% | Wall: 0–40% Wood: 2–80% |
| Accuracy | ±(1%+1) | ±(1%+0.5) | Paper: ±(1%+0.5) Air: ±(2%~5%) | Max Error: ±2% |
| Resolution | 0.5% | |||
| Density Selection | 10 levels | 10 wood types | 4 paper types | 10 levels |
| Measuring Depth | 25mm | |||
| Functions | Upper limit setting, over-limit alarm, temperature compensation, low battery alert, auto temperature-zero compensation, 5-min auto shut-off | |||
| Power Supply | 3 × 1.5V AAA batteries | |||
| Operating Conditions | Temperature: 0–40°C, Humidity: 10–75% RH | |||
| Dimensions | 132 × 67 × 26 mm | |||
| Weight | 95g (excluding battery) | |||

4. Getting Started
4.1. Package Contents
- MD917 Series Moisture Meter
- User Manual (this document)
Note: Batteries (3 x AAA) may not be included in some regions due to shipping regulations. Please ensure you have them ready.
4.2. Battery Installation
- Locate the battery compartment on the back of the device.
- Open the battery cover.
- Install three AAA batteries according to the polarity markings (+/-) inside the compartment.
- Close the battery cover securely.

4.3. Device Overview
Familiarize yourself with the device's controls and display:

5. Operation
5.1. Power On and Mode Selection
- Press the MODE (Power On/Off & Mode Selection) button to turn on the device.
- Press the MODE button repeatedly to cycle through available measurement modes (e.g., Wall, Wood, Paper, Air) until the desired material type is selected. The selected category will be displayed on the LCD.
- If your model supports density adjustment (e.g., MD918plus for wood types), use the DENSITY or SWITCH buttons to select the appropriate density level or material profile for accurate readings.
5.2. Taking a Measurement
- Place the sensing area (the black pad on the back of the device) flat against the material surface you wish to measure.
- Ensure there is full contact between the sensing area and the surface, without any gaps.
- Hold the device steady during measurement.
- Avoid placing the device directly over metal surfaces, nails, or reinforced concrete bars, as this may affect accuracy. Also, avoid strong electromagnetic interference near the measuring area.
5.3. Reading Data
- Read the moisture value directly from the LCD display. The measurement reading will be shown as a percentage.
- If the measured value exceeds a preset upper limit, the alarm indicator will activate (if enabled).
The device will automatically power off after five minutes of inactivity to conserve battery life.

6. Safety and Precautions
- Do not use the instrument in explosive or highly corrosive environments.
- Avoid measuring directly over metal surfaces, nails, or reinforced concrete bars as this may affect accuracy.
- Operate only within the specified temperature (0–40 °C) and humidity (10–75% RH) range.
- Do not disassemble the device. Unauthorized modifications can void the warranty and pose safety risks.
- This device uses electromagnetic sensing technology. Do not use near sensitive medical equipment such as pacemakers.
- Do not expose the device to rain or immerse it in water.
- Risk of battery leakage or explosion if batteries are installed incorrectly. Use only AAA 1.5 V batteries.
- Keep out of reach of children.
- Proper disposal: Follow WEEE Directive 2012/19/EU for electronic waste disposal. Do not dispose of batteries in household waste; follow Battery Directive 2006/66/EC.
7. Maintenance and Storage
- Store the device in a dry and well-ventilated location.
- Keep away from direct sunlight and high humidity.
- Clean the housing with a soft, dry cloth. Do not use solvents or abrasive cleaners.
- If the device will not be used for an extended period, remove the batteries to prevent leakage and damage.
- Inspect batteries periodically for any signs of corrosion or leakage.
8. User Tips
- Understanding Measurement Depth: The MD917 Series meters measure moisture up to a depth of 25mm. Keep this in mind when assessing moisture in thicker materials or behind surfaces.
- Consistent Contact: For the most accurate readings, always ensure the sensor pad is in full, flat contact with the surface being measured. Uneven contact can lead to inconsistent results.
- Environmental Factors: While the meter has automatic temperature compensation, extreme environmental conditions (outside 0-40°C and 10-75% RH) can affect performance. Allow the meter to acclimate to the measurement environment if possible.
9. Frequently Asked Questions (FAQ)
- Q: Can I use this meter on painted or tiled walls?
- A: Yes, both MD917plus and MD920plus are designed for use on painted, tiled, or concrete surfaces without causing damage.
- Q: Which model is best for testing wood moisture?
- A: MD918plus and MD920plus are ideal for wood moisture testing. The MD918plus offers an extended range (up to 80%) and includes 10 adjustable wood density settings for higher accuracy.
- Q: Does the device need calibration before use?
- A: No manual calibration is needed. The meter features automatic temperature-zero compensation and preset settings for different material types, ensuring it's ready to use.
- Q: What is the maximum measurement depth?
- A: The MD917 Series meters can measure moisture up to a depth of 25 mm (approximately 1 inch).
10. Support and Contact Information
For technical assistance, inquiries, or bulk orders, please contact us:
- WhatsApp: +86 13311678550
- Email: miazhao008@gmali.com

A comprehensive user manual in PDF format is also available for download: View User Manual (PDF)