1. Safety Information
Please read this manual thoroughly before installation and use. Improper installation or use can cause serious injury or damage. If you have any questions, please contact a qualified professional.
- Ensure the wall structure can safely support the combined weight of the mount and your TV.
- Do not exceed the maximum weight capacity of 275 lbs (125 kg).
- Do not exceed the maximum TV size compatibility of 110 inches.
- Always use the provided hardware and follow all installation steps carefully.
- Keep children and pets away during installation.
- Periodically check the mount for any signs of wear or loosening.
2. Product Overview
This Heavy-Duty Dual Arm TV Mount is designed to provide a robust and flexible mounting solution for large televisions. It features a full motion articulating design, allowing for extensive swivel, tilt, and extension capabilities to achieve optimal viewing angles.

The mount is constructed from 3mm thick cold rolled steel with precision robot welding and 1" x 2" seamless steel tubes, ensuring durability and stability. Abrasion-resistant copper bushings are used for smooth movement.

3. Setup and Installation
Before beginning installation, ensure you have all necessary tools and that your wall type is suitable for this mount. A drilling template is included to simplify the process.
3.1. Wall Preparation
- Locate Studs: This mount is designed for installation on 16-inch to 24-inch studs. Use a stud finder to accurately locate the center of your wall studs.
- Mark Drilling Points: Use the provided drilling template to mark the precise drilling locations on your wall.
- Drill Pilot Holes: Drill pilot holes at the marked locations. Ensure the drill bit size matches the recommendations in the installation guide (typically provided with the physical product).
3.2. Mounting the Wall Plate
Attach the wall plate to the wall using the appropriate lag bolts and washers. Ensure the wall plate is level before tightening all fasteners securely.

The Sliding Bracket System allows you to center your TV seamlessly during installation, even if your wall studs are not perfectly centered.
3.3. Attaching TV Brackets
- Attach the vertical TV brackets to the back of your television using the screws that fit your TV's VESA pattern.
- Ensure the brackets are securely fastened and evenly spaced.
3.4. Hanging the TV
- Carefully lift the TV with the attached brackets and hook them onto the wall plate.
- Secure the TV to the mount using the safety screws or locking mechanisms provided.
- Utilize the 4 Lock Clips to manage wire cables for a clean, floating look.
4. Operation
This full motion TV mount allows for flexible adjustment to achieve your desired viewing angle.
4.1. Extension
Gently pull or push the TV to extend it from the wall or retract it. The mount offers an extra-long extension range of 4 to 39 inches from the wall.

4.2. Swivel
The dual arm design allows for a wide swivel range of up to 110 degrees (55 degrees left and 55 degrees right), enabling you to enjoy the perfect view from anywhere in the room.

4.3. Tilt
Adjust the tilt angle of your TV to reduce glare and create the perfect viewing angle. The mount supports a tilt range of +5 degrees (upward) to -10 degrees (downward).

5. Maintenance
To ensure the longevity and safe operation of your TV mount, follow these simple maintenance guidelines:
- Cleaning: Wipe the mount with a soft, dry cloth to remove dust. For stubborn dirt, a slightly damp cloth can be used, followed by drying. Avoid abrasive cleaners or solvents.
- Inspection: Periodically check all bolts and screws to ensure they remain tight. Over time, vibrations or adjustments can cause fasteners to loosen.
- Movement Check: Test the swivel, tilt, and extension mechanisms occasionally to ensure they operate smoothly. The abrasion-resistant copper gaskets are designed for durability, but consistent smooth movement is key.
6. Troubleshooting
If you encounter any issues with your TV mount, refer to the following common solutions:
- TV Not Level: Check the wall plate and TV brackets for proper leveling during installation. Minor adjustments can often be made by slightly loosening and re-tightening the mounting screws.
- Difficulty Moving Mount: Ensure all cables are properly managed and not obstructing movement. Check for any debris in the articulating joints.
- Mount Feels Loose: Immediately re-tighten all wall plate and TV bracket fasteners. If the issue persists, re-evaluate the wall structure and installation method.
7. Specifications
| Feature | Specification |
|---|---|
| Mounting Type | Wall Mount |
| Movement Type | Articulating (Full Motion) |
| Material | Coated Steel (3mm thick cold rolled steel, 1" x 2" seamless steel tube) |
| Color | Black |
| Compatible TV Sizes | 60 - 110 inches |
| Weight Capacity | 275 lbs (125 kg) |
| VESA Compatibility | 100x100, 200x100, 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 500x600, 600x200, 600x400, 600x600, 800x400, 800x600 |
| Wall Extension | 4 - 39 inches |
| Swivel Range | 110 degrees (55 degrees left/right) |
| Tilt Range | +5 degrees / -10 degrees |
| Stud Spacing | 16 - 24 inches |
| GTIN (UPC) | 00810041733634 |


8. Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or contact the seller directly. It is recommended to retain your proof of purchase for any warranty claims.